[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtdeclarative#dev

[Qt Continuous Integration System]

Autotests `tst_dialogs', `tst_qpauseanimationjob', and `tst_qv8profilerservice' failed :(

Some (not all) of the tests were determined to be flaky, meaning results were not consistent across multiple runs.  This might make the problem difficult to reproduce.  Also, flaky failures might or might not be related to any recent changes in the source code.

  Testing tst_QV8ProfilerService
  FAIL!  : tst_QV8ProfilerService::blockingConnectWithTraceEnabled() Compared values are not the same
     Loc: [tst_qv8profilerservice.cpp(252)]
  Totals: 7 passed, 1 failed, 0 skipped
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_QV8ProfilerService *********
  Config: Using QTest library 5.1.0, Qt 5.1.0
  PASS   : tst_QV8ProfilerService::initTestCase()
  PASS   : tst_QV8ProfilerService::blockingConnectWithTraceEnabled()
  QWARN  : tst_QV8ProfilerService::blockingConnectWithTraceDisabled() waitForSignal 2complete() timed out after 1000 ms
  PASS   : tst_QV8ProfilerService::blockingConnectWithTraceDisabled()
  PASS   : tst_QV8ProfilerService::nonBlockingConnect()
  PASS   : tst_QV8ProfilerService::snapshot()
  PASS   : tst_QV8ProfilerService::profileOnExit()
  FAIL!  : tst_QV8ProfilerService::console() Compared values are not the same
     Loc: [tst_qv8profilerservice.cpp(323)]
  QDEBUG : tst_QV8ProfilerService::console() Process State: "running"
  QDEBUG : tst_QV8ProfilerService::console() Application Output: "QML Debugger: Waiting for connection on port 13774...
  "
  PASS   : tst_QV8ProfilerService::cleanupTestCase()
  Totals: 7 passed, 1 failed, 0 skipped
  ********* Finished testing of tst_QV8ProfilerService *********
  QtQA::App::TestRunner: test failure could be reproduced twice consecutively
  QtQA::App::TestRunner: end tst_qv8profilerservice: 20 seconds, exit code 1
  
  Testing tst_QPauseAnimationJob
  FAIL!  : tst_QPauseAnimationJob::pauseAndPropertyAnimations() 'animation.state() == QAbstractAnimationJob::Stopped' returned FALSE. ()
     Loc: [tst_qpauseanimationjob.cpp(253)]
  FAIL!  : tst_QPauseAnimationJob::multipleSequentialGroups() 'group.state() == QAbstractAnimationJob::Stopped' returned FALSE. ()
     Loc: [tst_qpauseanimationjob.cpp(426)]
  Totals: 12 passed, 2 failed, 0 skipped
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_QPauseAnimationJob *********
  Config: Using QTest library 5.1.0, Qt 5.1.0
  PASS   : tst_QPauseAnimationJob::initTestCase()
  PASS   : tst_QPauseAnimationJob::changeDirectionWhileRunning()
  PASS   : tst_QPauseAnimationJob::noTimerUpdates(0)
  PASS   : tst_QPauseAnimationJob::noTimerUpdates(1)
  PASS   : tst_QPauseAnimationJob::noTimerUpdates(2)
  PASS   : tst_QPauseAnimationJob::noTimerUpdates(3)
  PASS   : tst_QPauseAnimationJob::multiplePauseAnimations()
  PASS   : tst_QPauseAnimationJob::pauseAndPropertyAnimations()
  PASS   : tst_QPauseAnimationJob::pauseResume()
  PASS   : tst_QPauseAnimationJob::sequentialPauseGroup()
  PASS   : tst_QPauseAnimationJob::sequentialGroupWithPause()
  FAIL!  : tst_QPauseAnimationJob::multipleSequentialGroups() 'group.state() == QAbstractAnimationJob::Stopped' returned FALSE. ()
     Loc: [tst_qpauseanimationjob.cpp(426)]
  PASS   : tst_QPauseAnimationJob::zeroDuration()
  PASS   : tst_QPauseAnimationJob::cleanupTestCase()
  Totals: 13 passed, 1 failed, 0 skipped
  ********* Finished testing of tst_QPauseAnimationJob *********
  QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
  QtQA::App::TestRunner:   first attempt:  exited with exit code 2
  QtQA::App::TestRunner:   second attempt: exited with exit code 1
  QtQA::App::TestRunner: the test seems to be flaky, please fix this
  QtQA::App::TestRunner: this flaky test is being treated as a FAIL
  QtQA::App::TestRunner: end tst_qpauseanimationjob: 21 seconds, exit code 1
  
  Testing tst_dialogs
  FAIL!  : tst_dialogs::fileDialogDefaultModality() 'spyVisibilityChanged.count() > 0' returned FALSE. ()
     Loc: [tst_dialogs.cpp(81)]
  Totals: 4 passed, 1 failed, 0 skipped
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_dialogs *********
  Config: Using QTest library 5.1.0, Qt 5.1.0
  PASS   : tst_dialogs::initTestCase()
  QWARN  : tst_dialogs::fileDialogDefaultModality() Module 'QtQuick.Dialogs' does not contain a module identifier directive - it cannot be protected from external registrations.
  QWARN  : tst_dialogs::fileDialogDefaultModality() QFileInfo::absolutePath: Constructed with empty filename
  FAIL!  : tst_dialogs::fileDialogDefaultModality() Compared values are not the same
     Actual   (spyVisibilityChanged.count()): 2
     Expected (visibilityChangedCount): 1
     Loc: [tst_dialogs.cpp(86)]
  QWARN  : tst_dialogs::fileDialogNonModal() QFileInfo::absolutePath: Constructed with empty filename
  PASS   : tst_dialogs::fileDialogNonModal()
  PASS   : tst_dialogs::fileDialogNameFilters()
  PASS   : tst_dialogs::cleanupTestCase()
  Totals: 4 passed, 1 failed, 0 skipped
  ********* Finished testing of tst_dialogs *********
  QtQA::App::TestRunner: test failure could be reproduced twice consecutively
  QtQA::App::TestRunner: end tst_dialogs: 41 seconds, exit code 1

  Build log: http://testresults.qt-project.org/ci/QtDeclarative_dev_Integration/build_00184/macx-clang_developer-build_qtnamespace_OSX_10.7/log.txt.gz

  Tested changes (refs/builds/dev_1361815413):
    http://codereview.qt-project.org/44201 [PS51] - adding QtQuick.Dialogs, with FileDialog implementation