[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtbase#stable

Qt Continuous Integration System ci-noreply at qt-project.org
Wed Dec 12 10:57:51 CET 2012


Autotest `tst_qdbusxmlparser' failed :(

The test was determined to be flaky, meaning results were not consistent across multiple runs.  This might make the problem difficult to reproduce.  Also, flaky failures might or might not be related to any recent changes in the source code.

  Testing tst_QDBusXmlParser
  FAIL!  : tst_QDBusXmlParser::properties(one-readable) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property type="s" access="read" name="foo"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property type="s" name="foo" access="read"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(one-writable) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property type="s" access="write" name="foo"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property type="s" name="foo" access="write"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(one-read-writable) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property type="s" access="readwrite" name="foo"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property type="s" name="foo" access="readwrite"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(two-1) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property type="s" access="readwrite" name="foo"/>
   <property type="i" access="read" name="bar"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property type="s" name="foo" access="readwrite"/>
   <property type="i" name="bar" access="read"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(two-2) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property type="i" access="read" name="bar"/>
   <property type="s" access="readwrite" name="foo"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property type="i" name="bar" access="read"/>
   <property type="s" name="foo" access="readwrite"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(complex) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property type="i" access="read" name="bar"/>
   <property type="as" access="write" name="baz">
    <annotation value="Hello, World" name="foo.annotation"/>
    <annotation value="Goodbye, World" name="foo.annotation2"/>
   </property>
   <property type="s" access="readwrite" name="foo"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property type="i" name="bar" access="read"/>
   <property type="as" name="baz" access="write">
    <annotation value="Hello, World" name="foo.annotation"/>
    <annotation value="Goodbye, World" name="foo.annotation2"/>
   </property>
   <property type="s" name="foo" access="readwrite"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(complex2) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property type="as" access="write" name="baz">
    <annotation value="Goodbye, World" name="foo.annotation2"/>
    <annotation value="Hello, World" name="foo.annotation"/>
   </property>
   <property type="i" access="read" name="bar"/>
   <property type="s" access="readwrite" name="foo"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property type="as" name="baz" access="write">
    <annotation value="Goodbye, World" name="foo.annotation2"/>
    <annotation value="Hello, World" name="foo.annotation"/>
   </property>
   <property type="i" name="bar" access="read"/>
   <property type="s" name="foo" access="readwrite"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  Totals: 51 passed, 7 failed, 0 skipped
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_QDBusXmlParser *********
  Config: Using QTest library 5.0.0, Qt 5.0.0
  PASS   : tst_QDBusXmlParser::initTestCase()
  PASS   : tst_QDBusXmlParser::parsing(null)
  PASS   : tst_QDBusXmlParser::parsing(empty)
  PASS   : tst_QDBusXmlParser::parsing(junk)
  PASS   : tst_QDBusXmlParser::parsing(interface-inside-junk)
  PASS   : tst_QDBusXmlParser::parsing(object-inside-junk)
  PASS   : tst_QDBusXmlParser::parsing(zero-interfaces)
  PASS   : tst_QDBusXmlParser::parsing(one-interface)
  PASS   : tst_QDBusXmlParser::parsing(two-interfaces)
  PASS   : tst_QDBusXmlParser::parsing(one-object)
  PASS   : tst_QDBusXmlParser::parsing(two-objects)
  PASS   : tst_QDBusXmlParser::parsing(i1o1)
  PASS   : tst_QDBusXmlParser::parsing(one-interface-annotated)
  PASS   : tst_QDBusXmlParser::parsing(one-interface-docnamespace)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(null)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(empty)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(junk)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(interface-inside-junk)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(object-inside-junk)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(zero-interfaces)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(one-interface)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(two-interfaces)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(one-object)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(two-objects)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(i1o1)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(one-interface-annotated)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(one-interface-docnamespace)
  PASS   : tst_QDBusXmlParser::methods(no-methods)
