[Ci-reports] fail on QtDeclarative_dev_Integration #2069
Qt Continuous Integration System
ci-noreply at qt-project.org
Tue Dec 9 21:08:36 CET 2014
Autotest `tst_qquickpathview' failed :(
The test was determined to be flaky, meaning results were not consistent across multiple runs. This might make the problem difficult to reproduce. Also, flaky failures might or might not be related to any recent changes in the source code.
Testing tst_QQuickPathView
FAIL! : tst_QQuickPathView::mouseDrag() 'pathview->isMoving()' returned FALSE. ()
tst_qquickpathview.cpp(1506) : failure location
FAIL! : tst_QQuickPathView::nestedMouseAreaDrag() '!pathview->isMoving()' returned FALSE. ()
tst_qquickpathview.cpp(1544) : failure location
Totals: 128 passed, 2 failed, 0 skipped, 0 blacklisted
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QQuickPathView *********
Config: Using QtTest library 5.5.0, Qt 5.5.0 (i386-little_endian-ilp32 shared (dynamic) release build; by MSVC 2010)
PASS : tst_QQuickPathView::initTestCase()
PASS : tst_QQuickPathView::initValues()
PASS : tst_QQuickPathView::items()
PASS : tst_QQuickPathView::dataModel()
PASS : tst_QQuickPathView::pathview2()
PASS : tst_QQuickPathView::pathview3()
PASS : tst_QQuickPathView::initialCurrentIndex()
PASS : tst_QQuickPathView::initialCurrentItem()
PASS : tst_QQuickPathView::insertModel(insert after current)
PASS : tst_QQuickPathView::insertModel(insert before current)
PASS : tst_QQuickPathView::insertModel(insert multiple after current)
PASS : tst_QQuickPathView::insertModel(insert multiple before current)
PASS : tst_QQuickPathView::insertModel(insert at end)
PASS : tst_QQuickPathView::insertModel(insert at beginning)
PASS : tst_QQuickPathView::insertModel(insert at current)
PASS : tst_QQuickPathView::insertModel(no range - insert after current)
PASS : tst_QQuickPathView::insertModel(no range - insert before current)
PASS : tst_QQuickPathView::insertModel(no range - insert multiple after current)
PASS : tst_QQuickPathView::insertModel(no range - insert multiple before current)
PASS : tst_QQuickPathView::insertModel(no range - insert at end)
PASS : tst_QQuickPathView::insertModel(no range - insert at beginning)
PASS : tst_QQuickPathView::insertModel(no range - insert at current)
PASS : tst_QQuickPathView::removeModel(remove after current)
PASS : tst_QQuickPathView::removeModel(remove before current)
PASS : tst_QQuickPathView::removeModel(remove multiple after current)
PASS : tst_QQuickPathView::removeModel(remove multiple before current)
PASS : tst_QQuickPathView::removeModel(remove last)
PASS : tst_QQuickPathView::removeModel(remove first)
PASS : tst_QQuickPathView::removeModel(remove current)
PASS : tst_QQuickPathView::removeModel(remove all)
PASS : tst_QQuickPathView::removeModel(no range - remove after current)
PASS : tst_QQuickPathView::removeModel(no range - remove before current)
PASS : tst_QQuickPathView::removeModel(no range - remove multiple after current)
PASS : tst_QQuickPathView::removeModel(no range - remove multiple before current)
PASS : tst_QQuickPathView::removeModel(no range - remove last)
PASS : tst_QQuickPathView::removeModel(no range - remove first)
PASS : tst_QQuickPathView::removeModel(no range - remove current offset)
PASS : tst_QQuickPathView::removeModel(no range - remove all)
PASS : tst_QQuickPathView::moveModel(move after current)
PASS : tst_QQuickPathView::moveModel(move before current)
PASS : tst_QQuickPathView::moveModel(move before current to after)
PASS : tst_QQuickPathView::moveModel(move multiple after current)
PASS : tst_QQuickPathView::moveModel(move multiple before current)
PASS : tst_QQuickPathView::moveModel(move before current to end)
PASS : tst_QQuickPathView::moveModel(move last to beginning)
PASS : tst_QQuickPathView::moveModel(move current)
PASS : tst_QQuickPathView::moveModel(no range - move after current)
PASS : tst_QQuickPathView::moveModel(no range - move before current)
PASS : tst_QQuickPathView::moveModel(no range - move before current to after)
PASS : tst_QQuickPathView::moveModel(no range - move multiple after current)
PASS : tst_QQuickPathView::moveModel(no range - move multiple before current)
PASS : tst_QQuickPathView::moveModel(no range - move before current to end)
PASS : tst_QQuickPathView::moveModel(no range - move last to beginning)
PASS : tst_QQuickPathView::moveModel(no range - move current)
PASS : tst_QQuickPathView::moveModel(no range - move multiple incl. current)
PASS : tst_QQuickPathView::consecutiveModelChanges(no range - insert after, insert before)
PASS : tst_QQuickPathView::consecutiveModelChanges(no range - remove after, remove before)
PASS : tst_QQuickPathView::consecutiveModelChanges(no range - remove after, insert before)
PASS : tst_QQuickPathView::consecutiveModelChanges(no range - insert after, remove before)
