[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtbase#dev
Qt Continuous Integration System
ci-noreply at qt-project.org
Thu Aug 29 13:35:04 CEST 2013
Autotest `tst_qfilesystemwatcher' failed :(
The test was determined to be flaky, meaning results were not consistent across multiple runs. This might make the problem difficult to reproduce. Also, flaky failures might or might not be related to any recent changes in the source code.
Testing tst_QFileSystemWatcher
FAIL! : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-testfile) Compared values are not the same
Actual (dirChangedSpy.count()): 0
Expected (1) : 1
tst_qfilesystemwatcher.cpp(487) : failure location
FAIL! : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-specialchars) Compared values are not the same
Actual (dirChangedSpy.count()): 0
Expected (1) : 1
tst_qfilesystemwatcher.cpp(487) : failure location
Totals: 19 passed, 2 failed, 0 skipped
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QFileSystemWatcher *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QFileSystemWatcher::initTestCase()
QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
PASS : tst_QFileSystemWatcher::basicTest(native backend-testfile)
QDEBUG : tst_QFileSystemWatcher::basicTest(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
QDEBUG : tst_QFileSystemWatcher::basicTest(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
QDEBUG : tst_QFileSystemWatcher::basicTest(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
QDEBUG : tst_QFileSystemWatcher::basicTest(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
PASS : tst_QFileSystemWatcher::basicTest(poller backend-testfile)
QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
PASS : tst_QFileSystemWatcher::basicTest(native backend-specialchars)
QDEBUG : tst_QFileSystemWatcher::watchDirectory(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
QDEBUG : tst_QFileSystemWatcher::watchDirectory(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
QSYSTEM: tst_QFileSystemWatcher::watchDirectory(native backend-testfile) QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\AppData\Local\Temp\tst_qfilesystemwatcherA3gaaa\testDir" (Access is denied.)
PASS : tst_QFileSystemWatcher::watchDirectory(native backend-testfile)
QDEBUG : tst_QFileSystemWatcher::watchDirectory(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
QDEBUG : tst_QFileSystemWatcher::watchDirectory(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
PASS : tst_QFileSystemWatcher::watchDirectory(poller backend-testfile)
QDEBUG : tst_QFileSystemWatcher::watchDirectory(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
QDEBUG : tst_QFileSystemWatcher::watchDirectory(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
QSYSTEM: tst_QFileSystemWatcher::watchDirectory(native backend-specialchars) QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\AppData\Local\Temp\tst_qfilesystemwatcherMfeaaa\testDir" (Access is denied.)
PASS : tst_QFileSystemWatcher::watchDirectory(native backend-specialchars)
PASS : tst_QFileSystemWatcher::addPath()
PASS : tst_QFileSystemWatcher::removePath()
PASS : tst_QFileSystemWatcher::addPaths()
PASS : tst_QFileSystemWatcher::removePaths()
QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
XFAIL : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-testfile) See QTBUG-30943
tst_qfilesystemwatcher.cpp(476) : failure location
FAIL! : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-testfile) Compared values are not the same
Actual (dirChangedSpy.count()): 0
Expected (1) : 1
tst_qfilesystemwatcher.cpp(487) : failure location
QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
PASS : tst_QFileSystemWatcher::watchFileAndItsDirectory(poller backend-testfile)
QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
PASS : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-specialchars)
QWARN : tst_QFileSystemWatcher::nonExistingFile() QFileSystemWatcher::addPaths: list is empty
QWARN : tst_QFileSystemWatcher::nonExistingFile() QFileSystemWatcher::removePaths: list is empty
PASS : tst_QFileSystemWatcher::nonExistingFile()
PASS : tst_QFileSystemWatcher::removeFileAndUnWatch()
PASS : tst_QFileSystemWatcher::destroyAfterQCoreApplication()
QDEBUG : tst_QFileSystemWatcher::QTBUG2331(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
QSYSTEM: tst_QFileSystemWatcher::QTBUG2331(native backend-testfile) QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\AppData\Local\Temp\tst_qfilesystemwatcherbEbaaa" (Access is denied.)
PASS : tst_QFileSystemWatcher::QTBUG2331(native backend-testfile)
QDEBUG : tst_QFileSystemWatcher::QTBUG2331(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
PASS : tst_QFileSystemWatcher::QTBUG2331(poller backend-testfile)
QDEBUG : tst_QFileSystemWatcher::QTBUG2331(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
QSYSTEM: tst_QFileSystemWatcher::QTBUG2331(native backend-specialchars) QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\AppData\Local\Temp\tst_qfilesystemwatcherFdgaaa" (Access is denied.)
PASS : tst_QFileSystemWatcher::QTBUG2331(native backend-specialchars)
PASS : tst_QFileSystemWatcher::cleanupTestCase()
Totals: 20 passed, 1 failed, 0 skipped
********* Finished testing of tst_QFileSystemWatcher *********
QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
QtQA::App::TestRunner: first attempt: exited with exit code 2
QtQA::App::TestRunner: second attempt: exited with exit code 1
QtQA::App::TestRunner: the test seems to be flaky, please fix this
QtQA::App::TestRunner: this flaky test is being treated as a FAIL
QtQA::App::TestRunner: end tst_qfilesystemwatcher: 258 seconds, exit code 1
Build log: http://testresults.qt-project.org/ci/QtBase_dev_Integration/build_01604/win64-msvc2012_developer-build_qtnamespace_Windows_8/log.txt.gz
Tested changes (refs/builds/dev_1377770499):
http://codereview.qt-project.org/64030 [PS1] - QDoc: Fix (!a == b) bug
More information about the Ci-reports
mailing list