[Qt-creator] Confused on how to do android.

Thomas Meyer public at meyer-thomas.com
Fri Dec 13 20:17:08 CET 2013


A screen shot after pressing run.
The device changes if I connect the MeMO Pad.

btw: I have a 'Qt Widgets Aplication'

Thomas


Am 13.12.2013 20:09, schrieb Jason H:
> Woot, I found it, under Kit, Run Settings/ Deploy Configurations/ 
> Reset Default Devices.
>
> ------------------------------------------------------------------------
> *From:* Jason H <scorp1us at yahoo.com>
> *To:* Thomas Meyer <public at meyer-thomas.com>; 
> "qt-creator at qt-project.org" <qt-creator at qt-project.org>
> *Sent:* Friday, December 13, 2013 1:56 PM
> *Subject:* Re: [Qt-creator] Confused on how to do android.
>
> Well in the video, at 3:41 a dialog pops up.It's that dialog that I 
> checked the box on, and I don't want it to be checked anymore.
>
>
> ------------------------------------------------------------------------
> *From:* Thomas Meyer <public at meyer-thomas.com>
> *To:* Jason H <scorp1us at yahoo.com>; "qt-creator at qt-project.org" 
> <qt-creator at qt-project.org>
> *Sent:* Friday, December 13, 2013 1:50 PM
> *Subject:* Re: [Qt-creator] Confused on how to do android.
>
> Hi,
> I have 2 choices (so my previous wish for USB connection is not 
> necessary) for
> AVD and "direct". The entries have 2 icons. (And yes, the simulator is 
> so slow,
> that there is no fun to use!)
> Have you checked with "adb devices" in a console?
> Have you enabled the debug mode on your android device?
>
> For me, the detection works "automatically".
>
> Thomas
>
> Am 13.12.2013 19:34, schrieb Jason H:
>> New issue:
>>
>> For "Select android device" I selected the simulator AND the checkbox 
>> for always use this. However now I want to get the menu again so I 
>> can use my phoe because the simlulator is sloooow.
>>
>> How can I get the list back?
>>
>> ------------------------------------------------------------------------
>> *From:* Jason H <scorp1us at yahoo.com> <mailto:scorp1us at yahoo.com>
>> *To:* Thomas Meyer <public at meyer-thomas.com> 
>> <mailto:public at meyer-thomas.com>; "qt-creator at qt-project.org" 
>> <mailto:qt-creator at qt-project.org> <qt-creator at qt-project.org> 
>> <mailto:qt-creator at qt-project.org>
>> *Sent:* Friday, December 13, 2013 1:11 PM
>> *Subject:* Re: [Qt-creator] Confused on how to do android.
>>
>> I figured it out. The project was a QML project. I had to make it a 
>> Qt Quick application.
>>
>>
>> ------------------------------------------------------------------------
>> *From:* Thomas Meyer <public at meyer-thomas.com> 
>> <mailto:public at meyer-thomas.com>
>> *To:* qt-creator at qt-project.org <mailto:qt-creator at qt-project.org>
>> *Sent:* Friday, December 13, 2013 1:13 AM
>> *Subject:* Re: [Qt-creator] Confused on how to do android.
>>
>> Hi,
>> have a look at this video:
>> http://www.youtube.com/watch?v=_nkhlhBwkjk
>> and this site:
>> http://gennon.wordpress.com/2013/06/23/deploy-qt-to-android/
>>
>> And perhaps here:
>> http://doc-snapshot.qt-project.org/qt5-stable/deployment-android.html 
>> <http://doc-snapshot.qt-project.org/qt5-stable/deployment-android.html#androiddeployqt>
>> and here:
>> https://qt-project.org/doc/qtcreator-2.6/creator-deploying-android.html
>>
>> It would be nice to configure a USB connection, to install the apk 
>> direct, like the ADT
>> (Android Developer Tools, comes with Android SDK) or IntelliJ.
>>
>> btw: I'm an android beginner since a week.
>>
>> I hope, this helps,
>> Thomas Meyer
>>
>>
>> Am 13.12.2013 03:32, schrieb Yang Fan:
>>> Set the Android SDK & toolchain path in Android page of the 
>>> Preference dialog.
>>>
>>>
>>> On Fri, Dec 13, 2013 at 6:04 AM, Jason H <scorp1us at yahoo.com 
>>> <mailto:scorp1us at yahoo.com>> wrote:
>>>
>>>     I started a QML Desktop project.
>>>     I installed the Android SDk/NDK
>>>     I see them listed in Kits.
>>>
>>>     I cannot figure out how to run my QML on Android.
>>>     When I go to Project and "Add Kit" I see the list of Android
>>>     kits, but they are greyed out. The Tool Top says "device type is
>>>     not desktop"
>>>
>>>     How do I run my QML on Android?
>>>
>>>
>>>     _______________________________________________
>>>     Qt-creator mailing list
>>>     Qt-creator at qt-project.org <mailto:Qt-creator at qt-project.org>
>>>     http://lists.qt-project.org/mailman/listinfo/qt-creator
>>>
>>>
>>>
>>>
>>> -- 
>>> Regards,
>>> Fan Yang
>>>
>>>
>>> _______________________________________________
>>> Qt-creator mailing list
>>> Qt-creator at qt-project.org  <mailto:Qt-creator at qt-project.org>
>>> http://lists.qt-project.org/mailman/listinfo/qt-creator
>>
>>
>> _______________________________________________
>> Qt-creator mailing list
>> Qt-creator at qt-project.org <mailto:Qt-creator at qt-project.org>
>> http://lists.qt-project.org/mailman/listinfo/qt-creator
>>
>>
>>
>> _______________________________________________
>> Qt-creator mailing list
>> Qt-creator at qt-project.org <mailto:Qt-creator at qt-project.org>
>> http://lists.qt-project.org/mailman/listinfo/qt-creator
>>
>>
>
>
>
>
> _______________________________________________
> Qt-creator mailing list
> Qt-creator at qt-project.org <mailto:Qt-creator at qt-project.org>
> http://lists.qt-project.org/mailman/listinfo/qt-creator
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/qt-creator/attachments/20131213/8b7cef4f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot after Run.png
Type: image/png
Size: 33841 bytes
Desc: not available
URL: <http://lists.qt-project.org/pipermail/qt-creator/attachments/20131213/8b7cef4f/attachment.png>


More information about the Qt-creator mailing list