[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtdeclarative#stable

Mon Apr 15 14:38:01 CEST 2013

Autotest `tst_qqmldebugjs' failed :(

The test was determined to be flaky, meaning results were not consistent across multiple runs.  This might make the problem difficult to reproduce.  Also, flaky failures might or might not be related to any recent changes in the source code.

  Testing tst_QQmlDebugJS
  FAIL!  : tst_QQmlDebugJS::connect() 'init()' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1058)]
  FAIL!  : tst_QQmlDebugJS::gc() 'init()' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1125)]
  FAIL!  : tst_QQmlDebugJS::setBreakpointInScriptOnCompleted() 'init(ONCOMPLETED_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1165)]
  FAIL!  : tst_QQmlDebugJS::setBreakpointInScriptOnComponentCreated() 'init(CREATECOMPONENT_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1185)]
  FAIL!  : tst_QQmlDebugJS::setBreakpointInScriptWithCondition() 'init(CONDITION_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1309)]
  FAIL!  : tst_QQmlDebugJS::changeBreakpoint() 'init(CHANGEBREAKPOINT_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1394)]
  FAIL!  : tst_QQmlDebugJS::changeBreakpointOnCondition() 'init(CHANGEBREAKPOINT_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1439)]
  FAIL!  : tst_QQmlDebugJS::stepNext() 'init(STEPACTION_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1537)]
  FAIL!  : tst_QQmlDebugJS::stepIn() 'init(STEPACTION_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1584)]
  FAIL!  : tst_QQmlDebugJS::backtrace() 'init(ONCOMPLETED_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1656)]
  FAIL!  : tst_QQmlDebugJS::evaluateInLocalScope() 'init(ONCOMPLETED_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1720)]
  FAIL!  : tst_QQmlDebugJS::getScripts() 'init()' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1768)]
  FAIL!  : tst_QQmlDebugJS::getSource() 'init(ONCOMPLETED_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1788)]
  Totals: 22 passed, 13 failed, 0 skipped
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_QQmlDebugJS *********
  Config: Using QTest library 5.1.0, Qt 5.1.0
  PASS   : tst_QQmlDebugJS::initTestCase()
  PASS   : tst_QQmlDebugJS::connect()
  PASS   : tst_QQmlDebugJS::interrupt()
  PASS   : tst_QQmlDebugJS::getVersion()
  PASS   : tst_QQmlDebugJS::applyV8Flags()
  QWARN  : tst_QQmlDebugJS::disconnect() waitForSignal 2enabled() timed out after 10000 ms
  FAIL!  : tst_QQmlDebugJS::disconnect() 'init()' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1114)]
  QDEBUG : tst_QQmlDebugJS::disconnect()
  DEBUGGEE OUTPUT:
  "QML Debugger: Waiting for connection on port 3771...
  "
  QDEBUG : tst_QQmlDebugJS::disconnect() Process State: "running"
  QDEBUG : tst_QQmlDebugJS::disconnect() Application Output: "QML Debugger: Waiting for connection on port 3771...
  "
  QWARN  : tst_QQmlDebugJS::gc() waitForSignal 2enabled() timed out after 10000 ms
  FAIL!  : tst_QQmlDebugJS::gc() 'init()' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1125)]
  QDEBUG : tst_QQmlDebugJS::gc()
  DEBUGGEE OUTPUT:
  "QML Debugger: Waiting for connection on port 3771...
  "
  QDEBUG : tst_QQmlDebugJS::gc() Process State: "running"
  QDEBUG : tst_QQmlDebugJS::gc() Application Output: "QML Debugger: Waiting for connection on port 3771...
  "
  PASS   : tst_QQmlDebugJS::listBreakpoints()
  PASS   : tst_QQmlDebugJS::setBreakpointInScriptOnCompleted()
  QWARN  : tst_QQmlDebugJS::setBreakpointInScriptOnComponentCreated() waitForSignal 2stopped() timed out after 10000 ms
  FAIL!  : tst_QQmlDebugJS::setBreakpointInScriptOnComponentCreated() 'QQmlDebugTest::waitForSignal(client, SIGNAL(stopped()))' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1189)]
  QDEBUG : tst_QQmlDebugJS::setBreakpointInScriptOnComponentCreated()
  DEBUGGEE OUTPUT:
  "QML Debugger: Waiting for connection on port 3771...
  "
  QDEBUG : tst_QQmlDebugJS::setBreakpointInScriptOnComponentCreated() Process State: "running"
  QDEBUG : tst_QQmlDebugJS::setBreakpointInScriptOnComponentCreated() Application Output: "QML Debugger: Waiting for connection on port 3771...
  "
  PASS   : tst_QQmlDebugJS::setBreakpointInScriptOnTimerCallback()
  PASS   : tst_QQmlDebugJS::setBreakpointInScriptInDifferentFile()
  QWARN  : tst_QQmlDebugJS::setBreakpointInScriptOnComment() waitForSignal 2enabled() timed out after 10000 ms
  FAIL!  : tst_QQmlDebugJS::setBreakpointInScriptOnComment() 'init(BREAKPOINTRELOCATION_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1245)]
  QDEBUG : tst_QQmlDebugJS::setBreakpointInScriptOnComment()
  DEBUGGEE OUTPUT:
  "QML Debugger: Waiting for connection on port 3771...
  "