  PASS   : tst_QDBusXmlParser::methods(one-method)
  PASS   : tst_QDBusXmlParser::methods(two-methods)
  PASS   : tst_QDBusXmlParser::methods(two-methods-inverse)
  PASS   : tst_QDBusXmlParser::methods(method-with-annotation)
  PASS   : tst_QDBusXmlParser::methods(one-in)
  PASS   : tst_QDBusXmlParser::methods(two-in)
  FAIL!  : tst_QDBusXmlParser::methods(two-in-one-invalid) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <method name="Method">
    <arg direction="in" type="s"/>
    <arg direction="in" type="v"/>
    <arg direction="in" name="invalid" type="~"/>
   </method>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <method name="Method">
    <arg direction="in" type="s"/>
    <arg direction="in" type="v"/>
    <arg name="invalid" direction="in" type="~"/>
   </method>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(358)]
  PASS   : tst_QDBusXmlParser::methods(one-out)
  PASS   : tst_QDBusXmlParser::methods(two-in-one-out)
  FAIL!  : tst_QDBusXmlParser::methods(one-in-with-name) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <method name="Method">
    <arg direction="in" name="foo" type="s"/>
   </method>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <method name="Method">
    <arg name="foo" direction="in" type="s"/>
   </method>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(358)]
  FAIL!  : tst_QDBusXmlParser::methods(two-in-with-name) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <method name="Method">
    <arg direction="in" name="foo" type="s"/>
    <arg direction="in" name="bar" type="i"/>
   </method>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <method name="Method">
    <arg name="foo" direction="in" type="s"/>
    <arg name="bar" direction="in" type="i"/>
   </method>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(358)]
  FAIL!  : tst_QDBusXmlParser::methods(complex) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <method name="Method1">
    <arg direction="in" name="arg1" type="s"/>
    <arg direction="in" name="arg2" type="y"/>
    <arg direction="out" type="as"/>
   </method>
   <method name="Method2">
    <arg direction="in" name="variantMap" type="a{sv}"/>
    <arg direction="in" name="index" type="u"/>
    <arg direction="out" name="key" type="s"/>
    <arg direction="out" name="value" type="v"/>
    <annotation name="foo.equivalent" value="QVariantMap"/>
   </method>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <method name="Method1">
    <arg name="arg1" direction="in" type="s"/>
    <arg name="arg2" direction="in" type="y"/>
    <arg direction="out" type="as"/>
   </method>
   <method name="Method2">
    <arg name="variantMap" direction="in" type="a{sv}"/>
    <arg name="index" direction="in" type="u"/>
    <arg name="key" direction="out" type="s"/>
    <arg name="value"
     Loc: [tst_qdbusxmlparser.cpp(358)]
  PASS   : tst_QDBusXmlParser::signals_(no-signals)
  PASS   : tst_QDBusXmlParser::signals_(one-signal)
  PASS   : tst_QDBusXmlParser::signals_(two-signals)
  PASS   : tst_QDBusXmlParser::signals_(two-signals-inverse)
  PASS   : tst_QDBusXmlParser::signals_(signal-with-annotation)
  PASS   : tst_QDBusXmlParser::signals_(one-out)
  PASS   : tst_QDBusXmlParser::signals_(one-out-no-direction)
  PASS   : tst_QDBusXmlParser::signals_(two-out-with-name)
  FAIL!  : tst_QDBusXmlParser::signals_(complex) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <signal name="Signal1">
    <arg direction="out" type="as"/>
   </signal>
   <signal name="Signal2">
    <arg direction="out" name="key" type="s"/>
    <arg direction="out" name="value" type="v"/>
    <annotation name="foo.equivalent" value="QVariantMap"/>
   </signal>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <signal name="Signal1">
    <arg direction="out" type="as"/>
   </signal>
   <signal name="Signal2">
    <arg name="key" direction="out" type="s"/>
    <arg name="value" direction="out" type="v"/>
    <annotation name="foo.equivalent" value="QVariantMap"/>
   </signal>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(472)]
  PASS   : tst_QDBusXmlParser::properties(no-signals)
  PASS   : tst_QDBusXmlParser::properties(one-readable)
  PASS   : tst_QDBusXmlParser::properties(one-writable)
  PASS   : tst_QDBusXmlParser::properties(one-read-writable)
  PASS   : tst_QDBusXmlParser::properties(two-1)
  PASS   : tst_QDBusXmlParser::properties(two-2)
  PASS   : tst_QDBusXmlParser::properties(complex)
  PASS   : tst_QDBusXmlParser::properties(complex2)
  PASS   : tst_QDBusXmlParser::cleanupTestCase()
  Totals: 53 passed, 5 failed, 0 skipped
  ********* Finished testing of tst_QDBusXmlParser *********
  QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
  QtQA::App::TestRunner:   first attempt:  exited with exit code 7
  QtQA::App::TestRunner:   second attempt: exited with exit code 5
  QtQA::App::TestRunner: the test seems to be flaky, please fix this
  QtQA::App::TestRunner: this flaky test is being treated as a FAIL
  QtQA::App::TestRunner: end tst_qdbusxmlparser: 0.05917 seconds, exit code 5

  Build log: http://testresults.qt-project.org/ci/QtBase_stable_Integration/build_00070/linux-g++-32_developer-build_Ubuntu_10.04_x86/log.txt.gz

  Tested changes (refs/builds/stable_1355303512):
    http://codereview.qt-project.org/42522 [PS1] - Accessible: Improve value interface



More information about the Ci-reports mailing list