[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qt5#release

Qt Continuous Integration System ci-noreply at qt-project.org
Mon Dec 17 11:41:44 CET 2012


Autotest `tst_qdbusxmlparser' failed :(

The test was determined to be flaky, meaning results were not consistent across multiple runs.  This might make the problem difficult to reproduce.  Also, flaky failures might or might not be related to any recent changes in the source code.

  Testing tst_QDBusXmlParser
  FAIL!  : tst_QDBusXmlParser::properties(one-readable) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property access="read" name="foo" type="s"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property name="foo" access="read" type="s"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(one-writable) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property access="write" name="foo" type="s"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property name="foo" access="write" type="s"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(one-read-writable) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property access="readwrite" name="foo" type="s"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property name="foo" access="readwrite" type="s"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(two-1) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property access="readwrite" name="foo" type="s"/>
   <property access="read" name="bar" type="i"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property name="foo" access="readwrite" type="s"/>
   <property name="bar" access="read" type="i"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(two-2) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property access="read" name="bar" type="i"/>
   <property access="readwrite" name="foo" type="s"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property name="bar" access="read" type="i"/>
   <property name="foo" access="readwrite" type="s"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(complex) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property access="read" name="bar" type="i"/>
   <property access="write" name="baz" type="as">
    <annotation name="foo.annotation" value="Hello, World"/>
    <annotation name="foo.annotation2" value="Goodbye, World"/>
   </property>
   <property access="readwrite" name="foo" type="s"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property name="bar" access="read" type="i"/>
   <property name="baz" access="write" type="as">
    <annotation name="foo.annotation" value="Hello, World"/>
    <annotation name="foo.annotation2" value="Goodbye, World"/>
   </property>
   <property name="foo" access="readwrite" type="s"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  FAIL!  : tst_QDBusXmlParser::properties(complex2) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <property access="write" name="baz" type="as">
    <annotation name="foo.annotation2" value="Goodbye, World"/>
    <annotation name="foo.annotation" value="Hello, World"/>
   </property>
   <property access="read" name="bar" type="i"/>
   <property access="readwrite" name="foo" type="s"/>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <property name="baz" access="write" type="as">
    <annotation name="foo.annotation2" value="Goodbye, World"/>
    <annotation name="foo.annotation" value="Hello, World"/>
   </property>
   <property name="bar" access="read" type="i"/>
   <property name="foo" access="readwrite" type="s"/>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(562)]
  Totals: 51 passed, 7 failed, 0 skipped
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_QDBusXmlParser *********
  Config: Using QTest library 5.0.0, Qt 5.0.0
  PASS   : tst_QDBusXmlParser::initTestCase()
  PASS   : tst_QDBusXmlParser::parsing(null)
  PASS   : tst_QDBusXmlParser::parsing(empty)
  PASS   : tst_QDBusXmlParser::parsing(junk)
  PASS   : tst_QDBusXmlParser::parsing(interface-inside-junk)
  PASS   : tst_QDBusXmlParser::parsing(object-inside-junk)
  PASS   : tst_QDBusXmlParser::parsing(zero-interfaces)
  PASS   : tst_QDBusXmlParser::parsing(one-interface)
  PASS   : tst_QDBusXmlParser::parsing(two-interfaces)
  PASS   : tst_QDBusXmlParser::parsing(one-object)
  PASS   : tst_QDBusXmlParser::parsing(two-objects)
  PASS   : tst_QDBusXmlParser::parsing(i1o1)
  PASS   : tst_QDBusXmlParser::parsing(one-interface-annotated)
  PASS   : tst_QDBusXmlParser::parsing(one-interface-docnamespace)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(null)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(empty)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(junk)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(interface-inside-junk)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(object-inside-junk)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(zero-interfaces)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(one-interface)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(two-interfaces)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(one-object)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(two-objects)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(i1o1)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(one-interface-annotated)
  PASS   : tst_QDBusXmlParser::parsingWithDoctype(one-interface-docnamespace)
  PASS   : tst_QDBusXmlParser::methods(no-methods)
  PASS   : tst_QDBusXmlParser::methods(one-method)
  PASS   : tst_QDBusXmlParser::methods(two-methods)
  PASS   : tst_QDBusXmlParser::methods(two-methods-inverse)
  PASS   : tst_QDBusXmlParser::methods(method-with-annotation)
  PASS   : tst_QDBusXmlParser::methods(one-in)
  PASS   : tst_QDBusXmlParser::methods(two-in)
  FAIL!  : tst_QDBusXmlParser::methods(two-in-one-invalid) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <method name="Method">
    <arg type="s" direction="in"/>
    <arg type="v" direction="in"/>
    <arg type="~" direction="in" name="invalid"/>
   </method>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <method name="Method">
    <arg type="s" direction="in"/>
    <arg type="v" direction="in"/>
    <arg type="~" name="invalid" direction="in"/>
   </method>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(358)]
  PASS   : tst_QDBusXmlParser::methods(one-out)
  PASS   : tst_QDBusXmlParser::methods(two-in-one-out)
  FAIL!  : tst_QDBusXmlParser::methods(one-in-with-name) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <method name="Method">
    <arg type="s" direction="in" name="foo"/>
   </method>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <method name="Method">
    <arg type="s" name="foo" direction="in"/>
   </method>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(358)]
  FAIL!  : tst_QDBusXmlParser::methods(two-in-with-name) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <method name="Method">
    <arg type="s" direction="in" name="foo"/>
    <arg type="i" direction="in" name="bar"/>
   </method>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <method name="Method">
    <arg type="s" name="foo" direction="in"/>
    <arg type="i" name="bar" direction="in"/>
   </method>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(358)]
  FAIL!  : tst_QDBusXmlParser::methods(complex) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <method name="Method1">
    <arg type="s" direction="in" name="arg1"/>
    <arg type="y" direction="in" name="arg2"/>
    <arg type="as" direction="out"/>
   </method>
   <method name="Method2">
    <arg type="a{sv}" direction="in" name="variantMap"/>
    <arg type="u" direction="in" name="index"/>
    <arg type="s" direction="out" name="key"/>
    <arg type="v" direction="out" name="value"/>
    <annotation name="foo.equivalent" value="QVariantMap"/>
   </method>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <method name="Method1">
    <arg type="s" name="arg1" direction="in"/>
    <arg type="y" name="arg2" direction="in"/>
    <arg type="as" direction="out"/>
   </method>
   <method name="Method2">
    <arg type="a{sv}" name="variantMap" direction="in"/>
    <arg type="u" name="index" direction="in"/>
    <arg type="s" name="key" direction="out"/>
    <arg type="v" name
     Loc: [tst_qdbusxmlparser.cpp(358)]
  PASS   : tst_QDBusXmlParser::signals_(no-signals)
  PASS   : tst_QDBusXmlParser::signals_(one-signal)
  PASS   : tst_QDBusXmlParser::signals_(two-signals)
  PASS   : tst_QDBusXmlParser::signals_(two-signals-inverse)
  PASS   : tst_QDBusXmlParser::signals_(signal-with-annotation)
  PASS   : tst_QDBusXmlParser::signals_(one-out)
  PASS   : tst_QDBusXmlParser::signals_(one-out-no-direction)
  PASS   : tst_QDBusXmlParser::signals_(two-out-with-name)
  FAIL!  : tst_QDBusXmlParser::signals_(complex) Compared values are not the same
     Actual   (clean_xml(iface.introspection)): <interface name="iface.iface1">
   <signal name="Signal1">
    <arg type="as" direction="out"/>
   </signal>
   <signal name="Signal2">
    <arg type="s" direction="out" name="key"/>
    <arg type="v" direction="out" name="value"/>
    <annotation name="foo.equivalent" value="QVariantMap"/>
   </signal>
  </interface>
  
