[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtdeclarative#dev

[Qt Continuous Integration System]

Autotest `tst_qquickpathview' failed :(

The test was determined to be flaky, meaning results were not consistent across multiple runs.  This might make the problem difficult to reproduce.  Also, flaky failures might or might not be related to any recent changes in the source code.

  Testing tst_QQuickPathView
  FAIL!  : tst_QQuickPathView::maximumFlickVelocity() '!pathview->isMoving()' returned FALSE. ()
     Loc: [tst_qquickpathview.cpp(1801)]
  Totals: 121 passed, 1 failed, 1 skipped
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_QQuickPathView *********
  Config: Using QTest library 5.0.0, Qt 5.0.0
  PASS   : tst_QQuickPathView::initTestCase()
  PASS   : tst_QQuickPathView::initValues()
  PASS   : tst_QQuickPathView::items()
  PASS   : tst_QQuickPathView::dataModel()
  PASS   : tst_QQuickPathView::pathview2()
  PASS   : tst_QQuickPathView::pathview3()
  PASS   : tst_QQuickPathView::initialCurrentIndex()
  PASS   : tst_QQuickPathView::insertModel(insert after current)
  PASS   : tst_QQuickPathView::insertModel(insert before current)
  PASS   : tst_QQuickPathView::insertModel(insert multiple after current)
  PASS   : tst_QQuickPathView::insertModel(insert multiple before current)
  PASS   : tst_QQuickPathView::insertModel(insert at end)
  PASS   : tst_QQuickPathView::insertModel(insert at beginning)
  PASS   : tst_QQuickPathView::insertModel(insert at current)
  PASS   : tst_QQuickPathView::insertModel(no range - insert after current)
  PASS   : tst_QQuickPathView::insertModel(no range - insert before current)
  PASS   : tst_QQuickPathView::insertModel(no range - insert multiple after current)
  PASS   : tst_QQuickPathView::insertModel(no range - insert multiple before current)
  PASS   : tst_QQuickPathView::insertModel(no range - insert at end)
  PASS   : tst_QQuickPathView::insertModel(no range - insert at beginning)
  PASS   : tst_QQuickPathView::insertModel(no range - insert at current)
  PASS   : tst_QQuickPathView::removeModel(remove after current)
  PASS   : tst_QQuickPathView::removeModel(remove before current)
  PASS   : tst_QQuickPathView::removeModel(remove multiple after current)
  PASS   : tst_QQuickPathView::removeModel(remove multiple before current)
  PASS   : tst_QQuickPathView::removeModel(remove last)
  PASS   : tst_QQuickPathView::removeModel(remove first)
  PASS   : tst_QQuickPathView::removeModel(remove current)
  PASS   : tst_QQuickPathView::removeModel(remove all)
  PASS   : tst_QQuickPathView::removeModel(no range - remove after current)
  PASS   : tst_QQuickPathView::removeModel(no range - remove before current)
  PASS   : tst_QQuickPathView::removeModel(no range - remove multiple after current)
  PASS   : tst_QQuickPathView::removeModel(no range - remove multiple before current)
  PASS   : tst_QQuickPathView::removeModel(no range - remove last)
  PASS   : tst_QQuickPathView::removeModel(no range - remove first)
  PASS   : tst_QQuickPathView::removeModel(no range - remove current offset)
  PASS   : tst_QQuickPathView::removeModel(no range - remove all)
  PASS   : tst_QQuickPathView::moveModel(move after current)
  PASS   : tst_QQuickPathView::moveModel(move before current)
  PASS   : tst_QQuickPathView::moveModel(move before current to after)
  PASS   : tst_QQuickPathView::moveModel(move multiple after current)
  PASS   : tst_QQuickPathView::moveModel(move multiple before current)
  PASS   : tst_QQuickPathView::moveModel(move before current to end)
  PASS   : tst_QQuickPathView::moveModel(move last to beginning)
  PASS   : tst_QQuickPathView::moveModel(move current)
  PASS   : tst_QQuickPathView::moveModel(no range - move after current)
  PASS   : tst_QQuickPathView::moveModel(no range - move before current)
  PASS   : tst_QQuickPathView::moveModel(no range - move before current to after)
  PASS   : tst_QQuickPathView::moveModel(no range - move multiple after current)
  PASS   : tst_QQuickPathView::moveModel(no range - move multiple before current)
  PASS   : tst_QQuickPathView::moveModel(no range - move before current to end)
  PASS   : tst_QQuickPathView::moveModel(no range - move last to beginning)
  PASS   : tst_QQuickPathView::moveModel(no range - move current)
  PASS   : tst_QQuickPathView::moveModel(no range - move multiple incl. current)
  PASS   : tst_QQuickPathView::consecutiveModelChanges(no range - insert after, insert before)
  PASS   : tst_QQuickPathView::consecutiveModelChanges(no range - remove after, remove before)
  PASS   : tst_QQuickPathView::consecutiveModelChanges(no range - remove after, insert before)
  PASS   : tst_QQuickPathView::consecutiveModelChanges(no range - insert after, remove before)
  PASS   : tst_QQuickPathView::consecutiveModelChanges(no range - insert, remove all, polish, insert)
