[Ci-reports] fail on QtBase_dev_Integration #4632
Qt Continuous Integration System
ci-noreply at qt-project.org
Fri Dec 5 06:14:38 CET 2014
Autotest `tst_spdy' failed :(
The test was determined to be flaky, meaning results were not consistent across multiple runs. This might make the problem difficult to reproduce. Also, flaky failures might or might not be related to any recent changes in the source code.
Testing tst_Spdy
FAIL! : tst_Spdy::download(mediumfile-socks-proxy-auth) '!QTestEventLoop::instance().timeout()' returned FALSE. ()
tst_spdy.cpp(272) : failure location
FAIL! : tst_Spdy::download(bigfile) '!QTestEventLoop::instance().timeout()' returned FALSE. ()
tst_spdy.cpp(272) : failure location
FAIL! : tst_Spdy::headerFields() '!QTestEventLoop::instance().timeout()' returned FALSE. ()
tst_spdy.cpp(315) : failure location
FAIL! : tst_Spdy::upload(empty) '!QTestEventLoop::instance().timeout()' returned FALSE. ()
tst_spdy.cpp(507) : failure location
FAIL! : tst_Spdy::upload(generic) '!QTestEventLoop::instance().timeout()' returned FALSE. ()
tst_spdy.cpp(507) : failure location
FAIL! : tst_Spdy::upload(small) '!QTestEventLoop::instance().timeout()' returned FALSE. ()
tst_spdy.cpp(507) : failure location
FAIL! : tst_Spdy::upload(with-nul) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
FAIL! : tst_Spdy::upload(4k+1) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
FAIL! : tst_Spdy::upload(4k+1-with-http-proxy) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
FAIL! : tst_Spdy::upload(4k+1-with-http-proxy-auth) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
FAIL! : tst_Spdy::upload(4k+1-with-socks-proxy) Compared values are not the same
Actual (finishedManagerSpy.count()): 2
Expected (1) : 1
tst_spdy.cpp(509) : failure location
FAIL! : tst_Spdy::upload(4k+1-with-socks-proxy-auth) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
FAIL! : tst_Spdy::upload(128k+1) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
FAIL! : tst_Spdy::upload(128k+1-put) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
FAIL! : tst_Spdy::upload(2MB+1) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
FAIL! : tst_Spdy::upload(file-26K) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
FAIL! : tst_Spdy::upload(file-1MB) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
FAIL! : tst_Spdy::upload(multipart-3images) Compared values are not the same
Actual (metaDataChangedSpy.count()): 0
Expected (1) : 1
tst_spdy.cpp(510) : failure location
Totals: 21 passed, 18 failed, 0 skipped, 0 blacklisted
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_Spdy *********
Config: Using QtTest library 5.5.0, Qt 5.5.0 (x86_64-little_endian-llp64 shared (dynamic) release build; by MSVC 2012)
PASS : tst_Spdy::initTestCase()
PASS : tst_Spdy::settingsAndNegotiation(default-settings)
PASS : tst_Spdy::settingsAndNegotiation(http-url)
PASS : tst_Spdy::settingsAndNegotiation(spdy-disabled)
PASS : tst_Spdy::settingsAndNegotiation(spdy-enabled)
PASS : tst_Spdy::download(mediumfile)
PASS : tst_Spdy::download(mediumfile-http-proxy)
QWARN : tst_Spdy::download(mediumfile-http-proxy-auth) QNativeSocketEngine::read() was called not in QAbstractSocket::ConnectedState or QAbstractSocket::BoundState
PASS : tst_Spdy::download(mediumfile-http-proxy-auth)
PASS : tst_Spdy::download(mediumfile-socks-proxy)
QWARN : tst_Spdy::download(mediumfile-socks-proxy-auth) QNativeSocketEngine::read() was called not in QAbstractSocket::ConnectedState or QAbstractSocket::BoundState
PASS : tst_Spdy::download(mediumfile-socks-proxy-auth)
PASS : tst_Spdy::download(bigfile)
PASS : tst_Spdy::headerFields()
PASS : tst_Spdy::upload(empty)
PASS : tst_Spdy::upload(generic)
PASS : tst_Spdy::upload(small)
PASS : tst_Spdy::upload(with-nul)
PASS : tst_Spdy::upload(4k+1)
PASS : tst_Spdy::upload(4k+1-with-http-proxy)
PASS : tst_Spdy::upload(4k+1-with-http-proxy-auth)
PASS : tst_Spdy::upload(4k+1-with-socks-proxy)
PASS : tst_Spdy::upload(4k+1-with-socks-proxy-auth)
PASS : tst_Spdy::upload(128k+1)
PASS : tst_Spdy::upload(128k+1-put)
PASS : tst_Spdy::upload(2MB+1)
PASS : tst_Spdy::upload(file-26K)
PASS : tst_Spdy::upload(file-1MB)
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
QtQA::App::TestRunner: first attempt: exited with exit code 18
QtQA::App::TestRunner: second attempt: exited with exit code 3221225477
QtQA::App::TestRunner: the test seems to be flaky, please fix this
QtQA::App::TestRunner: this flaky test is being treated as a FAIL
QtQA::App::TestRunner: end tst_spdy: 126 seconds, exit code 3221225477
Build log: http://testresults.qt-project.org/ci/QtBase_dev_Integration/build_04632/win64-msvc2012_developer-build_qtnamespace_Windows_81/log.txt.gz
Tested changes (refs/builds/dev_1417751717):
http://codereview.qt-project.org/101398 [PS2] - Fix regression introduced by 8e3fdf13543f43d7a4cb4fa41f
More information about the Ci-reports
mailing list