[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtdeclarative#dev
Qt Continuous Integration System
ci-noreply at qt-project.org
Fri Dec 21 12:19:27 CET 2012
Autotests `tst_qpauseanimationjob', `tst_qquickanimatedsprite', and `tst_qquickpathview' failed :(
Some (not all) of the tests were determined to be flaky, meaning results were not consistent across multiple runs. This might make the problem difficult to reproduce. Also, flaky failures might or might not be related to any recent changes in the source code.
Testing tst_QQuickPathView
FAIL! : tst_QQuickPathView::maximumFlickVelocity() '!pathview->isMoving()' returned FALSE. ()
Loc: [tst_qquickpathview.cpp(1801)]
Totals: 121 passed, 1 failed, 1 skipped
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickPathView *********
Config: Using QTest library 5.0.0, Qt 5.0.0
PASS : tst_QQuickPathView::initTestCase()
PASS : tst_QQuickPathView::initValues()
PASS : tst_QQuickPathView::items()
PASS : tst_QQuickPathView::dataModel()
PASS : tst_QQuickPathView::pathview2()
PASS : tst_QQuickPathView::pathview3()
PASS : tst_QQuickPathView::initialCurrentIndex()
PASS : tst_QQuickPathView::insertModel(insert after current)
PASS : tst_QQuickPathView::insertModel(insert before current)
PASS : tst_QQuickPathView::insertModel(insert multiple after current)
PASS : tst_QQuickPathView::insertModel(insert multiple before current)
PASS : tst_QQuickPathView::insertModel(insert at end)
PASS : tst_QQuickPathView::insertModel(insert at beginning)
PASS : tst_QQuickPathView::insertModel(insert at current)
PASS : tst_QQuickPathView::insertModel(no range - insert after current)
PASS : tst_QQuickPathView::insertModel(no range - insert before current)
PASS : tst_QQuickPathView::insertModel(no range - insert multiple after current)
PASS : tst_QQuickPathView::insertModel(no range - insert multiple before current)
PASS : tst_QQuickPathView::insertModel(no range - insert at end)
PASS : tst_QQuickPathView::insertModel(no range - insert at beginning)
PASS : tst_QQuickPathView::insertModel(no range - insert at current)
PASS : tst_QQuickPathView::removeModel(remove after current)
PASS : tst_QQuickPathView::removeModel(remove before current)
PASS : tst_QQuickPathView::removeModel(remove multiple after current)
PASS : tst_QQuickPathView::removeModel(remove multiple before current)
PASS : tst_QQuickPathView::removeModel(remove last)
PASS : tst_QQuickPathView::removeModel(remove first)
PASS : tst_QQuickPathView::removeModel(remove current)
PASS : tst_QQuickPathView::removeModel(remove all)
PASS : tst_QQuickPathView::removeModel(no range - remove after current)
PASS : tst_QQuickPathView::removeModel(no range - remove before current)
PASS : tst_QQuickPathView::removeModel(no range - remove multiple after current)
PASS : tst_QQuickPathView::removeModel(no range - remove multiple before current)
PASS : tst_QQuickPathView::removeModel(no range - remove last)
PASS : tst_QQuickPathView::removeModel(no range - remove first)
PASS : tst_QQuickPathView::removeModel(no range - remove current offset)
PASS : tst_QQuickPathView::removeModel(no range - remove all)
PASS : tst_QQuickPathView::moveModel(move after current)
PASS : tst_QQuickPathView::moveModel(move before current)
PASS : tst_QQuickPathView::moveModel(move before current to after)
PASS : tst_QQuickPathView::moveModel(move multiple after current)
PASS : tst_QQuickPathView::moveModel(move multiple before current)
PASS : tst_QQuickPathView::moveModel(move before current to end)
PASS : tst_QQuickPathView::moveModel(move last to beginning)
PASS : tst_QQuickPathView::moveModel(move current)
PASS : tst_QQuickPathView::moveModel(no range - move after current)
PASS : tst_QQuickPathView::moveModel(no range - move before current)
PASS : tst_QQuickPathView::moveModel(no range - move before current to after)
PASS : tst_QQuickPathView::moveModel(no range - move multiple after current)