  PASS   : tst_QQuickPathView::path()
  PASS   : tst_QQuickPathView::pathMoved()
  PASS   : tst_QQuickPathView::offset(0.0)
  PASS   : tst_QQuickPathView::offset(1.0)
  PASS   : tst_QQuickPathView::offset(5.0)
  PASS   : tst_QQuickPathView::offset(4.6)
  PASS   : tst_QQuickPathView::offset(4.4)
  PASS   : tst_QQuickPathView::offset(5.4)
  PASS   : tst_QQuickPathView::offset(5.6)
  PASS   : tst_QQuickPathView::setCurrentIndex()
  PASS   : tst_QQuickPathView::resetModel()
  PASS   : tst_QQuickPathView::propertyChanges()
  PASS   : tst_QQuickPathView::pathChanges()
  PASS   : tst_QQuickPathView::componentChanges()
  PASS   : tst_QQuickPathView::modelChanges()
  PASS   : tst_QQuickPathView::pathUpdateOnStartChanged()
  SKIP   : tst_QQuickPathView::package() QTBUG-27170 view does not reliably receive polish without a running animation
     Loc: [tst_qquickpathview.cpp(1345)]
  PASS   : tst_QQuickPathView::emptyModel()
  PASS   : tst_QQuickPathView::closed()
  PASS   : tst_QQuickPathView::pathUpdate()
  PASS   : tst_QQuickPathView::visualDataModel()
  PASS   : tst_QQuickPathView::undefinedPath()
  PASS   : tst_QQuickPathView::mouseDrag()
  PASS   : tst_QQuickPathView::treeModel()
  PASS   : tst_QQuickPathView::changePreferredHighlight()
  PASS   : tst_QQuickPathView::missingPercent()
  PASS   : tst_QQuickPathView::creationContext()
  PASS   : tst_QQuickPathView::currentOffsetOnInsertion()
  PASS   : tst_QQuickPathView::asynchronous()
  PASS   : tst_QQuickPathView::cancelDrag()
  FAIL!  : tst_QQuickPathView::maximumFlickVelocity() '!pathview->isMoving()' returned FALSE. ()
     Loc: [tst_qquickpathview.cpp(1801)]
  FAIL!  : tst_QQuickPathView::snapToItem(no enforce range) '!pathview->isMoving()' returned FALSE. ()
     Loc: [tst_qquickpathview.cpp(1849)]
  PASS   : tst_QQuickPathView::snapToItem(enforce range)
  PASS   : tst_QQuickPathView::snapOneItem(no enforce range)
  PASS   : tst_QQuickPathView::snapOneItem(enforce range)
  PASS   : tst_QQuickPathView::positionViewAtIndex(no range, all items, Beginning)
  PASS   : tst_QQuickPathView::positionViewAtIndex(no range, all items, Center)
  PASS   : tst_QQuickPathView::positionViewAtIndex(no range, all items, End)
  PASS   : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, Beginning)
  PASS   : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, Center)
  PASS   : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, End)
  PASS   : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, Contain)
  PASS   : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, init offset 4.0, Contain)
  PASS   : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, init offset 3.0, Contain)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, all items, Beginning)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, all items, Center)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, all items, End)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, all items, Contain)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, all items, init offset 1.0, Contain)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, all items, SnapPosition)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, Beginning)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, Center)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, End)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, Contain)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, init offset 1.0, Contain)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, init offset 2.0, Contain)
  PASS   : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, SnapPosition)
  PASS   : tst_QQuickPathView::indexAt_itemAt(Item 0 - 585, 95)
  PASS   : tst_QQuickPathView::indexAt_itemAt(Item 0 - 660, 165)
  PASS   : tst_QQuickPathView::indexAt_itemAt(No Item a - 580, 95)
  PASS   : tst_QQuickPathView::indexAt_itemAt(No Item b - 585, 85)
  PASS   : tst_QQuickPathView::indexAt_itemAt(Item 7 - 360, 200)
  PASS   : tst_QQuickPathView::cacheItemCount()
  PASS   : tst_QQuickPathView::cleanupTestCase()
  Totals: 120 passed, 2 failed, 1 skipped
  ********* Finished testing of tst_QQuickPathView *********
  QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
  QtQA::App::TestRunner:   first attempt:  exited with exit code 1
  QtQA::App::TestRunner:   second attempt: exited with exit code 2
  QtQA::App::TestRunner: the test seems to be flaky, please fix this
  QtQA::App::TestRunner: this flaky test is being treated as a FAIL
  QtQA::App::TestRunner: end tst_qquickpathview: 157 seconds, exit code 2

  Build log: http://testresults.qt-project.org/ci/QtDeclarative_dev_Integration/build_00028/macx-clang_developer-build_qtnamespace_OSX_10.7/log.txt.gz

  Tested changes (refs/builds/dev_1357235325):
    http://codereview.qt-project.org/43895 [PS1] - Add the getter/setter type to PropertyGetterSetter