[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtlocation#dev
Qt Continuous Integration System
ci-noreply at qt-project.org
Tue Aug 13 16:08:54 CEST 2013
Autotest `tst_qnmeapositioninfosource_realtime' failed :(
The test was determined to be flaky, meaning results were not consistent across multiple runs. This might make the problem difficult to reproduce. Also, flaky failures might or might not be related to any recent changes in the source code.
Testing tst_QNmeaPositionInfoSource_RealTime
FAIL! : tst_QNmeaPositionInfoSource_RealTime::lastKnownPosition() Compared values are not the same
Actual (proxy->source()->lastKnownPosition().timestamp()): Invalid QDateTime
Expected (dt) : 2013/08/13 14:25:40.244[UTC]
..\tst_qnmeapositioninfosource.cpp(120) : failure location
FAIL! : tst_QNmeaPositionInfoSource_RealTime::requestUpdate_after_start() Compared values are not the same
Actual (spyUpdate.count()): 0
Expected (1) : 1
..\tst_qnmeapositioninfosource.cpp(457) : failure location
Totals: 22 passed, 2 failed, 0 skipped
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QNmeaPositionInfoSource_RealTime *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QNmeaPositionInfoSource_RealTime::initTestCase()
PASS : tst_QNmeaPositionInfoSource_RealTime::constructor()
PASS : tst_QNmeaPositionInfoSource_RealTime::supportedPositioningMethods()
PASS : tst_QNmeaPositionInfoSource_RealTime::minimumUpdateInterval()
PASS : tst_QNmeaPositionInfoSource_RealTime::setUpdateInterval_delayedUpdate()
PASS : tst_QNmeaPositionInfoSource_RealTime::lastKnownPosition()
PASS : tst_QNmeaPositionInfoSource_RealTime::beginWithBufferedData(startUpdates(), 1 update in buffer)
PASS : tst_QNmeaPositionInfoSource_RealTime::beginWithBufferedData(requestUpdate(), 1 update in buffer)
PASS : tst_QNmeaPositionInfoSource_RealTime::beginWithBufferedData(startUpdates(), multiple updates in buffer)
PASS : tst_QNmeaPositionInfoSource_RealTime::beginWithBufferedData(requestUpdate(), multiple updates in buffer)
QWARN : tst_QNmeaPositionInfoSource_RealTime::startUpdates(1 update) QNmeaPositionInfoSource: no QIODevice data source, call setDevice() first
FAIL! : tst_QNmeaPositionInfoSource_RealTime::startUpdates(1 update) Compared values are not the same
Actual (spyUpdate.count()): 0
Expected (dateTimes.count()): 1
..\tst_qnmeapositioninfosource.cpp(206) : failure location
PASS : tst_QNmeaPositionInfoSource_RealTime::startUpdates(2 updates)
PASS : tst_QNmeaPositionInfoSource_RealTime::startUpdates(10 updates)
PASS : tst_QNmeaPositionInfoSource_RealTime::startUpdates_withTimeout()
PASS : tst_QNmeaPositionInfoSource_RealTime::startUpdates_expectLatestUpdateOnly()
PASS : tst_QNmeaPositionInfoSource_RealTime::startUpdates_waitForValidDateTime(Feed GGA,RMC,GGA; expect RMC, second GGA only)
PASS : tst_QNmeaPositionInfoSource_RealTime::startUpdates_waitForValidDateTime(Feed GGA,ZDA,GGA; expect second GGA only)
PASS : tst_QNmeaPositionInfoSource_RealTime::requestUpdate_waitForValidDateTime(Feed GGA,RMC,GGA; expect RMC, second GGA only)
PASS : tst_QNmeaPositionInfoSource_RealTime::requestUpdate_waitForValidDateTime(Feed GGA,ZDA,GGA; expect second GGA only)
PASS : tst_QNmeaPositionInfoSource_RealTime::requestUpdate()
PASS : tst_QNmeaPositionInfoSource_RealTime::requestUpdate_after_start()
PASS : tst_QNmeaPositionInfoSource_RealTime::testWithBadNmea(requestUpdate(), bad second sentence)
PASS : tst_QNmeaPositionInfoSource_RealTime::testWithBadNmea(startUpdates(), bad second sentence)
PASS : tst_QNmeaPositionInfoSource_RealTime::cleanupTestCase()
Totals: 23 passed, 1 failed, 0 skipped
********* Finished testing of tst_QNmeaPositionInfoSource_RealTime *********
QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
QtQA::App::TestRunner: first attempt: exited with exit code 2
QtQA::App::TestRunner: second attempt: exited with exit code 1
QtQA::App::TestRunner: the test seems to be flaky, please fix this
QtQA::App::TestRunner: this flaky test is being treated as a FAIL
QtQA::App::TestRunner: end tst_qnmeapositioninfosource_realtime: 50 seconds, exit code 1
Build log: http://testresults.qt-project.org/ci/QtLocation_dev_Integration/build_00028/win32-msvc2010_Windows_7/log.txt.gz
Tested changes (refs/builds/dev_1376399805):
http://codereview.qt-project.org/62369 [PS6] - QGeoAreaMonitor becomes loadable via plugins.
More information about the Ci-reports
mailing list