[Ci-reports] fail on ssh://codereview.qt-project.org:29418/qt/qtdeclarative#stable
Qt Continuous Integration System
ci-noreply at qt-project.org
Thu Oct 31 23:22:46 CET 2013
one hundred and eighteen autotests failed :(
Testing tst_TouchMouse
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_TouchMouse *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_TouchMouse::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_touchmouse: 0.749362 seconds, exit code 3221225477
Testing tst_qtqmlmodules
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qtqmlmodules *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qtqmlmodules::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qtqmlmodules: 0.749311 seconds, exit code 3221225477
Testing tst_qquickwindow
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickwindow *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickwindow::initTestCase()
PASS : tst_qquickwindow::constantUpdates()
PASS : tst_qquickwindow::constantUpdatesOnWindow(unblocked, beforeRender)
PASS : tst_qquickwindow::constantUpdatesOnWindow(unblocked, afterRender)
PASS : tst_qquickwindow::constantUpdatesOnWindow(unblocked, swapped)
PASS : tst_qquickwindow::mouseFiltering()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickwindow: 2 seconds, exit code 3221225477
Testing tst_qquickwander
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickwander *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickwander::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickwander: 0.780519 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickvisualdatamodel: 1 seconds, exit code 3221225477
Testing tst_qquickturbulence
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickturbulence *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickturbulence::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickturbulence: 0.764913 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquicktextinput: 1 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquicktext: 1 seconds, exit code 3221225477
Testing tst_qquicktargetdirection
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquicktargetdirection *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquicktargetdirection::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquicktargetdirection: 0.764936 seconds, exit code 3221225477
Testing tst_qquickspritegoal
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickspritegoal *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickspritegoal::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickspritegoal: 0.780547 seconds, exit code 3221225477
Testing tst_qquickrectangleextruder
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickrectangleextruder *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickrectangleextruder::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickrectangleextruder: 0.796133 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickrectangle: 1 seconds, exit code 3221225477
Testing tst_qquickpositioners
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickpositioners *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickpositioners::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickpositioners: 0.796165 seconds, exit code 3221225477
Testing tst_qquickpointdirection
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickpointdirection *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickpointdirection::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickpointdirection: 0.749339 seconds, exit code 3221225477
Testing tst_qquickpointattractor
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickpointattractor *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickpointattractor::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickpointattractor: 0.749308 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickpixmapcache: 1 seconds, exit code 3221225477
Testing tst_QQuickPathView
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickPathView *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQuickPathView::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickpathview: 0.764924 seconds, exit code 3221225477
Testing tst_qquickparticlesystem
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickparticlesystem *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickparticlesystem::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickparticlesystem: 0.764935 seconds, exit code 3221225477
Testing tst_qquickparticlegroup
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickparticlegroup *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickparticlegroup::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickparticlegroup: 0.749347 seconds, exit code 3221225477
Testing tst_QQuickMouseArea
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickMouseArea *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQuickMouseArea::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickmousearea: 0.749312 seconds, exit code 3221225477
Testing tst_qquickmaskextruder
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickmaskextruder *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickmaskextruder::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickmaskextruder: 0.764925 seconds, exit code 3221225477
Testing tst_QQuickListView
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickListView *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQuickListView::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquicklistview: 0.764924 seconds, exit code 3221225477
Testing tst_qquicklineextruder
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquicklineextruder *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquicklineextruder::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquicklineextruder: 0.749323 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickitem2: 1 seconds, exit code 3221225477
Testing tst_qquickitem
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickitem *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickitem::initTestCase()
PASS : tst_qquickitem::noWindow()
PASS : tst_qquickitem::simpleFocus()
PASS : tst_qquickitem::scopedFocus()
PASS : tst_qquickitem::addedToWindow()
PASS : tst_qquickitem::changeParent()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickitem: 1 seconds, exit code 3221225477
Testing tst_qquickimageparticle
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickimageparticle *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickimageparticle::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickimageparticle: 0.780513 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickimage: 1 seconds, exit code 3221225477
Testing tst_qquickgroupgoal
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickgroupgoal *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickgroupgoal::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickgroupgoal: 0.780549 seconds, exit code 3221225477
Testing tst_qquickgravity
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickgravity *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickgravity::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickgravity: 0.764913 seconds, exit code 3221225477
Testing tst_qquickfriction
