[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtdeclarative#stable
Qt Continuous Integration System
ci-noreply at qt-project.org
Fri May 10 16:07:46 CEST 2013
Autotests `tst_qquickitem' and `tst_qquickitemlayer' failed :(
Testing tst_qquickitem
FAIL! : tst_qquickitem::noRepaintWhenHidden() Compared values are not the same
Actual (spy.size()): 1
Expected (0): 0
Loc: [tst_qquickitem.cpp(1744)]
Totals: 50 passed, 1 failed, 0 skipped
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickitem *********
Config: Using QTest library 5.1.0, Qt 5.1.0
PASS : tst_qquickitem::initTestCase()
PASS : tst_qquickitem::noWindow()
PASS : tst_qquickitem::simpleFocus()
PASS : tst_qquickitem::scopedFocus()
PASS : tst_qquickitem::addedToWindow()
PASS : tst_qquickitem::changeParent()
PASS : tst_qquickitem::multipleFocusClears()
PASS : tst_qquickitem::focusSubItemInNonFocusScope()
PASS : tst_qquickitem::parentItemWithFocus()
PASS : tst_qquickitem::reparentFocusedItem()
PASS : tst_qquickitem::constructor()
PASS : tst_qquickitem::setParentItem()
PASS : tst_qquickitem::visible()
PASS : tst_qquickitem::enabled()
PASS : tst_qquickitem::enabledFocus()
WARNING: tst_qquickitem::mouseGrab() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::mouseGrab() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::mouseGrab() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::mouseGrab() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::mouseGrab() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::mouseGrab() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::mouseGrab() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::mouseGrab() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::mouseGrab() Mouse event occurs outside of target window.
PASS : tst_qquickitem::mouseGrab()
PASS : tst_qquickitem::touchEventAcceptIgnore(with touch)
PASS : tst_qquickitem::touchEventAcceptIgnore(without touch)
PASS : tst_qquickitem::polishOutsideAnimation()
PASS : tst_qquickitem::polishOnCompleted()
PASS : tst_qquickitem::wheelEvent(visible and enabled)
PASS : tst_qquickitem::wheelEvent(visible and disabled)
PASS : tst_qquickitem::wheelEvent(invisible and enabled)
PASS : tst_qquickitem::wheelEvent(invisible and disabled)
PASS : tst_qquickitem::hoverEvent(visible, enabled, accept hover)
PASS : tst_qquickitem::hoverEvent(visible, disabled, accept hover)
PASS : tst_qquickitem::hoverEvent(invisible, enabled, accept hover)
PASS : tst_qquickitem::hoverEvent(invisible, disabled, accept hover)
PASS : tst_qquickitem::hoverEvent(visible, enabled, not accept hover)
PASS : tst_qquickitem::hoverEvent(visible, disabled, not accept hover)
PASS : tst_qquickitem::hoverEvent(invisible, enabled, not accept hover)
PASS : tst_qquickitem::hoverEvent(invisible, disabled, not accept hover)
PASS : tst_qquickitem::hoverEventInParent()
PASS : tst_qquickitem::paintOrder(test 1 noop)
PASS : tst_qquickitem::paintOrder(test 1 add)
PASS : tst_qquickitem::paintOrder(test 1 remove)
PASS : tst_qquickitem::paintOrder(test 1 stack before)
PASS : tst_qquickitem::paintOrder(test 1 stack after)
PASS : tst_qquickitem::paintOrder(test 1 set z)
PASS : tst_qquickitem::paintOrder(test 2 noop)
PASS : tst_qquickitem::paintOrder(test 2 add)
PASS : tst_qquickitem::paintOrder(test 2 remove 1)
PASS : tst_qquickitem::paintOrder(test 2 remove 2)
PASS : tst_qquickitem::paintOrder(test 2 stack before 1)
PASS : tst_qquickitem::paintOrder(test 2 stack before 2)
PASS : tst_qquickitem::paintOrder(test 2 stack after 1)
PASS : tst_qquickitem::paintOrder(test 2 stack after 2)
PASS : tst_qquickitem::paintOrder(test 1 set z)
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
WARNING: tst_qquickitem::acceptedMouseButtons() Mouse event occurs outside of target window.
