[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtbase#dev

[Qt Continuous Integration System]

Autotest `tst_qfilesystemwatcher' failed :(

The test was determined to be flaky, meaning results were not consistent across multiple runs.  This might make the problem difficult to reproduce.  Also, flaky failures might or might not be related to any recent changes in the source code.

  Testing tst_QFileSystemWatcher
  FAIL!  : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-testfile) Compared values are not the same
     Actual   (fileChangedSpy.count()): 1
     Expected (0): 0
  .\tst_qfilesystemwatcher.cpp(471) : failure location
  Totals: 20 passed, 1 failed, 0 skipped
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_QFileSystemWatcher *********
  Config: Using QtTest library 5.2.0, Qt 5.2.0
  PASS   : tst_QFileSystemWatcher::initTestCase()
  QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
  QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
  QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
  QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
  PASS   : tst_QFileSystemWatcher::basicTest(native backend-testfile)
  QDEBUG : tst_QFileSystemWatcher::basicTest(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
  QDEBUG : tst_QFileSystemWatcher::basicTest(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
  QDEBUG : tst_QFileSystemWatcher::basicTest(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
  QDEBUG : tst_QFileSystemWatcher::basicTest(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
  PASS   : tst_QFileSystemWatcher::basicTest(poller backend-testfile)
  QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
  QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
  QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
  QDEBUG : tst_QFileSystemWatcher::basicTest(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
  PASS   : tst_QFileSystemWatcher::basicTest(native backend-specialchars)
  QDEBUG : tst_QFileSystemWatcher::watchDirectory(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
  QDEBUG : tst_QFileSystemWatcher::watchDirectory(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
  QSYSTEM: tst_QFileSystemWatcher::watchDirectory(native backend-testfile) QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\AppData\Local\Temp\tst_qfilesystemwatcherA3gaaa\testDir"  (Access is denied.)
  PASS   : tst_QFileSystemWatcher::watchDirectory(native backend-testfile)
  QDEBUG : tst_QFileSystemWatcher::watchDirectory(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
  QDEBUG : tst_QFileSystemWatcher::watchDirectory(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
  PASS   : tst_QFileSystemWatcher::watchDirectory(poller backend-testfile)
  QDEBUG : tst_QFileSystemWatcher::watchDirectory(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
  QDEBUG : tst_QFileSystemWatcher::watchDirectory(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
  QSYSTEM: tst_QFileSystemWatcher::watchDirectory(native backend-specialchars) QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\AppData\Local\Temp\tst_qfilesystemwatcherMfeaaa\testDir"  (Access is denied.)
  PASS   : tst_QFileSystemWatcher::watchDirectory(native backend-specialchars)
  PASS   : tst_QFileSystemWatcher::addPath()
  PASS   : tst_QFileSystemWatcher::removePath()
  PASS   : tst_QFileSystemWatcher::addPaths()
  PASS   : tst_QFileSystemWatcher::removePaths()
  QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
  QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
  FAIL!  : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-testfile) Compared values are not the same
     Actual   (fileChangedSpy.count()): 1
     Expected (0): 0
  .\tst_qfilesystemwatcher.cpp(471) : failure location
  QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
  QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
  PASS   : tst_QFileSystemWatcher::watchFileAndItsDirectory(poller backend-testfile)
  QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
  QDEBUG : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
  FAIL!  : tst_QFileSystemWatcher::watchFileAndItsDirectory(native backend-specialchars) Compared values are not the same
     Actual   (fileChangedSpy.count()): 1
     Expected (0): 0
  .\tst_qfilesystemwatcher.cpp(471) : failure location
  QWARN  : tst_QFileSystemWatcher::nonExistingFile() QFileSystemWatcher::addPaths: list is empty
  QWARN  : tst_QFileSystemWatcher::nonExistingFile() QFileSystemWatcher::removePaths: list is empty
  PASS   : tst_QFileSystemWatcher::nonExistingFile()
  SKIP   : tst_QFileSystemWatcher::removeFileAndUnWatch() Skipping remaining test due to race condition.
  .\tst_qfilesystemwatcher.cpp(539) : failure location
  PASS   : tst_QFileSystemWatcher::destroyAfterQCoreApplication()
  QDEBUG : tst_QFileSystemWatcher::QTBUG2331(native backend-testfile) QFileSystemWatcher: skipping polling engine, using only native engine
  QSYSTEM: tst_QFileSystemWatcher::QTBUG2331(native backend-testfile) QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\AppData\Local\Temp\tst_qfilesystemwatcherbEbaaa"  (Access is denied.)
  PASS   : tst_QFileSystemWatcher::QTBUG2331(native backend-testfile)
  QDEBUG : tst_QFileSystemWatcher::QTBUG2331(poller backend-testfile) QFileSystemWatcher: skipping native engine, using only polling engine
  PASS   : tst_QFileSystemWatcher::QTBUG2331(poller backend-testfile)
  QDEBUG : tst_QFileSystemWatcher::QTBUG2331(native backend-specialchars) QFileSystemWatcher: skipping polling engine, using only native engine
  QSYSTEM: tst_QFileSystemWatcher::QTBUG2331(native backend-specialchars) QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\AppData\Local\Temp\tst_qfilesystemwatcherFdgaaa"  (Access is denied.)
  PASS   : tst_QFileSystemWatcher::QTBUG2331(native backend-specialchars)
  PASS   : tst_QFileSystemWatcher::cleanupTestCase()
  Totals: 18 passed, 2 failed, 1 skipped
  ********* Finished testing of tst_QFileSystemWatcher *********
  QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
  QtQA::App::TestRunner:   first attempt:  exited with exit code 1
  QtQA::App::TestRunner:   second attempt: exited with exit code 2
  QtQA::App::TestRunner: the test seems to be flaky, please fix this
  QtQA::App::TestRunner: this flaky test is being treated as a FAIL
  QtQA::App::TestRunner: end tst_qfilesystemwatcher: 255 seconds, exit code 2

  Build log: http://testresults.qt-project.org/ci/QtBase_dev_Integration/build_01250/win64-msvc2012_developer-build_qtnamespace_Windows_8/log.txt.gz

  Tested changes (refs/builds/dev_1374136397):
    http://codereview.qt-project.org/61142 [PS2] - Move the declaration of QFileIconProviderPrivate to it's own file.