[Ci-reports] fail on QtXmlPatterns_5.5_Integration #15
Qt Continuous Integration System
ci-noreply at qt-project.org
Fri May 8 11:46:45 CEST 2015
Autotests `tst_xmlpatternsschemats', `tst_xmlpatternsxqts', and `tst_xmlpatternsxslts' failed :(
Some (not all) of the tests were determined to be flaky, meaning results were not consistent across multiple runs. This might make the problem difficult to reproduce. Also, flaky failures might or might not be related to any recent changes in the source code.
Testing tst_XmlPatternsXSLTS
FAIL! : tst_XmlPatternsXSLTS::runTestSuite() 'ts' returned FALSE. (Failed to open the catalog, maybe it doesn't exist or is broken: The test suite catalog "C:/work/build/qt/qtxmlpatterns/tests/auto/xmlpatternsxslts/XSLTS/catalogResolved.xml" could not be found.
)
..\xmlpatternsxqts\tst_suitetest.cpp(89) : failure location
FAIL! : tst_XmlPatternsXSLTS::checkTestSuiteResult() 'i.exists()' returned FALSE. (File CandidateBaseline.xml does not exist.)
..\xmlpatternsxqts\tst_suitetest.cpp(129) : failure location
Totals: 2 passed, 2 failed, 0 skipped, 0 blacklisted
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_XmlPatternsXSLTS *********
Config: Using QtTest library 5.5.0, Qt 5.5.0 (i386-little_endian-ilp32 shared (dynamic) release build; by MSVC 2010)
PASS : tst_XmlPatternsXSLTS::initTestCase()
FAIL! : tst_XmlPatternsXSLTS::runTestSuite() 'ts' returned FALSE. (Failed to open the catalog, maybe it doesn't exist or is broken: The test suite catalog "C:/work/build/qt/qtxmlpatterns/tests/auto/xmlpatternsxslts/XSLTS/catalogResolved.xml" could not be found.
)
..\xmlpatternsxqts\tst_suitetest.cpp(89) : failure location
FAIL! : tst_XmlPatternsXSLTS::checkTestSuiteResult() 'i.exists()' returned FALSE. (File CandidateBaseline.xml does not exist.)
..\xmlpatternsxqts\tst_suitetest.cpp(129) : failure location
QWARN : tst_XmlPatternsXSLTS::checkTestSuiteResult() QThread: Destroyed while thread is still running
QWARN : tst_XmlPatternsXSLTS::checkTestSuiteResult() QMutex: destroying locked mutex
PASS : tst_XmlPatternsXSLTS::cleanupTestCase()
QtQA::App::TestRunner: Process exited with exit code 0xC0000005 (STATUS_ACCESS_VIOLATION)
QtQA::App::TestRunner: test failed on first and second attempts, but with different behavior each time:
QtQA::App::TestRunner: first attempt: exited with exit code 2
QtQA::App::TestRunner: second attempt: exited with exit code 3221225477
QtQA::App::TestRunner: the test seems to be flaky, please fix this
QtQA::App::TestRunner: this flaky test is being treated as a FAIL
QtQA::App::TestRunner: end tst_xmlpatternsxslts: 0.809421 seconds, exit code 3221225477
Testing tst_XmlPatternsXQTS
FAIL! : tst_XmlPatternsXQTS::runTestSuite() 'ts' returned FALSE. (Failed to open the catalog, maybe it doesn't exist or is broken: The specified test suite catalog "C:/work/build/qt/qtxmlpatterns/tests/auto/xmlpatternsxqts" is not a file. The test suite catalog must be a file, it cannot be a directory, for example.