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickfriction *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickfriction::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickfriction: 0.76493 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickfontloader: 1 seconds, exit code 3221225477
Testing tst_qquickfocusscope
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickfocusscope *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickfocusscope::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickfocusscope: 0.780542 seconds, exit code 3221225477
Testing tst_qquickellipseextruder
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickellipseextruder *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickellipseextruder::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickellipseextruder: 0.7805 seconds, exit code 3221225477
Testing tst_qquickcustomaffector
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickcustomaffector *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickcustomaffector::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickcustomaffector: 0.749331 seconds, exit code 3221225477
Testing tst_qquickcumulativedirection
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickcumulativedirection *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickcumulativedirection::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickcumulativedirection: 0.749326 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickcanvasitem: 1 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickborderimage: 1 seconds, exit code 3221225477
Testing tst_qquickanimatedimage
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickanimatedimage *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickanimatedimage::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickanimatedimage: 0.76491 seconds, exit code 3221225477
Testing tst_qquickangleddirection
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickangleddirection *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickangleddirection::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickangleddirection: 0.749321 seconds, exit code 3221225477
Testing tst_qquickage
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickage *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickage::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickage: 0.749335 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlsqldatabase: 1 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlqt: 1 seconds, exit code 3221225477
Testing tst_QQmlProfilerService
FAIL! : tst_QQmlProfilerService::blockingConnectWithTraceEnabled() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::blockingConnectWithTraceEnabled() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(342) : failure location
FAIL! : tst_QQmlProfilerService::blockingConnectWithTraceDisabled() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::blockingConnectWithTraceDisabled() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(362) : failure location
FAIL! : tst_QQmlProfilerService::nonBlockingConnect() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::nonBlockingConnect() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(384) : failure location
FAIL! : tst_QQmlProfilerService::pixmapCacheData() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::pixmapCacheData() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(403) : failure location
FAIL! : tst_QQmlProfilerService::scenegraphData() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::scenegraphData() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(449) : failure location
FAIL! : tst_QQmlProfilerService::profileOnExit() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::profileOnExit() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(482) : failure location
Totals: 2 passed, 12 failed, 0 skipped
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQmlProfilerService *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQmlProfilerService::initTestCase()
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceEnabled() An error occurred while waiting for debug process to become available:
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceEnabled() Process crashed.
FAIL! : tst_QQmlProfilerService::blockingConnectWithTraceEnabled() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::blockingConnectWithTraceEnabled() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(342) : failure location
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceEnabled() Process State: "not running (crashed!)"
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceEnabled() Application Output: ""
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceEnabled() Connection State: "null"
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceEnabled() Client State: "null"
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceDisabled() An error occurred while waiting for debug process to become available:
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceDisabled() Process crashed.
FAIL! : tst_QQmlProfilerService::blockingConnectWithTraceDisabled() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::blockingConnectWithTraceDisabled() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(362) : failure location
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceDisabled() Process State: "not running (crashed!)"
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceDisabled() Application Output: ""
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceDisabled() Connection State: "null"
QDEBUG : tst_QQmlProfilerService::blockingConnectWithTraceDisabled() Client State: "null"
QDEBUG : tst_QQmlProfilerService::nonBlockingConnect() An error occurred while waiting for debug process to become available:
QDEBUG : tst_QQmlProfilerService::nonBlockingConnect() Process crashed.
FAIL! : tst_QQmlProfilerService::nonBlockingConnect() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::nonBlockingConnect() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(384) : failure location
QDEBUG : tst_QQmlProfilerService::nonBlockingConnect() Process State: "not running (crashed!)"
QDEBUG : tst_QQmlProfilerService::nonBlockingConnect() Application Output: ""
QDEBUG : tst_QQmlProfilerService::nonBlockingConnect() Connection State: "null"
QDEBUG : tst_QQmlProfilerService::nonBlockingConnect() Client State: "null"
QDEBUG : tst_QQmlProfilerService::pixmapCacheData() An error occurred while waiting for debug process to become available:
QDEBUG : tst_QQmlProfilerService::pixmapCacheData() Process crashed.
FAIL! : tst_QQmlProfilerService::pixmapCacheData() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::pixmapCacheData() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(403) : failure location
QDEBUG : tst_QQmlProfilerService::pixmapCacheData() Process State: "not running (crashed!)"
QDEBUG : tst_QQmlProfilerService::pixmapCacheData() Application Output: ""
QDEBUG : tst_QQmlProfilerService::pixmapCacheData() Connection State: "null"
QDEBUG : tst_QQmlProfilerService::pixmapCacheData() Client State: "null"
QDEBUG : tst_QQmlProfilerService::scenegraphData() An error occurred while waiting for debug process to become available:
QDEBUG : tst_QQmlProfilerService::scenegraphData() Process crashed.