PASS : tst_qquickitem::acceptedMouseButtons()
FAIL! : tst_qquickitem::noRepaintWhenHidden() Compared values are not the same
Actual (spy.size()): 1
Expected (0): 0
Loc: [tst_qquickitem.cpp(1744)]
PASS : tst_qquickitem::cleanupTestCase()
Totals: 50 passed, 1 failed, 0 skipped
********* Finished testing of tst_qquickitem *********
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickitem: 8 seconds, exit code 1
Testing tst_QQuickItemLayer
FAIL! : tst_QQuickItemLayer::layerEffect() Compared values are not the same
Actual (fb.pixel(0, 0)): 4278190080
Expected (qRgb(0xff, 0, 0)): 4294901760
Loc: [tst_qquickitemlayer.cpp(188)]
FAIL! : tst_QQuickItemLayer::layerSourceRect() Compared values are not the same
Actual (fb.pixel(0, 0)): 4278190080
Expected (qRgb(0, 0, 0xff)): 4278190335
Loc: [tst_qquickitemlayer.cpp(205)]
FAIL! : tst_QQuickItemLayer::layerIsTextureProvider() Compared values are not the same
Actual (fb.pixel(0, 0)): 4278190080
Expected (qRgb(0xff, 0, 0)): 4294901760
Loc: [tst_qquickitemlayer.cpp(223)]
FAIL! : tst_QQuickItemLayer::changeSamplerName() Compared values are not the same
Actual (fb.pixel(0, 0)): 4278190080
Expected (qRgb(0, 0, 0xff)): 4278190335
Loc: [tst_qquickitemlayer.cpp(405)]
FAIL! : tst_QQuickItemLayer::itemEffect() Compared values are not the same
Actual (fb.pixel(0, 0)): 4278190080
Expected (qRgb(0xff, 0, 0)): 4294901760
Loc: [tst_qquickitemlayer.cpp(413)]
Totals: 24 passed, 5 failed, 1 skipped
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickItemLayer *********
Config: Using QTest library 5.1.0, Qt 5.1.0
PASS : tst_QQuickItemLayer::initTestCase()
PASS : tst_QQuickItemLayer::layerEnabled()
PASS : tst_QQuickItemLayer::layerSmooth()
SKIP : tst_QQuickItemLayer::layerMipmap() Mipmapping does not work with the Mesa Software Rasterizer.
Loc: [tst_qquickitemlayer.cpp(172)]
FAIL! : tst_QQuickItemLayer::layerEffect() Compared values are not the same
Actual (fb.pixel(0, 0)): 4278190080
Expected (qRgb(0xff, 0, 0)): 4294901760
Loc: [tst_qquickitemlayer.cpp(188)]
PASS : tst_QQuickItemLayer::layerVisibility(!effect, !visible, a=1)
PASS : tst_QQuickItemLayer::layerVisibility(!effect, visible, a=1)
PASS : tst_QQuickItemLayer::layerVisibility(effect, !visible, a=1)
PASS : tst_QQuickItemLayer::layerVisibility(effect, visible, a=1)
PASS : tst_QQuickItemLayer::layerVisibility(!effect, !visible, a=.5)
PASS : tst_QQuickItemLayer::layerVisibility(!effect, visible, a=.5)
PASS : tst_QQuickItemLayer::layerVisibility(effect, !visible, a=.5)
PASS : tst_QQuickItemLayer::layerVisibility(effect, visible, a=.5)
PASS : tst_QQuickItemLayer::layerVisibility(!effect, !visible, a=0)
PASS : tst_QQuickItemLayer::layerVisibility(!effect, visible, a=0)
PASS : tst_QQuickItemLayer::layerVisibility(effect, !visible, a=0)
PASS : tst_QQuickItemLayer::layerVisibility(effect, visible, a=0)
FAIL! : tst_QQuickItemLayer::layerSourceRect() Compared values are not the same
Actual (fb.pixel(0, 0)): 4278190080
Expected (qRgb(0, 0, 0xff)): 4278190335
Loc: [tst_qquickitemlayer.cpp(205)]
PASS : tst_QQuickItemLayer::layerZOrder(!effect)
PASS : tst_QQuickItemLayer::layerZOrder(effect)
FAIL! : tst_QQuickItemLayer::layerIsTextureProvider() Compared values are not the same
Actual (fb.pixel(0, 0)): 4278190080
Expected (qRgb(0xff, 0, 0)): 4294901760
Loc: [tst_qquickitemlayer.cpp(223)]
PASS : tst_QQuickItemLayer::changeZOrder(layered, effect)
PASS : tst_QQuickItemLayer::changeZOrder(layered, !effect)
PASS : tst_QQuickItemLayer::changeZOrder(!layered)
PASS : tst_QQuickItemLayer::toggleLayerAndEffect()
PASS : tst_QQuickItemLayer::disableLayer()
QWARN : tst_QQuickItemLayer::changeSamplerName() QQuickShaderEffect: 'foo' does not have a matching property!
FAIL! : tst_QQuickItemLayer::changeSamplerName() Compared values are not the same
Actual (fb.pixel(0, 0)): 4278190080
Expected (qRgb(0, 0, 0xff)): 4278190335
Loc: [tst_qquickitemlayer.cpp(405)]
FAIL! : tst_QQuickItemLayer::itemEffect() Compared values are not the same
Actual (fb.pixel(0, 0)): 4278190080
Expected (qRgb(0xff, 0, 0)): 4294901760
Loc: [tst_qquickitemlayer.cpp(413)]
PASS : tst_QQuickItemLayer::rectangleEffect()
PASS : tst_QQuickItemLayer::cleanupTestCase()
Totals: 24 passed, 5 failed, 1 skipped
********* Finished testing of tst_QQuickItemLayer *********
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickitemlayer: 25 seconds, exit code 5
Build log: http://testresults.qt-project.org/ci/QtDeclarative_stable_Integration/build_00555/linux-g++_developer-build_qtnamespace_qtlibinfix_Ubuntu_11.10_x64/log.txt.gz
Tested changes (refs/builds/stable_1368192504):
http://codereview.qt-project.org/55755 [PS3] - Do not repaint when update()ing an invisible item
More information about the Ci-reports
mailing list