PASS : tst_QQuickPathView::moveModel(no range - move multiple before current)
PASS : tst_QQuickPathView::moveModel(no range - move before current to end)
PASS : tst_QQuickPathView::moveModel(no range - move last to beginning)
PASS : tst_QQuickPathView::moveModel(no range - move current)
PASS : tst_QQuickPathView::moveModel(no range - move multiple incl. current)
PASS : tst_QQuickPathView::consecutiveModelChanges(no range - insert after, insert before)
PASS : tst_QQuickPathView::consecutiveModelChanges(no range - remove after, remove before)
PASS : tst_QQuickPathView::consecutiveModelChanges(no range - remove after, insert before)
PASS : tst_QQuickPathView::consecutiveModelChanges(no range - insert after, remove before)
PASS : tst_QQuickPathView::consecutiveModelChanges(no range - insert, remove all, polish, insert)
PASS : tst_QQuickPathView::path()
PASS : tst_QQuickPathView::pathMoved()
PASS : tst_QQuickPathView::offset(0.0)
PASS : tst_QQuickPathView::offset(1.0)
PASS : tst_QQuickPathView::offset(5.0)
PASS : tst_QQuickPathView::offset(4.6)
PASS : tst_QQuickPathView::offset(4.4)
PASS : tst_QQuickPathView::offset(5.4)
PASS : tst_QQuickPathView::offset(5.6)
PASS : tst_QQuickPathView::setCurrentIndex()
PASS : tst_QQuickPathView::resetModel()
PASS : tst_QQuickPathView::propertyChanges()
PASS : tst_QQuickPathView::pathChanges()
PASS : tst_QQuickPathView::componentChanges()
PASS : tst_QQuickPathView::modelChanges()
PASS : tst_QQuickPathView::pathUpdateOnStartChanged()
SKIP : tst_QQuickPathView::package() QTBUG-27170 view does not reliably receive polish without a running animation
Loc: [tst_qquickpathview.cpp(1345)]
PASS : tst_QQuickPathView::emptyModel()
PASS : tst_QQuickPathView::closed()
PASS : tst_QQuickPathView::pathUpdate()
PASS : tst_QQuickPathView::visualDataModel()
PASS : tst_QQuickPathView::undefinedPath()
PASS : tst_QQuickPathView::mouseDrag()
PASS : tst_QQuickPathView::treeModel()
PASS : tst_QQuickPathView::changePreferredHighlight()
PASS : tst_QQuickPathView::missingPercent()
PASS : tst_QQuickPathView::creationContext()
PASS : tst_QQuickPathView::currentOffsetOnInsertion()
PASS : tst_QQuickPathView::asynchronous()
PASS : tst_QQuickPathView::cancelDrag()
FAIL! : tst_QQuickPathView::maximumFlickVelocity() '!pathview->isMoving()' returned FALSE. ()
Loc: [tst_qquickpathview.cpp(1801)]
PASS : tst_QQuickPathView::snapToItem(no enforce range)
PASS : tst_QQuickPathView::snapToItem(enforce range)
PASS : tst_QQuickPathView::snapOneItem(no enforce range)
PASS : tst_QQuickPathView::snapOneItem(enforce range)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, all items, Beginning)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, all items, Center)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, all items, End)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, Beginning)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, Center)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, End)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, init offset 4.0, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, init offset 3.0, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, Beginning)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, Center)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, End)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, init offset 1.0, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, SnapPosition)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, Beginning)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, Center)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, End)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, init offset 1.0, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, init offset 2.0, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, SnapPosition)
