[Development] Problem with qt5 stable release
Francisco Ortega
franciscoraulortega at gmail.com
Sun May 5 18:33:56 CEST 2013
Hi, I just run the qt 5 in 32 bit mode....
The way that I build for 32 bits and 64 bits was using the wiki.
I did git, init-repository, configure and then nmake
for nmake, I have to run it a few times, because sometimes I will get an
error that says that is a conflict, but at the end it runs fine... someone
in the #qt-labs, told me that just to keep running nmake. I will have to
run it again to let you know the error...
Same thing happened with 32 bits versions...
the configure was (out of memory)
configure -opensource -confirm-license -debug-and-release -nomake tests -mp
-opengl desktop -nomake webkit (maybe -nomake examples)
Both were the same... 32 bits seems to be ok as of now...
I will download a new qt in another directory, so I can report the bug for
the error that I'm referring that makes me do a few nmake.
as far as bat file you want me to run, I will do it in this new build...
but notice that I compiled the 64 bit in the 64 bit terminal... so all that
was already configured...
Thanks,
Francisco
Francisco R. Ortega
Ph.D. Candidate in Computer Science
Florida International University
http://www.FranciscoRaulOrtega.com
On Sun, May 5, 2013 at 12:21 PM, Andreas Holzammer <
andreas.holzammer at kdab.com> wrote:
> Am 05.05.2013 18:09, schrieb Francisco Ortega:
> > Thank you all. I know understand the mailing list betters.
> >
> > I did post a bug report
> > : https://bugreports.qt-project.org/browse/QTBUG-31004
> >
> > As far as the perl question, it says
> >
> > (C)>>where perl
> > C:\Perl\bin\perl.exe
> >
> > which the version is
> > (C)>>c:\perl\bin\perl.exe -v
> >
> > This is perl 5, version 16, subversion 2 (v5.16.2) built for
> > MSWin32-x86-multi-t
> > hread
> >
> > Yes, I'm using VS 2012 to compile. But I copy the moc command with its
> > arguments to tested it in the terminal to find the problem.
>
> Can you try to use nmake for building Qt? The configure should have
> generated a Makefile, which should be usable with nmake if you are in a
> visual studio 2012 x64 environment. I guess they start dropping to add
> shortcuts for this with the 2012 Version. Can you run
> "C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\vcvarsall.bat" x64
> prior to your configure call? and then nmake? Btw what is your configure
> line?
>
> Thank you
>
> Andy
>
> >
> > Thanks,
> > Francisco
> >
> >
> > Francisco R. Ortega
> > Ph.D. Candidate in Computer Science
> > Florida International University
> > http://www.FranciscoRaulOrtega.com
> >
> >
> > On Sun, May 5, 2013 at 12:02 PM, Andreas Holzammer
> > <andreas.holzammer at kdab.com <mailto:andreas.holzammer at kdab.com>> wrote:
> >
> > Francisco,
> >
> > you did not really describe what you did to compile Qt 5. Did you use
> > the command line or the Visual Studio IDE to build. But from your
> > description I figure that you are trying to use the IDE to build Qt.
> IT
> > could be that there is a bug. The preferred way is to use the command
> > line. Also do you have python and perl in your path in the command
> line?
> >
> > What does "where perl" state?
> >
> > Did you follow the wiki page I posted.
> >
> > Actual Bugs are posted into Jira bugreports.qt-project.org
> > <http://bugreports.qt-project.org>
> > And yes If you got problems compiling Qt, this belongs to
> > interest at qt-project.org <mailto:interest at qt-project.org>
> >
> > Thanks
> >
> > Andy
> >
> >
> > Am 05.05.2013 17:52, schrieb Francisco Ortega:
> > > Andreas,
> > >
> > > Thank you for the email. Which is the correct mailing list. I
> think I
> > > found a bug with MOC . I have more information.
> > >
> > > You are saying that interest is where problems or bugs should be
> sent?
> > >
> > > Francisco R. Ortega
> > > Ph.D. Candidate in Computer Science
> > > Florida International University
> > > http://www.FranciscoRaulOrtega.com
> > >
> > >
> > > On Sun, May 5, 2013 at 11:47 AM, Andreas Holzammer
> > > <andreas.holzammer at kdab.com <mailto:andreas.holzammer at kdab.com>
> > <mailto:andreas.holzammer at kdab.com
> > <mailto:andreas.holzammer at kdab.com>>> wrote:
> > >
> > > Hi Francisco,
> > >
> > > this is not the right mailing list. The developing mailing
> list is
> > > taking care of Qt development and not howto compile Qt. Please
> > use the
> > > interest mailing list. Also did you follow the wiki page on
> > how to build
> > > Qt 5 from git[1]?
> > >
> > > Thank you
> > >
> > > Andy
> > >
> > >
> > > [1] http://qt-project.org/wiki/Building_Qt_5_from_Git
> > >
> > > Am 05.05.2013 17:38, schrieb Francisco Ortega:
> > > > [SORRY FOR DUAL POSTING --- Hit send by mistake]
> > > > Hi,
> > > >
> > > > I have downloaded qt5 with git , stable release.
> > > >
> > > > I have compiled that for Windows 7 64 bits, for 64 bits
> > (debug and
> > > > release) for visual studio 2012 with OpenGL Desktop (in the
> > configure)
> > > >
> > > > I created an empty project with the wizard, with QT CORE, QT
> > GUI, QT
> > > > OPENGL ...
> > > >
> > > > However, the moc is not created.
> > > >
> > > > Is this a known issue? has anyone run into this problem?