PASS : tst_QQuickPathView::consecutiveModelChanges(no range - insert, remove all, polish, insert)
PASS : tst_QQuickPathView::path()
PASS : tst_QQuickPathView::pathMoved()
PASS : tst_QQuickPathView::offset(0.0)
PASS : tst_QQuickPathView::offset(1.0)
PASS : tst_QQuickPathView::offset(5.0)
PASS : tst_QQuickPathView::offset(4.6)
PASS : tst_QQuickPathView::offset(4.4)
PASS : tst_QQuickPathView::offset(5.4)
PASS : tst_QQuickPathView::offset(5.6)
PASS : tst_QQuickPathView::setCurrentIndex()
PASS : tst_QQuickPathView::resetModel()
PASS : tst_QQuickPathView::propertyChanges()
PASS : tst_QQuickPathView::pathChanges()
PASS : tst_QQuickPathView::componentChanges()
PASS : tst_QQuickPathView::modelChanges()
PASS : tst_QQuickPathView::pathUpdateOnStartChanged()
PASS : tst_QQuickPathView::package()
PASS : tst_QQuickPathView::emptyModel()
PASS : tst_QQuickPathView::emptyPath()
PASS : tst_QQuickPathView::closed()
PASS : tst_QQuickPathView::pathUpdate()
PASS : tst_QQuickPathView::visualDataModel()
PASS : tst_QQuickPathView::undefinedPath()
FAIL! : tst_QQuickPathView::mouseDrag() 'pathview->isMoving()' returned FALSE. ()
tst_qquickpathview.cpp(1506) : failure location
PASS : tst_QQuickPathView::nestedMouseAreaDrag()
PASS : tst_QQuickPathView::treeModel()
PASS : tst_QQuickPathView::changePreferredHighlight()
PASS : tst_QQuickPathView::missingPercent()
PASS : tst_QQuickPathView::creationContext()
PASS : tst_QQuickPathView::currentOffsetOnInsertion()
PASS : tst_QQuickPathView::asynchronous()
PASS : tst_QQuickPathView::cancelDrag()
PASS : tst_QQuickPathView::maximumFlickVelocity()
PASS : tst_QQuickPathView::snapToItem(no enforce range)
PASS : tst_QQuickPathView::snapToItem(enforce range)
PASS : tst_QQuickPathView::snapOneItem(no enforce range)
PASS : tst_QQuickPathView::snapOneItem(enforce range)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, all items, Beginning)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, all items, Center)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, all items, End)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, Beginning)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, Center)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, End)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, init offset 4.0, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(no range, 5 items, init offset 3.0, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, Beginning)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, Center)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, End)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, init offset 1.0, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, all items, SnapPosition)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, Beginning)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, Center)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, End)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, init offset 1.0, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, init offset 2.0, Contain)
PASS : tst_QQuickPathView::positionViewAtIndex(strict range, 5 items, SnapPosition)
PASS : tst_QQuickPathView::indexAt_itemAt(Item 0 - 585, 95)
PASS : tst_QQuickPathView::indexAt_itemAt(Item 0 - 660, 165)
PASS : tst_QQuickPathView::indexAt_itemAt(No Item a - 580, 95)
PASS : tst_QQuickPathView::indexAt_itemAt(No Item b - 585, 85)
PASS : tst_QQuickPathView::indexAt_itemAt(Item 7 - 360, 200)
PASS : tst_QQuickPathView::cacheItemCount()
QWARN : tst_QQuickPathView::changePathDuringRefill() QWindowsWindow::setGeometryDp: Unable to set geometry 100x39+527+263 on QQuickView/''. Resulting geometry: 104x39+527+263 (frame: 4, 23, 4, 4, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).
PASS : tst_QQuickPathView::changePathDuringRefill()
PASS : tst_QQuickPathView::nestedinFlickable()
PASS : tst_QQuickPathView::flickableDelegate()
PASS : tst_QQuickPathView::jsArrayChange()
PASS : tst_QQuickPathView::cleanupTestCase()
Totals: 129 passed, 1 failed, 0 skipped, 0 blacklisted
********* Finished testing of tst_QQuickPathView *********
QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
QtQA::App::TestRunner: first attempt: exited with exit code 2
QtQA::App::TestRunner: second attempt: exited with exit code 1
QtQA::App::TestRunner: the test seems to be flaky, please fix this
QtQA::App::TestRunner: this flaky test is being treated as a FAIL
QtQA::App::TestRunner: end tst_qquickpathview: 114 seconds, exit code 1
Build log: http://testresults.qt-project.org/ci/QtDeclarative_dev_Integration/build_02069/win32-msvc2010_developer-build_angle_Windows_7/log.txt.gz
Tested changes (refs/builds/dev_1418152083):
http://codereview.qt-project.org/100626 [PS2] - Move function definition where it belongs
More information about the Ci-reports
mailing list