[Ci-reports] fail on QtBase_5.5_Integration #646

[Qt Continuous Integration System]

Autotest `tst_spdy' failed :(

The test was determined to be flaky, meaning results were not consistent across multiple runs.  This might make the problem difficult to reproduce.  Also, flaky failures might or might not be related to any recent changes in the source code.

  Testing tst_Spdy
  FAIL!  : tst_Spdy::download(mediumfile-socks-proxy) '!QTestEventLoop::instance().timeout()' returned FALSE. ()
  tst_spdy.cpp(272) : failure location
  FAIL!  : tst_Spdy::upload(4k+1-with-socks-proxy) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(4k+1-with-socks-proxy-auth) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(128k+1) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(2MB+1) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(multipart-3images) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  Totals: 33 passed, 6 failed, 0 skipped, 0 blacklisted
  QtQA::App::TestRunner: test failed, running again to see if it is flaky...
  ********* Start testing of tst_Spdy *********
  Config: Using QtTest library 5.5.0, Qt 5.5.0 (x86_64-little_endian-llp64 shared (dynamic) release build; by MSVC 2013)
  PASS   : tst_Spdy::initTestCase()
  PASS   : tst_Spdy::settingsAndNegotiation(default-settings)
  PASS   : tst_Spdy::settingsAndNegotiation(http-url)
  PASS   : tst_Spdy::settingsAndNegotiation(spdy-disabled)
  PASS   : tst_Spdy::settingsAndNegotiation(spdy-enabled)
  PASS   : tst_Spdy::download(mediumfile)
  PASS   : tst_Spdy::download(mediumfile-http-proxy)
  QWARN  : tst_Spdy::download(mediumfile-http-proxy-auth) QNativeSocketEngine::read() was called not in QAbstractSocket::ConnectedState or QAbstractSocket::BoundState
  PASS   : tst_Spdy::download(mediumfile-http-proxy-auth)
  PASS   : tst_Spdy::download(mediumfile-socks-proxy)
  FAIL!  : tst_Spdy::download(mediumfile-socks-proxy-auth) '!QTestEventLoop::instance().timeout()' returned FALSE. ()
  tst_spdy.cpp(272) : failure location
  QWARN  : tst_Spdy::download(bigfile) QNativeSocketEngine::read() was called not in QAbstractSocket::ConnectedState or QAbstractSocket::BoundState
  FAIL!  : tst_Spdy::download(bigfile) Compared values are not the same
     Actual   (finishedSpy.count()): 0
     Expected (1)                  : 1
  tst_spdy.cpp(276) : failure location
  PASS   : tst_Spdy::headerFields()
  FAIL!  : tst_Spdy::upload(empty) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(generic) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(small) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(with-nul) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(4k+1) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  PASS   : tst_Spdy::upload(4k+1-with-http-proxy)
  PASS   : tst_Spdy::upload(4k+1-with-http-proxy-auth)
  FAIL!  : tst_Spdy::upload(4k+1-with-socks-proxy) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(4k+1-with-socks-proxy-auth) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(128k+1) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(128k+1-put) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  FAIL!  : tst_Spdy::upload(2MB+1) Compared values are not the same
     Actual   (metaDataChangedSpy.count()): 0
     Expected (1)                         : 1
  tst_spdy.cpp(510) : failure location
  PASS   : tst_Spdy::upload(file-26K)
  PASS   : tst_Spdy::upload(file-1MB)
  PASS   : tst_Spdy::upload(multipart-3images)
  PASS   : tst_Spdy::errors(http-404)
  PASS   : tst_Spdy::errors(ssl-errors)
  PASS   : tst_Spdy::errors(host-not-found)
  PASS   : tst_Spdy::errors(proxy-not-found)
  PASS   : tst_Spdy::errors(proxy-unavailable)
  PASS   : tst_Spdy::errors(no-proxy-credentials)
  PASS   : tst_Spdy::multipleRequests(one-request)
  PASS   : tst_Spdy::multipleRequests(two-requests)
  PASS   : tst_Spdy::multipleRequests(ten-requests)
  PASS   : tst_Spdy::multipleRequests(twenty-requests)
  PASS   : tst_Spdy::multipleRequests(fifty-requests)
  PASS   : tst_Spdy::cleanupTestCase()
  Totals: 27 passed, 12 failed, 0 skipped, 0 blacklisted
  ********* Finished testing of tst_Spdy *********
  QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
  QtQA::App::TestRunner:   first attempt:  exited with exit code 6
  QtQA::App::TestRunner:   second attempt: exited with exit code 12
  QtQA::App::TestRunner: the test seems to be flaky, please fix this
  QtQA::App::TestRunner: this flaky test is being treated as a FAIL
  QtQA::App::TestRunner: end tst_spdy: 52 seconds, exit code 12

  Build log: http://testresults.qt.io/ci/QtBase_5.5_Integration/build_00646/win64-msvc2013_developer-build_qtnamespace_Windows_81/log.txt.gz

  Tested changes (refs/builds/5.5_1429158347):
    http://codereview.qt-project.org/45533 [PS23] - Implement a more direct headersclean check
    http://codereview.qt-project.org/110252 [PS2] - Optimize non-native bilinear transforms