FAIL! : tst_QQmlProfilerService::scenegraphData() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::scenegraphData() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(449) : failure location
QDEBUG : tst_QQmlProfilerService::scenegraphData() Process State: "not running (crashed!)"
QDEBUG : tst_QQmlProfilerService::scenegraphData() Application Output: ""
QDEBUG : tst_QQmlProfilerService::scenegraphData() Connection State: "null"
QDEBUG : tst_QQmlProfilerService::scenegraphData() Client State: "null"
QDEBUG : tst_QQmlProfilerService::profileOnExit() An error occurred while waiting for debug process to become available:
QDEBUG : tst_QQmlProfilerService::profileOnExit() Process crashed.
FAIL! : tst_QQmlProfilerService::profileOnExit() 'm_process->waitForSessionStart()' returned FALSE. (Could not launch application, or did not get 'Waiting for connection'.)
tst_qqmlprofilerservice.cpp(314) : failure location
FAIL! : tst_QQmlProfilerService::profileOnExit() 'm_client' returned FALSE. ()
tst_qqmlprofilerservice.cpp(482) : failure location
QDEBUG : tst_QQmlProfilerService::profileOnExit() Process State: "not running (crashed!)"
QDEBUG : tst_QQmlProfilerService::profileOnExit() Application Output: ""
QDEBUG : tst_QQmlProfilerService::profileOnExit() Connection State: "null"
QDEBUG : tst_QQmlProfilerService::profileOnExit() Client State: "null"
PASS : tst_QQmlProfilerService::cleanupTestCase()
Totals: 2 passed, 12 failed, 0 skipped
********* Finished testing of tst_QQmlProfilerService *********
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlprofilerservice: 1 seconds, exit code 12
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlnotifier: 1 seconds, exit code 3221225477
Testing tst_qqmlmoduleplugin
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qqmlmoduleplugin *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qqmlmoduleplugin::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlmoduleplugin: 0.78051 seconds, exit code 3221225477
Testing tst_qqmllistmodelworkerscript
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qqmllistmodelworkerscript *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
(... 232 lines omitted; there are too many errors!)
PASS : tst_qquickshadereffect::lookThroughShaderCode(preprocessor directive between)
PASS : tst_qquickshadereffect::lookThroughShaderCode(newline between)
PASS : tst_qquickshadereffect::lookThroughShaderCode(extra characters #1)
PASS : tst_qquickshadereffect::lookThroughShaderCode(extra characters #2)
PASS : tst_qquickshadereffect::lookThroughShaderCode(missing characters #1)
PASS : tst_qquickshadereffect::lookThroughShaderCode(missing characters #2)
PASS : tst_qquickshadereffect::lookThroughShaderCode(precision)
PASS : tst_qquickshadereffect::lookThroughShaderCode(property name #1)
PASS : tst_qquickshadereffect::lookThroughShaderCode(property name #2)
PASS : tst_qquickshadereffect::lookThroughShaderCode(property name #3)
PASS : tst_qquickshadereffect::lookThroughShaderCode(property name #4)
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickshadereffect: 0.806705 seconds, exit code 3221225477
Testing tst_qquickscreen
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickscreen *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickscreen::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickscreen: 0.801825 seconds, exit code 3221225477
Testing tst_QQuickRepeater
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickRepeater *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQuickRepeater::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickrepeater: 0.7926 seconds, exit code 3221225477
Testing tst_QQuickPinchArea
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickPinchArea *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQuickPinchArea::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickpincharea: 0.796587 seconds, exit code 3221225477
Testing tst_QuickPath
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QuickPath *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QuickPath::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickpath: 0.801555 seconds, exit code 3221225477
Testing tst_QQuickMultiPointTouchArea
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickMultiPointTouchArea *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQuickMultiPointTouchArea::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickmultipointtoucharea: 0.808939 seconds, exit code 3221225477
Testing tst_qquickitemparticle
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickitemparticle *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickitemparticle::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickitemparticle: 0.823434 seconds, exit code 3221225477
Testing tst_QQuickItemLayer
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickItemLayer *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQuickItemLayer::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickitemlayer: 0.811692 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickfolderlistmodel: 1 seconds, exit code 3221225477
Testing tst_qquickimageprovider
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickimageprovider *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickimageprovider::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickimageprovider: 0.811675 seconds, exit code 3221225477
Testing tst_QQuickFramebufferObject