  QDEBUG : tst_QQmlDebugJS::setBreakpointInScriptOnComment() Process State: "running"
  QDEBUG : tst_QQmlDebugJS::setBreakpointInScriptOnComment() Application Output: "QML Debugger: Waiting for connection on port 3771...
  "
  QWARN  : tst_QQmlDebugJS::setBreakpointInScriptOnEmptyLine() waitForSignal 2enabled() timed out after 10000 ms
  FAIL!  : tst_QQmlDebugJS::setBreakpointInScriptOnEmptyLine() 'init(BREAKPOINTRELOCATION_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1267)]
  QDEBUG : tst_QQmlDebugJS::setBreakpointInScriptOnEmptyLine()
  DEBUGGEE OUTPUT:
  "QML Debugger: Waiting for connection on port 3771...
  "
  QDEBUG : tst_QQmlDebugJS::setBreakpointInScriptOnEmptyLine() Process State: "running"
  QDEBUG : tst_QQmlDebugJS::setBreakpointInScriptOnEmptyLine() Application Output: "QML Debugger: Waiting for connection on port 3771...
  "
  PASS   : tst_QQmlDebugJS::setBreakpointInScriptOnOptimizedBinding()
  PASS   : tst_QQmlDebugJS::setBreakpointInScriptWithCondition()
  QWARN  : tst_QQmlDebugJS::setBreakpointOnEvent() waitForSignal 2enabled() timed out after 10000 ms
  FAIL!  : tst_QQmlDebugJS::setBreakpointOnEvent() 'init(TIMER_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1372)]
  QDEBUG : tst_QQmlDebugJS::setBreakpointOnEvent()
  DEBUGGEE OUTPUT:
  "QML Debugger: Waiting for connection on port 3771...
  "
  QDEBUG : tst_QQmlDebugJS::setBreakpointOnEvent() Process State: "running"
  QDEBUG : tst_QQmlDebugJS::setBreakpointOnEvent() Application Output: "QML Debugger: Waiting for connection on port 3771...
  "
  PASS   : tst_QQmlDebugJS::changeBreakpoint()
  QWARN  : tst_QQmlDebugJS::changeBreakpointOnCondition() waitForSignal 2enabled() timed out after 10000 ms
  FAIL!  : tst_QQmlDebugJS::changeBreakpointOnCondition() 'init(CHANGEBREAKPOINT_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1439)]
  QDEBUG : tst_QQmlDebugJS::changeBreakpointOnCondition()
  DEBUGGEE OUTPUT:
  "QML Debugger: Waiting for connection on port 3771...
  "
  QDEBUG : tst_QQmlDebugJS::changeBreakpointOnCondition() Process State: "running"
  QDEBUG : tst_QQmlDebugJS::changeBreakpointOnCondition() Application Output: "QML Debugger: Waiting for connection on port 3771...
  "
  PASS   : tst_QQmlDebugJS::clearBreakpoint()
  PASS   : tst_QQmlDebugJS::setExceptionBreak()
  PASS   : tst_QQmlDebugJS::stepNext()
  PASS   : tst_QQmlDebugJS::stepNextWithCount()
  PASS   : tst_QQmlDebugJS::stepIn()
  PASS   : tst_QQmlDebugJS::stepOut()
  QWARN  : tst_QQmlDebugJS::continueDebugging() waitForSignal 2enabled() timed out after 10000 ms
  FAIL!  : tst_QQmlDebugJS::continueDebugging() 'init(STEPACTION_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1632)]
  QDEBUG : tst_QQmlDebugJS::continueDebugging()
  DEBUGGEE OUTPUT:
  "QML Debugger: Waiting for connection on port 3771...
  "
  QDEBUG : tst_QQmlDebugJS::continueDebugging() Process State: "running"
  QDEBUG : tst_QQmlDebugJS::continueDebugging() Application Output: "QML Debugger: Waiting for connection on port 3771...
  "
  PASS   : tst_QQmlDebugJS::backtrace()
  PASS   : tst_QQmlDebugJS::getFrameDetails()
  PASS   : tst_QQmlDebugJS::getScopeDetails()
  PASS   : tst_QQmlDebugJS::evaluateInGlobalScope()
  QWARN  : tst_QQmlDebugJS::evaluateInLocalScope() waitForSignal 2enabled() timed out after 10000 ms
  FAIL!  : tst_QQmlDebugJS::evaluateInLocalScope() 'init(ONCOMPLETED_QMLFILE)' returned FALSE. ()
     Loc: [tst_qqmldebugjs.cpp(1720)]
  QDEBUG : tst_QQmlDebugJS::evaluateInLocalScope()
  DEBUGGEE OUTPUT:
  "QML Debugger: Waiting for connection on port 3771...
  "
  QDEBUG : tst_QQmlDebugJS::evaluateInLocalScope() Process State: "running"
  QDEBUG : tst_QQmlDebugJS::evaluateInLocalScope() Application Output: "QML Debugger: Waiting for connection on port 3771...
  "
  PASS   : tst_QQmlDebugJS::getScopes()
  PASS   : tst_QQmlDebugJS::getScripts()
  PASS   : tst_QQmlDebugJS::getSource()
  PASS   : tst_QQmlDebugJS::cleanupTestCase()
  Totals: 26 passed, 9 failed, 0 skipped
  ********* Finished testing of tst_QQmlDebugJS *********
  QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
  QtQA::App::TestRunner:   first attempt:  exited with exit code 13
  QtQA::App::TestRunner:   second attempt: exited with exit code 9
  QtQA::App::TestRunner: the test seems to be flaky, please fix this
  QtQA::App::TestRunner: this flaky test is being treated as a FAIL
  QtQA::App::TestRunner: end tst_qqmldebugjs: 236 seconds, exit code 9

  Build log: http://testresults.qt-project.org/ci/QtDeclarative_stable_Integration/build_00404/macx-clang_developer-build_qtnamespace_OSX_10.7/log.txt.gz

  Tested changes (refs/builds/stable_1366026243):
    http://codereview.qt-project.org/53702 [PS1] - Remove slow and buggy sub-image code