[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtdeclarative#stable
Qt Continuous Integration System
ci-noreply at qt-project.org
Tue Dec 10 12:14:45 CET 2013
eighteen autotests failed :(
Testing tst_qquickwindow
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickwindow *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquickwindow::initTestCase()
PASS : tst_qquickwindow::constantUpdates()
PASS : tst_qquickwindow::constantUpdatesOnWindow(unblocked, beforeRender)
PASS : tst_qquickwindow::constantUpdatesOnWindow(unblocked, afterRender)
PASS : tst_qquickwindow::constantUpdatesOnWindow(unblocked, swapped)
PASS : tst_qquickwindow::mouseFiltering()
PASS : tst_qquickwindow::headless()
SKIP : tst_qquickwindow::noUpdateWhenNothingChanges() Only threaded renderloop implements this feature
tst_qquickwindow.cpp(1123) : failure location
PASS : tst_qquickwindow::touchEvent_basic()
PASS : tst_qquickwindow::touchEvent_propagation(disable events)
PASS : tst_qquickwindow::touchEvent_propagation(disable item)
PASS : tst_qquickwindow::touchEvent_propagation(hide item)
PASS : tst_qquickwindow::touchEvent_cancel()
PASS : tst_qquickwindow::touchEvent_reentrant()
PASS : tst_qquickwindow::touchEvent_velocity()
PASS : tst_qquickwindow::mouseFromTouch_basic()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickwindow: 7 seconds, exit code 3221225477
Testing tst_qquickvisualdatamodel
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickvisualdatamodel *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquickvisualdatamodel::initTestCase()
PASS : tst_qquickvisualdatamodel::rootIndex()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickvisualdatamodel: 0.845627 seconds, exit code 3221225477
Testing tst_qquicktext
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquicktext *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquicktext::initTestCase()
PASS : tst_qquicktext::text()
PASS : tst_qquicktext::width()
PASS : tst_qquicktext::wrap()
PASS : tst_qquicktext::elide()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquicktext: 1 seconds, exit code 3221225477
Testing tst_QQuickPathView
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickPathView *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_QQuickPathView::initTestCase()
PASS : tst_QQuickPathView::initValues()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickpathview: 1 seconds, exit code 3221225477
Testing tst_QQuickMouseArea
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickMouseArea *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_QQuickMouseArea::initTestCase()
PASS : tst_QQuickMouseArea::dragProperties()
PASS : tst_QQuickMouseArea::resetDrag()
PASS : tst_QQuickMouseArea::dragging(left)
PASS : tst_QQuickMouseArea::dragging(right)
PASS : tst_QQuickMouseArea::dragging(middle)
PASS : tst_QQuickMouseArea::dragging(left (left|right))
PASS : tst_QQuickMouseArea::dragging(right (right|middle))
PASS : tst_QQuickMouseArea::dragging(middle (left|middle))
PASS : tst_QQuickMouseArea::dragThreshold()
PASS : tst_QQuickMouseArea::invalidDrag(middle (left|right))
PASS : tst_QQuickMouseArea::invalidDrag(left (right|middle))
PASS : tst_QQuickMouseArea::invalidDrag(right (left|middle))
PASS : tst_QQuickMouseArea::cancelDragging()
PASS : tst_QQuickMouseArea::setDragOnPressed()
PASS : tst_QQuickMouseArea::updateMouseAreaPosOnClick()
PASS : tst_QQuickMouseArea::updateMouseAreaPosOnResize()
PASS : tst_QQuickMouseArea::noOnClickedWithPressAndHold()
PASS : tst_QQuickMouseArea::onMousePressRejected()
PASS : tst_QQuickMouseArea::pressedCanceledOnWindowDeactivate()
PASS : tst_QQuickMouseArea::doubleClick(left)
PASS : tst_QQuickMouseArea::doubleClick(right)
PASS : tst_QQuickMouseArea::doubleClick(middle)
PASS : tst_QQuickMouseArea::doubleClick(left (left|right))
PASS : tst_QQuickMouseArea::doubleClick(right (right|middle))
PASS : tst_QQuickMouseArea::doubleClick(middle (left|middle))
PASS : tst_QQuickMouseArea::clickTwice(left)
PASS : tst_QQuickMouseArea::clickTwice(right)
PASS : tst_QQuickMouseArea::clickTwice(middle)
PASS : tst_QQuickMouseArea::clickTwice(left (left|right))
PASS : tst_QQuickMouseArea::clickTwice(right (right|middle))
PASS : tst_QQuickMouseArea::clickTwice(middle (left|middle))
PASS : tst_QQuickMouseArea::invalidClick(middle (left|right))
PASS : tst_QQuickMouseArea::invalidClick(left (right|middle))
PASS : tst_QQuickMouseArea::invalidClick(right (left|middle))
PASS : tst_QQuickMouseArea::pressedOrdering()
PASS : tst_QQuickMouseArea::preventStealing()
SKIP : tst_QQuickMouseArea::clickThrough() QTBUG-23976 Unstable
tst_qquickmousearea.cpp(936) : failure location
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickmousearea: 15 seconds, exit code 3221225477
Testing tst_QQuickListView
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickListView *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_QQuickListView::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquicklistview: 0.887684 seconds, exit code 3221225477
Testing tst_qquickitem
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickitem *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquickitem::initTestCase()
PASS : tst_qquickitem::noWindow()
PASS : tst_qquickitem::simpleFocus()
PASS : tst_qquickitem::scopedFocus()
PASS : tst_qquickitem::addedToWindow()
PASS : tst_qquickitem::changeParent()
PASS : tst_qquickitem::multipleFocusClears()
PASS : tst_qquickitem::focusSubItemInNonFocusScope()
PASS : tst_qquickitem::parentItemWithFocus()
PASS : tst_qquickitem::reparentFocusedItem()
PASS : tst_qquickitem::constructor()
PASS : tst_qquickitem::setParentItem()