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickFramebufferObject *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQuickFramebufferObject::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickframebufferobject: 0.811688 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickflipable: 1 seconds, exit code 3221225477
Testing tst_qquickdynamicpropertyanimation
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickdynamicpropertyanimation *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickdynamicpropertyanimation: 0.827327 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickdroparea: 1 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickdrag: 1 seconds, exit code 3221225477
Testing tst_qquickcustomparticle
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickcustomparticle *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickcustomparticle::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickcustomparticle: 0.827278 seconds, exit code 3221225477
Testing tst_qquickbehaviors
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickbehaviors *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickbehaviors::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickbehaviors: 0.811663 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickapplication: 1 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickanimationcontroller: 1 seconds, exit code 3221225477
Testing tst_qquickanimations
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickanimations *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickanimations: 0.811718 seconds, exit code 3221225477
Testing tst_qquickanimatedsprite
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickanimatedsprite *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickanimatedsprite::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickanimatedsprite: 0.796091 seconds, exit code 3221225477
Testing tst_qquickanchors
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qquickanchors *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qquickanchors::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickanchors: 0.796077 seconds, exit code 3221225477
Testing tst_QQuickAccessible
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickAccessible *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQuickAccessible::initTestCase()
QDEBUG : tst_QQuickAccessible::commonTests(StaticText) testing "statictext.qml"
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qquickaccessible: 0.780494 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlvaluetypes: 1 seconds, exit code 3221225477
Testing tst_qqmlvaluetypeproviders
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qqmlvaluetypeproviders *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qqmlvaluetypeproviders::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlvaluetypeproviders: 0.811706 seconds, exit code 3221225477
Testing tst_QQMLTypeLoader
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQMLTypeLoader *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQMLTypeLoader::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmltypeloader: 0.796095 seconds, exit code 3221225477
Testing tst_qqmltranslation
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qqmltranslation *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qqmltranslation::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmltranslation: 0.796087 seconds, exit code 3221225477
Testing tst_QQmlSettings
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQmlSettings *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQmlSettings::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlsettings: 0.796068 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlpropertycache: 1 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlproperty: 1 seconds, exit code 3221225477
Testing tst_qqmlmetatype
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qqmlmetatype *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qqmlmetatype::initTestCase()
PASS : tst_qqmlmetatype::qmlParserStatusCast()
PASS : tst_qqmlmetatype::qmlPropertyValueSourceCast()
PASS : tst_qqmlmetatype::qmlPropertyValueInterceptorCast()
PASS : tst_qqmlmetatype::qmlType()
PASS : tst_qqmlmetatype::invalidQmlTypeName()
PASS : tst_qqmlmetatype::registrationType()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlmetatype: 0.811682 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmllocale: 1 seconds, exit code 3221225477
Testing tst_QQmlMetaObject
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQmlMetaObject *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QQmlMetaObject::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlmetaobject: 0.796066 seconds, exit code 3221225477
Testing tst_qqmllistreference
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qqmllistreference *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qqmllistreference::initTestCase()
PASS : tst_qqmllistreference::qmllistreference()
PASS : tst_qqmllistreference::qmllistreference_invalid()
PASS : tst_qqmllistreference::isValid()
PASS : tst_qqmllistreference::object()
PASS : tst_qqmllistreference::listElementType()
PASS : tst_qqmllistreference::canAppend()
PASS : tst_qqmllistreference::canAt()
PASS : tst_qqmllistreference::canClear()
PASS : tst_qqmllistreference::canCount()
PASS : tst_qqmllistreference::isReadable()
PASS : tst_qqmllistreference::isManipulable()
PASS : tst_qqmllistreference::append()
PASS : tst_qqmllistreference::at()
PASS : tst_qqmllistreference::clear()
PASS : tst_qqmllistreference::count()
PASS : tst_qqmllistreference::copy()
PASS : tst_qqmllistreference::qmlmetaproperty()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmllistreference: 0.811715 seconds, exit code 3221225477