)
tst_suitetest.cpp(89) : failure location
FAIL! : tst_XmlPatternsXQTS::checkTestSuiteResult() 'i.exists()' returned FALSE. (File CandidateBaseline.xml does not exist.)
tst_suitetest.cpp(129) : failure location
Totals: 2 passed, 2 failed, 0 skipped, 0 blacklisted
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_XmlPatternsXQTS *********
Config: Using QtTest library 5.5.0, Qt 5.5.0 (i386-little_endian-ilp32 shared (dynamic) release build; by MSVC 2010)
WARNING: tst_XmlPatternsXQTS::initTestCase() testdata TESTSUITE/XQTSCatalog.xml could not be located!
tst_xmlpatternsxqts.cpp(59) : failure location
PASS : tst_XmlPatternsXQTS::initTestCase()
FAIL! : tst_XmlPatternsXQTS::runTestSuite() 'ts' returned FALSE. (Failed to open the catalog, maybe it doesn't exist or is broken: The specified test suite catalog "C:/work/build/qt/qtxmlpatterns/tests/auto/xmlpatternsxqts" is not a file. The test suite catalog must be a file, it cannot be a directory, for example.
)
tst_suitetest.cpp(89) : failure location
FAIL! : tst_XmlPatternsXQTS::checkTestSuiteResult() 'i.exists()' returned FALSE. (File CandidateBaseline.xml does not exist.)
tst_suitetest.cpp(129) : failure location
QWARN : tst_XmlPatternsXQTS::checkTestSuiteResult() QThread: Destroyed while thread is still running
QWARN : tst_XmlPatternsXQTS::checkTestSuiteResult() QIODevice::read: WriteOnly device
PASS : tst_XmlPatternsXQTS::cleanupTestCase()
Totals: 2 passed, 2 failed, 0 skipped, 0 blacklisted
********* Finished testing of tst_XmlPatternsXQTS *********
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_xmlpatternsxqts: 0.794459 seconds, exit code 2
Testing tst_XmlPatternsSchemaTS
FAIL! : tst_XmlPatternsSchemaTS::runTestSuite() 'ts' returned FALSE. (Failed to open the catalog, maybe it doesn't exist or is broken: The test suite catalog "C:/work/build/qt/qtxmlpatterns/tests/auto/xmlpatternsschemats/TESTSUITE/testSuites.xml" could not be found.
)
..\xmlpatternsxqts\tst_suitetest.cpp(89) : failure location
FAIL! : tst_XmlPatternsSchemaTS::checkTestSuiteResult() 'i.exists()' returned FALSE. (File CandidateBaseline.xml does not exist.)
..\xmlpatternsxqts\tst_suitetest.cpp(129) : failure location
Totals: 2 passed, 2 failed, 0 skipped, 0 blacklisted
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_XmlPatternsSchemaTS *********
Config: Using QtTest library 5.5.0, Qt 5.5.0 (i386-little_endian-ilp32 shared (dynamic) release build; by MSVC 2010)
PASS : tst_XmlPatternsSchemaTS::initTestCase()
FAIL! : tst_XmlPatternsSchemaTS::runTestSuite() 'ts' returned FALSE. (Failed to open the catalog, maybe it doesn't exist or is broken: The test suite catalog "C:/work/build/qt/qtxmlpatterns/tests/auto/xmlpatternsschemats/TESTSUITE/testSuites.xml" could not be found.
)
..\xmlpatternsxqts\tst_suitetest.cpp(89) : failure location
FAIL! : tst_XmlPatternsSchemaTS::checkTestSuiteResult() 'i.exists()' returned FALSE. (File CandidateBaseline.xml does not exist.)
..\xmlpatternsxqts\tst_suitetest.cpp(129) : failure location
QWARN : tst_XmlPatternsSchemaTS::checkTestSuiteResult() QThread: Destroyed while thread is still running
QWARN : tst_XmlPatternsSchemaTS::checkTestSuiteResult() QIODevice::read: WriteOnly device
PASS : tst_XmlPatternsSchemaTS::cleanupTestCase()
Totals: 2 passed, 2 failed, 0 skipped, 0 blacklisted
********* Finished testing of tst_XmlPatternsSchemaTS *********
QtQA::App::TestRunner: test failure could be reproduced twice consecutively
QtQA::App::TestRunner: end tst_xmlpatternsschemats: 0.802494 seconds, exit code 2
Build log: http://testresults.qt.io/ci/QtXmlPatterns_5.5_Integration/build_00015/win32-msvc2010_developer-build_qtnamespace_Windows_7/log.txt.gz
Tested changes (refs/builds/5.5_1431076787):
http://codereview.qt-project.org/108569 [PS2] - Run tests unconditionally
More information about the Ci-reports
mailing list