PASS : tst_qquickitem::visible()
PASS : tst_qquickitem::enabled()
PASS : tst_qquickitem::enabledFocus()
SKIP : tst_qquickitem::mouseGrab() Fails in the CI for ANGLE builds on Windows, QTBUG-32664
tst_qquickitem.cpp(1189) : failure location
PASS : tst_qquickitem::touchEventAcceptIgnore(with touch)
PASS : tst_qquickitem::touchEventAcceptIgnore(without touch)
PASS : tst_qquickitem::polishOutsideAnimation()
PASS : tst_qquickitem::polishOnCompleted()
PASS : tst_qquickitem::wheelEvent(visible and enabled)
PASS : tst_qquickitem::wheelEvent(visible and disabled)
PASS : tst_qquickitem::wheelEvent(invisible and enabled)
PASS : tst_qquickitem::wheelEvent(invisible and disabled)
PASS : tst_qquickitem::hoverEvent(visible, enabled, accept hover)
PASS : tst_qquickitem::hoverEvent(visible, disabled, accept hover)
PASS : tst_qquickitem::hoverEvent(invisible, enabled, accept hover)
PASS : tst_qquickitem::hoverEvent(invisible, disabled, accept hover)
PASS : tst_qquickitem::hoverEvent(visible, enabled, not accept hover)
PASS : tst_qquickitem::hoverEvent(visible, disabled, not accept hover)
PASS : tst_qquickitem::hoverEvent(invisible, enabled, not accept hover)
PASS : tst_qquickitem::hoverEvent(invisible, disabled, not accept hover)
PASS : tst_qquickitem::hoverEventInParent()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickitem: 3 seconds, exit code 3221225477
Testing tst_qquickimage
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickimage *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquickimage::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickimage: 0.828687 seconds, exit code 3221225477
Testing tst_qquickborderimage
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickborderimage *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquickborderimage::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickborderimage: 1 seconds, exit code 3221225477
Testing tst_qquickanimatedimage
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickanimatedimage *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquickanimatedimage::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickanimatedimage: 0.892829 seconds, exit code 3221225477
Testing tst_QQuickView
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickView *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_QQuickView::initTestCase()
PASS : tst_QQuickView::resizemodeitem()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickview: 1 seconds, exit code 3221225477
Testing tst_QQuickRepeater
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickRepeater *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_QQuickRepeater::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickrepeater: 0.870859 seconds, exit code 3221225477
Testing tst_qquickanimations
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickanimations *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquickanimations::initTestCase()
PASS : tst_qquickanimations::simpleProperty()
PASS : tst_qquickanimations::simpleNumber()
PASS : tst_qquickanimations::simpleColor()
PASS : tst_qquickanimations::simpleRotation()
PASS : tst_qquickanimations::simplePath()
PASS : tst_qquickanimations::simpleAnchor()
PASS : tst_qquickanimations::reparent()
PASS : tst_qquickanimations::pathInterpolator()
PASS : tst_qquickanimations::pathInterpolatorBackwardJump()
PASS : tst_qquickanimations::pathWithNoStart()
PASS : tst_qquickanimations::alwaysRunToEnd()
PASS : tst_qquickanimations::complete()
PASS : tst_qquickanimations::resume()
PASS : tst_qquickanimations::dotProperty()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickanimations: 13 seconds, exit code 3221225477
Testing tst_qquickdynamicpropertyanimation
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickdynamicpropertyanimation *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquickdynamicpropertyanimation::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickdynamicpropertyanimation: 1 seconds, exit code 3221225477
Testing tst_QQuickDropArea
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickDropArea *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_QQuickDropArea::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickdroparea: 0.840597 seconds, exit code 3221225477
Testing tst_QQuickDrag
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickDrag *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_QQuickDrag::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickdrag: 0.880586 seconds, exit code 3221225477
Testing tst_qquickapplication
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickapplication *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquickapplication::initTestCase()
PASS : tst_qquickapplication::active()
PASS : tst_qquickapplication::state()
XFAIL : tst_qquickapplication::layoutDirection() QTBUG-21573
tst_qquickapplication.cpp(188) : failure location
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickapplication: 1 seconds, exit code 3221225477
Testing tst_qquickanchors
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickanchors *********
Config: Using QtTest library 5.2.1, Qt 5.2.1
PASS : tst_qquickanchors::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickanchors: 0.898301 seconds, exit code 3221225477
Build log: http://testresults.qt-project.org/ci/QtDeclarative_stable_Integration/build_01470/win64-msvc2012_developer-build_qtnamespace_Windows_8/log.txt.gz
Tested changes (refs/builds/stable_1386671428):
http://codereview.qt-project.org/71518 [PS2] - Safeguard QQuickWindow::hide() against other GL contexts.
More information about the Ci-reports
mailing list