     Expected (clean_xml(intHeader + xmlDataFragment + intFooter)): <interface name="iface.iface1">
   <signal name="Signal1">
    <arg type="as" direction="out"/>
   </signal>
   <signal name="Signal2">
    <arg type="s" name="key" direction="out"/>
    <arg type="v" name="value" direction="out"/>
    <annotation name="foo.equivalent" value="QVariantMap"/>
   </signal>
  </interface>
  
     Loc: [tst_qdbusxmlparser.cpp(472)]
  PASS   : tst_QDBusXmlParser::properties(no-signals)
  PASS   : tst_QDBusXmlParser::properties(one-readable)
  PASS   : tst_QDBusXmlParser::properties(one-writable)
  PASS   : tst_QDBusXmlParser::properties(one-read-writable)
  PASS   : tst_QDBusXmlParser::properties(two-1)
  PASS   : tst_QDBusXmlParser::properties(two-2)
  PASS   : tst_QDBusXmlParser::properties(complex)
  PASS   : tst_QDBusXmlParser::properties(complex2)
  PASS   : tst_QDBusXmlParser::cleanupTestCase()
  Totals: 53 passed, 5 failed, 0 skipped
  ********* Finished testing of tst_QDBusXmlParser *********
  QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
  QtQA::App::TestRunner:   first attempt:  exited with exit code 7
  QtQA::App::TestRunner:   second attempt: exited with exit code 5
  QtQA::App::TestRunner: the test seems to be flaky, please fix this
  QtQA::App::TestRunner: this flaky test is being treated as a FAIL
  QtQA::App::TestRunner: end tst_qdbusxmlparser: 0.046192 seconds, exit code 5

  Build log: http://testresults.qt-project.org/ci/Qt5_release_Integration/build_00002/linux-g++-32_Ubuntu_10.04_x86/log.txt.gz

  Tested changes (refs/builds/release_1355736653):
    http://codereview.qt-project.org/42893 [PS1] - Updated submodules.



More information about the Ci-reports mailing list