[Ci-reports] fail on QtDeclarative_dev_Integration #1618

[Qt Continuous Integration System]

Autotests `tst_qquickmultipointtoucharea' and `tst_qquickwidget' failed :(

Some (not all) of the tests were determined to be flaky, meaning results were not consistent across multiple runs.  This might make the problem difficult to reproduce.  Also, flaky failures might or might not be related to any recent changes in the source code.

  Testing tst_qquickwidget
  FAIL!  : tst_qquickwidget::readback() Compared values are not the same
     Actual   (pix)            : 4294967295
     Expected (qRgb(255, 0, 0)): 4294901760
     Loc: [tst_qquickwidget.cpp(267)]
  Totals: 8 passed, 1 failed, 0 skipped
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_qquickwidget *********
  Config: Using QtTest library 5.4.0, Qt 5.4.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by Clang 4.1 ((tags/Apple/clang-421.11.66)) (Apple))
  PASS   : tst_qquickwidget::initTestCase()
  PASS   : tst_qquickwidget::showHide()
  PASS   : tst_qquickwidget::reparentAfterShow()
  PASS   : tst_qquickwidget::changeGeometry()
  PASS   : tst_qquickwidget::resizemodeitem()
  PASS   : tst_qquickwidget::errors()
  PASS   : tst_qquickwidget::engine()
  FAIL!  : tst_qquickwidget::readback() Compared values are not the same
     Actual   (pix)            : 4294967295
     Expected (qRgb(255, 0, 0)): 4294901760
     Loc: [tst_qquickwidget.cpp(267)]
  PASS   : tst_qquickwidget::cleanupTestCase()
  Totals: 8 passed, 1 failed, 0 skipped
  ********* Finished testing of tst_qquickwidget *********
  QtQA::App::TestRunner: test failure could be reproduced twice consecutively
  QtQA::App::TestRunner: end tst_qquickwidget: 2 seconds, exit code 1
  
  Testing tst_QQuickMultiPointTouchArea
  FAIL!  : tst_QQuickMultiPointTouchArea::inMouseArea() 'mouseArea->property("pressed").toBool()' returned FALSE. ()
     Loc: [tst_qquickmultipointtoucharea.cpp(890)]
  FAIL!  : tst_QQuickMultiPointTouchArea::mouseAsTouchpoint() Compared values are not the same
     Actual   (touch1rect->property("y").toInt()): 10
     Expected (touch1.y())                       : 20
     Loc: [tst_qquickmultipointtoucharea.cpp(941)]
  FAIL!  : tst_QQuickMultiPointTouchArea::mouseInteraction(left) Compared values are not the same
     Actual   (area->property("touchCount").toInt()): 0
     Expected (accept)                              : 1
     Loc: [tst_qquickmultipointtoucharea.cpp(1196)]
  Totals: 20 passed, 3 failed, 0 skipped
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_QQuickMultiPointTouchArea *********
  Config: Using QtTest library 5.4.0, Qt 5.4.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by Clang 4.1 ((tags/Apple/clang-421.11.66)) (Apple))
  PASS   : tst_QQuickMultiPointTouchArea::initTestCase()
  PASS   : tst_QQuickMultiPointTouchArea::properties()
  PASS   : tst_QQuickMultiPointTouchArea::signalTest()
  PASS   : tst_QQuickMultiPointTouchArea::release()
  PASS   : tst_QQuickMultiPointTouchArea::reuse()
  PASS   : tst_QQuickMultiPointTouchArea::nonOverlapping()
  PASS   : tst_QQuickMultiPointTouchArea::nested()
  FAIL!  : tst_QQuickMultiPointTouchArea::inFlickable() Compared values are not the same
     Actual   (point11->pressed()): 0
     Expected (true)              : 1
     Loc: [tst_qquickmultipointtoucharea.cpp(641)]
  PASS   : tst_QQuickMultiPointTouchArea::inFlickable2()
  PASS   : tst_QQuickMultiPointTouchArea::inMouseArea()
  PASS   : tst_QQuickMultiPointTouchArea::mouseAsTouchpoint()
  PASS   : tst_QQuickMultiPointTouchArea::invisible()
  PASS   : tst_QQuickMultiPointTouchArea::transformedTouchArea(1st point inside)
  PASS   : tst_QQuickMultiPointTouchArea::transformedTouchArea(2nd point inside)
  PASS   : tst_QQuickMultiPointTouchArea::transformedTouchArea(3rd point inside)
  PASS   : tst_QQuickMultiPointTouchArea::transformedTouchArea(all points inside)
  PASS   : tst_QQuickMultiPointTouchArea::transformedTouchArea(all points outside)
  PASS   : tst_QQuickMultiPointTouchArea::transformedTouchArea(1st and 2nd points inside)
  PASS   : tst_QQuickMultiPointTouchArea::transformedTouchArea(1st and 3rd points inside)
  PASS   : tst_QQuickMultiPointTouchArea::mouseInteraction(left)
  PASS   : tst_QQuickMultiPointTouchArea::mouseInteraction(right)
  PASS   : tst_QQuickMultiPointTouchArea::mouseInteraction(middle)
  PASS   : tst_QQuickMultiPointTouchArea::cleanupTestCase()
  Totals: 22 passed, 1 failed, 0 skipped
  ********* Finished testing of tst_QQuickMultiPointTouchArea *********
  QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
  QtQA::App::TestRunner:   first attempt:  exited with exit code 3
  QtQA::App::TestRunner:   second attempt: exited with exit code 1
  QtQA::App::TestRunner: the test seems to be flaky, please fix this
  QtQA::App::TestRunner: this flaky test is being treated as a FAIL
  QtQA::App::TestRunner: end tst_qquickmultipointtoucharea: 11 seconds, exit code 1

  Build log: http://testresults.qt-project.org/ci/QtDeclarative_dev_Integration/build_01618/macx-clang_developer-build_OSX_10.8/log.txt.gz

  Tested changes (refs/builds/dev_1403699987):
    http://codereview.qt-project.org/87865 [PS9] - Add grabFramebuffer() to QQuickWidget and use it in the autotest