Testing tst_qqmllistmodel
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qqmllistmodel *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qqmllistmodel::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmllistmodel: 0.796075 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlinfo: 1 seconds, exit code 3221225477
Testing tst_qqmlinstruction
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qqmlinstruction *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qqmlinstruction::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlinstruction: 0.792197 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlincubator: 1 seconds, exit code 3221225477
Testing tst_qqmlexpression
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qqmlexpression *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qqmlexpression::initTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlexpression: 0.784408 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlcontext: 1 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlconnections: 1 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qqmlbinding: 1 seconds, exit code 3221225477
Testing tst_qmlplugindump
FAIL! : tst_qmlplugindump::builtins() crashed
tst_qmlplugindump.cpp(103) : failure location
Totals: 2 passed, 1 failed, 0 skipped
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qmlplugindump *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qmlplugindump::initTestCase()
QWARN : tst_qmlplugindump::builtins() "Error while running 'C:/work/build/qt/qtbase/bin/qmlplugindump.exe -builtins'"
QWARN : tst_qmlplugindump::builtins() stderr:
""
FAIL! : tst_qmlplugindump::builtins() crashed
tst_qmlplugindump.cpp(103) : failure location
PASS : tst_qmlplugindump::cleanupTestCase()
Totals: 2 passed, 1 failed, 0 skipped
********* Finished testing of tst_qmlplugindump *********
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qmlplugindump: 0.88961 seconds, exit code 1
Testing tst_QJSValueIterator
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QJSValueIterator *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QJSValueIterator::initTestCase()
PASS : tst_QJSValueIterator::iterateForward(no properties)
PASS : tst_QJSValueIterator::iterateForward(foo=bar)
PASS : tst_QJSValueIterator::iterateForward(foo=bar, baz=123)
PASS : tst_QJSValueIterator::iterateForward(foo=bar, baz=123, rab=oof)
PASS : tst_QJSValueIterator::iterateArray(no elements)
PASS : tst_QJSValueIterator::iterateArray(0=foo, 1=barr)
PASS : tst_QJSValueIterator::iterateArray(0=foo, 3=barr)
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qjsvalueiterator: 0.764859 seconds, exit code 3221225477
Testing tst_QJSValue
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QJSValue *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QJSValue::initTestCase()
PASS : tst_QJSValue::ctor_invalid()
PASS : tst_QJSValue::ctor_undefinedWithEngine()
PASS : tst_QJSValue::ctor_undefined()
PASS : tst_QJSValue::ctor_nullWithEngine()
PASS : tst_QJSValue::ctor_null()
PASS : tst_QJSValue::ctor_boolWithEngine()
PASS : tst_QJSValue::ctor_bool()
PASS : tst_QJSValue::ctor_intWithEngine()
PASS : tst_QJSValue::ctor_int()
PASS : tst_QJSValue::ctor_uintWithEngine()
PASS : tst_QJSValue::ctor_uint()
PASS : tst_QJSValue::ctor_floatWithEngine()
PASS : tst_QJSValue::ctor_float()
PASS : tst_QJSValue::ctor_stringWithEngine()
PASS : tst_QJSValue::ctor_string()
PASS : tst_QJSValue::ctor_copyAndAssignWithEngine()
PASS : tst_QJSValue::ctor_copyAndAssign()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qjsvalue: 0.799505 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_examples: 2 seconds, exit code 3221225477
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_parserstress: 2 seconds, exit code 3221225477
Testing tst_qjsonbinding
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_qjsonbinding *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_qjsonbinding::initTestCase()
PASS : tst_qjsonbinding::cppJsConversion(true)
PASS : tst_qjsonbinding::cppJsConversion(false)
PASS : tst_qjsonbinding::cppJsConversion(null)
PASS : tst_qjsonbinding::cppJsConversion(number.0)
PASS : tst_qjsonbinding::cppJsConversion(number.1)
PASS : tst_qjsonbinding::cppJsConversion(string.0)
PASS : tst_qjsonbinding::cppJsConversion(undefined)
PASS : tst_qjsonbinding::cppJsConversion(object.0)
PASS : tst_qjsonbinding::cppJsConversion(object.1)
PASS : tst_qjsonbinding::cppJsConversion(object.2)
PASS : tst_qjsonbinding::cppJsConversion(object.3)
PASS : tst_qjsonbinding::cppJsConversion(object.4)
PASS : tst_qjsonbinding::cppJsConversion(array.0)
PASS : tst_qjsonbinding::cppJsConversion(array.1)
PASS : tst_qjsonbinding::cppJsConversion(array.2)
PASS : tst_qjsonbinding::cppJsConversion(array.3)
PASS : tst_qjsonbinding::cppJsConversion(array.4)
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qjsonbinding: 0.825575 seconds, exit code 3221225477
Testing tst_QJSEngine
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QJSEngine *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QJSEngine::initTestCase()
PASS : tst_QJSEngine::constructWithParent()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_qjsengine: 0.83835 seconds, exit code 3221225477
Build log: http://testresults.qt-project.org/ci/QtDeclarative_stable_Integration/build_01256/win64-msvc2012_developer-build_qtnamespace_Windows_8/log.txt.gz
Tested changes (refs/builds/stable_1383260193):
http://codereview.qt-project.org/69631 [PS3] - Enable JIT for Windows 64-bit
More information about the Ci-reports
mailing list