PASS : tst_QQuickPathView::indexAt_itemAt(Item 0 - 585, 95)
PASS : tst_QQuickPathView::indexAt_itemAt(Item 0 - 660, 165)
PASS : tst_QQuickPathView::indexAt_itemAt(No Item a - 580, 95)
PASS : tst_QQuickPathView::indexAt_itemAt(No Item b - 585, 85)
PASS : tst_QQuickPathView::indexAt_itemAt(Item 7 - 360, 200)
PASS : tst_QQuickPathView::cacheItemCount()
PASS : tst_QQuickPathView::cleanupTestCase()
Totals: 121 passed, 1 failed, 1 skipped
********* Finished testing of tst_QQuickPathView *********
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickpathview: 149 seconds, exit code 1
Testing tst_qquickanimatedsprite
FAIL! : tst_qquickanimatedsprite::test_frameChangedSignal() 'QTest::qWaitForWindowActive(window)' returned FALSE. ()
Loc: [tst_qquickanimatedsprite.cpp(97)]
Totals: 3 passed, 1 failed, 0 skipped
Number of leaked pixmaps: 1
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickanimatedsprite *********
Config: Using QTest library 5.0.0, Qt 5.0.0
PASS : tst_qquickanimatedsprite::initTestCase()
PASS : tst_qquickanimatedsprite::test_properties()
FAIL! : tst_qquickanimatedsprite::test_frameChangedSignal() 'QTest::qWaitForWindowActive(window)' returned FALSE. ()
Loc: [tst_qquickanimatedsprite.cpp(97)]
PASS : tst_qquickanimatedsprite::cleanupTestCase()
Totals: 3 passed, 1 failed, 0 skipped
********* Finished testing of tst_qquickanimatedsprite *********
Number of leaked pixmaps: 1
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickanimatedsprite: 4 seconds, exit code 1
Testing tst_QPauseAnimationJob
FAIL! : tst_QPauseAnimationJob::noTimerUpdates(2) 'animation.state() == QAbstractAnimationJob::Stopped' returned FALSE. ()
Loc: [tst_qpauseanimationjob.cpp(166)]
FAIL! : tst_QPauseAnimationJob::pauseAndPropertyAnimations() 'animation.state() == QAbstractAnimationJob::Stopped' returned FALSE. ()
Loc: [tst_qpauseanimationjob.cpp(253)]
FAIL! : tst_QPauseAnimationJob::multipleSequentialGroups() 'group.state() == QAbstractAnimationJob::Stopped' returned FALSE. ()
Loc: [tst_qpauseanimationjob.cpp(426)]
Totals: 11 passed, 3 failed, 0 skipped
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QPauseAnimationJob *********
Config: Using QTest library 5.0.0, Qt 5.0.0
PASS : tst_QPauseAnimationJob::initTestCase()
PASS : tst_QPauseAnimationJob::changeDirectionWhileRunning()
PASS : tst_QPauseAnimationJob::noTimerUpdates(0)
PASS : tst_QPauseAnimationJob::noTimerUpdates(1)
PASS : tst_QPauseAnimationJob::noTimerUpdates(2)
PASS : tst_QPauseAnimationJob::noTimerUpdates(3)
PASS : tst_QPauseAnimationJob::multiplePauseAnimations()
PASS : tst_QPauseAnimationJob::pauseAndPropertyAnimations()
PASS : tst_QPauseAnimationJob::pauseResume()
PASS : tst_QPauseAnimationJob::sequentialPauseGroup()
PASS : tst_QPauseAnimationJob::sequentialGroupWithPause()
FAIL! : tst_QPauseAnimationJob::multipleSequentialGroups() 'group.state() == QAbstractAnimationJob::Stopped' returned FALSE. ()
Loc: [tst_qpauseanimationjob.cpp(426)]
PASS : tst_QPauseAnimationJob::zeroDuration()
PASS : tst_QPauseAnimationJob::cleanupTestCase()
Totals: 13 passed, 1 failed, 0 skipped
********* Finished testing of tst_QPauseAnimationJob *********
QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
QtQA::App::TestRunner: first attempt: exited with exit code 3
QtQA::App::TestRunner: second attempt: exited with exit code 1
QtQA::App::TestRunner: the test seems to be flaky, please fix this
QtQA::App::TestRunner: this flaky test is being treated as a FAIL
QtQA::App::TestRunner: end tst_qpauseanimationjob: 20 seconds, exit code 1
Build log: http://testresults.qt-project.org/ci/QtDeclarative_dev_Integration/build_00024/macx-clang_developer-build_qtnamespace_OSX_10.7/log.txt.gz
Tested changes (refs/builds/dev_1356083314):
http://codereview.qt-project.org/43166 [PS4] - Fix: disallow incomplete hex numbers "0x" and "0X".
More information about the Ci-reports
mailing list