> > > >
> > > > Here is the code of MOC
> > > >
> > > > "$(QTDIR)\bin\moc.exe" "%(FullPath)" -o
> > > > ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp"
> > -DUNICODE
> > > > -DWIN32 -DQT_DLL -DQT_CORE_LIB -DQT_GUI_LIB -DQT_OPENGL_LIB
> > > > -DQT_WIDGETS_LIB "-I.\GeneratedFiles" "-I."
> "-I$(QTDIR)\include"
> > > > "-I.\GeneratedFiles\$(ConfigurationName)\."
> > > "-I$(QTDIR)\include\QtCore"
> > > > "-I$(QTDIR)\include\QtGui" "-I$(QTDIR)\include\QtOpenGL"
> > > > "-I$(QTDIR)\include\QtWidgets"
> > > >
> > > > which translate to
> > > >
> > > > "C:\Qt\qt5\qt5x64\qtbase\bin\moc.exe"
> > > >
> > "C:\DSPLAB_ORTEGA\QTApp\QTGLANAV2013\QTGLANAV2013\qtglanav2013.h" -o
> > > > ".\GeneratedFiles\Debug\moc_qtglanav2013.cpp" -DUNICODE
> -DWIN32
> > > > -DQT_DLL -DQT_CORE_LIB -DQT_GUI_LIB -DQT_OPENGL_LIB
> > -DQT_WIDGETS_LIB
> > > > "-I.\GeneratedFiles" "-I."
> "-IC:\Qt\qt5\qt5x64\qtbase\include"
> > > > "-I.\GeneratedFiles\Debug\."
> > > "-IC:\Qt\qt5\qt5x64\qtbase\include\QtCore"
> > > > "-IC:\Qt\qt5\qt5x64\qtbase\include\QtGui"
> > > > "-IC:\Qt\qt5\qt5x64\qtbase\include\QtOpenGL"
> > > > "-IC:\Qt\qt5\qt5x64\qtbase\include\QtWidgets"
> > > >
> > > >
> > > > it doesn't work, even if I change the output location or
> > name. But If
> > > > omit the output, it generated the output in the terminal.
> > > >
> > > > Please help. I'm trying to get vs 2012 with qt working for
> > 64 bits for
> > > > Windows 7.
> > > >
> > > > Thanks,
> > > > Francisco
> > > >
> > > > Francisco R. Ortega
> > > > Ph.D. Candidate in Computer Science
> > > > Florida International University
> > > > http://www.FranciscoRaulOrtega.com
> > > >
> > > >
> > > > On Sun, May 5, 2013 at 11:37 AM, Francisco Ortega
> > > > <franciscoraulortega at gmail.com
> > <mailto:franciscoraulortega at gmail.com>
> > > <mailto:franciscoraulortega at gmail.com
> > <mailto:franciscoraulortega at gmail.com>>
> > > <mailto:franciscoraulortega at gmail.com
> > <mailto:franciscoraulortega at gmail.com>
> > > <mailto:franciscoraulortega at gmail.com
> > <mailto:franciscoraulortega at gmail.com>>>>
> > > > wrote:
> > > >
> > > > Hi,
> > > >
> > > > I have downloaded qt5 with git , stable release.
> > > >
> > > > I have compiled that for Windows 7 64 bits, for 64 bits
> > (debug and
> > > > release) for visual studio 2012 with OpenGL Desktop (in
> the
> > > configure)
> > > >
> > > > I created an empty project with the wizard, with QT
> CORE, QT
> > > GUI, QT
> > > > OPENGL ...
> > > >
> > > > However, the moc is not created.
> > > >
> > > > Is this a known issue? has anyone run into this problem?
> > > >
> > > > Here is the code of MOC :
> > > >
> > > > Francisco R. Ortega
> > > > Ph.D. Candidate in Computer Science
> > > > Florida International University
> > > > http://www.FranciscoRaulOrtega.com
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Development mailing list
> > > > Development at qt-project.org
> > <mailto:Development at qt-project.org>
> > <mailto:Development at qt-project.org <mailto:
> Development at qt-project.org>>
> > > > http://lists.qt-project.org/mailman/listinfo/development
> > > >
> > >
> > >
> > > --
> > > Andreas Holzammer | andreas.holzammer at kdab.com
> > <mailto:andreas.holzammer at kdab.com>
> > > <mailto:andreas.holzammer at kdab.com
> > <mailto:andreas.holzammer at kdab.com>> | Software Engineer
> > > KDAB (Deutschland) GmbH&Co KG, a KDAB Group company
> > > Tel. Germany +49-30-521325470 <tel:%2B49-30-521325470>
> > <tel:%2B49-30-521325470>, Sweden (HQ)
> > > +46-563-540090 <tel:%2B46-563-540090> <tel:%2B46-563-540090>
> > > KDAB - Qt Experts - Platform-independent software solutions
> > >
> > >
> >
> >
> > --
> > Andreas Holzammer | andreas.holzammer at kdab.com
> > <mailto:andreas.holzammer at kdab.com> | Software Engineer
> > KDAB (Deutschland) GmbH&Co KG, a KDAB Group company
> > Tel. Germany +49-30-521325470 <tel:%2B49-30-521325470>, Sweden (HQ)
> > +46-563-540090 <tel:%2B46-563-540090>
> > KDAB - Qt Experts - Platform-independent software solutions
> >
> >
>
>
> --
> Andreas Holzammer | andreas.holzammer at kdab.com | Software Engineer
> KDAB (Deutschland) GmbH&Co KG, a KDAB Group company
> Tel. Germany +49-30-521325470, Sweden (HQ) +46-563-540090
> KDAB - Qt Experts - Platform-independent software solutions
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/development/attachments/20130505/4874beeb/attachment.html>
More information about the Development
mailing list