[Development] [QML] Avoiding graphics flicker in Quick2
Denis Shienkov
denis.shienkov at gmail.com
Fri Aug 5 13:53:29 CEST 2016
> I suggested to use an OpenGL example
Pure Open GL example does not work at all (e.g. I tried Cube example).. I
see only a black screen, and some of OpenGL textures errors.
PS: I have crerated a bug https://bugreports.qt.io/browse/QTBUG-55162 (just
in case)
2016-08-05 14:39 GMT+03:00 Sean Harmer <sean.harmer at kdab.com>:
> I suggested to use an OpenGL example, not a Qt Quick one. We're trying to
> isolate where the issue is in the stack. So use a single threaded, plain
> OpenGL application with a 32 bit framebuffer and see if that gives the same
> issue.
>
> Cheers,
>
> Sean
>
> On Friday 05 August 2016 14:22:00 Denis Shienkov wrote:
> > So, I have compiled the standard Samehame QMML application from:
> >
> > /home/builder/Projects/qt5/qtdeclarative/examples/quick/demos/samegame/
> >
> > and got same artifacts when I use RDBA=8888 mode.
> >
> > I have "screenshoot" of this flicking attifact:
> > http://pasteboard.co/4XjMl3GNq.png
> >
> > I'm personally don't think that this is an NVidia's OpenGL ES2 bug... I
> > think it is Qt bug...
> >
> > I'm not an OpenGL expert... so, can anybody point me what I need to do
> with
> > the Qt sources (where to look in)?
> >
> > Maybe I need to add some of gl_ functions to clear of content or
> something
> > else... but where?
> >
> > 2016-08-05 12:03 GMT+03:00 Sean Harmer <sean.harmer at kdab.com>:
> > > On Friday 05 August 2016 12:02:10 Denis Shienkov wrote:
> > > > > Can you try a plain OpenGL test application with RGBA8 framebuffer
> > > >
> > > > Do you mean: I should take any OpenGL application from the Qt
> examples?
> > >
> > > And
> > >
> > > > to check there?
> > >
> > > You may need to modify it to explicitly request R8G8B8A8 using a
> > > QSurfaceFormat but yes any of those should work to prove/disprove.
> > >
> > > Sean
> > >
> > > > 2016-08-05 11:53 GMT+03:00 Sean Harmer <sean.harmer at kdab.com>:
> > > > > Hi,
> > > > >
> > > > > Can you try a plain OpenGL test application with RGBA8 framebuffer
> and
> > >
> > > see
> > >
> > > > > if
> > > > > that exhibits the same flashing/flickering problem. If so, it's a
> > > > > driver/hardware issue.
> > > > >
> > > > > If you are forced into then using a 16-bit framebuffer, then you
> can
> > >
> > > avoid
> > >
> > > > > the
> > > > > banding by using dithering in your gradients. Either apply the
> > >
> > > dithering
> > >
> > > > > offline
> > > > > and store the gradients as images or write a custom material that
> > >
> > > applies
> > >
> > > > > the
> > > > > dithering in the fragment shader.
> > > > >
> > > > > Cheers,
> > > > >
> > > > > Sean
> > > > >
> > > > > On Friday 05 August 2016 08:12:59 Denis Shienkov wrote:
> > > > > > Hi all,
> > > > > >
> > > > > > I have an idea how to avoid flickering, but I don't know about
> > >
> > > results:
> > > > > > what if I will discard the Open GL support in favor to Quick2
> > > > > > render?
> > > > > >
> > > > > > I have read this documentation: http://doc.qt.io/
> QtQuick2DRenderer/
> > > > > > which says about the "Qt Quick 2D Renderer" module.
> > > > > >
> > > > > > So, my things is:
> > > > > >
> > > > > > 1. Download && build && install this module:
> > > > > >
> > > > > > git://code.qt.io/qt/qtdeclarative-render2d.git
> > > > > >
> > > > > > 2. Use this env variable:
> > > > > >
> > > > > > export QMLSCENE_DEVICE=softwarecontext
> > > > > >
> > > > > > 3. Run my app...
> > > > > >
> > > > > >
> > > > > > But, I don't understand:
> > > > > >
> > > > > > 1) What of engine is used to 2D rendering in case if I have EGLFS
> > >
> > > only?
> > >
> > > > > > 2) Should I re-build Qt5 too with the "--no-opengl" option (or I
> can
> > > > > > keep the "-opengl es2" option) ?
> > > > > >
> > > > > > 04.08.2016 16:10, Denis Shienkov пишет:
> > > > > > > Hi Robin,
> > > > > > >
> > > > > > > > Repeating my last answer...
> > > > > > > > http://lists.qt-project.org/pipermail/development/2016-> >
> > > > >
> > > > > July/026736.html
> > > > >
> > > > > > > I'm sorry, but I did not receive (did not see) your last
> answer.
> > > > > > >
> > > > > > > > I'm going to guess you're using eglfs or something like that
> > > > > > >
> > > > > > > Yes, I use EGLFS via X11 on Linux Apalis T30 board, where are
> used
> > > > > > > NVIDIA's drivers.
> > > > > > >
> > > > > > > Seems, the flickering is when are used:
> > > > > > >
> > > > > > > export QT_QPA_EGLFS_FORCE888=1
> > > > > > >
> > > > > > > ENV variable... (I need this variable to smooth the Image's
> > > > > > > gradients... even X11 started with 24-bit depth).
> > > > > > >
> > > > > > > PS: But, I'm not sure about QT_QPA_EGLFS_FORCE888... :(
> > > > > > >
> > > > > > > > Using an overlay to debug item positions
> > > > > > > > (QSG_VISUALIZE=overdraw)
> > > > > > >
> > > > > > > could be handy for trying to rule
> > > > > > > this out, as if it is specific to the application,
> > > > > > >
> > > > > > > Ok, many thanks, I will try it.
> > > > > > >
> > > > > > >
> > > > > > > 2016-08-04 14:57 GMT+03:00 Robin Burchell <
> robin+qt at viroteck.net
> > > > > > >
> > > > > > > <mailto:robin+qt at viroteck.net>>:
> > > > > > > Repeating my last answer...
> > > > > > >
> > > > > > > http://lists.qt-project.org/pipermail/development/2016-> >
> > > > >
> > > > > July/026736.htm
> > > > >
> > > > > > > l
> > > > > > >
> > > > > > > On Thu, Aug 4, 2016, at 01:50 PM, Denis Shienkov wrote:
> > > > > > > > {quote}
> > > > > > > >
> > > > > > > > Hi all.
> > > > > > > >
> > > > > > > > I have some QML application, where just use QQuickView as
> > > > > > > > QML
> > > > > > >
> > > > > > > container.
> > > > > > >
> > > > > > > > This application uses Qt 5.7.x and running on Linux
> embedded
> > > > > > >
> > > > > > > board with
> > > > > > >
> > > > > > > > the
> > > > > > > > NVIDIA core (Toradex Apalis T30).
> > > > > > > >
> > > > > > > > But sometimes I got flickering in process of animation. A
> > > > >
> > > > > flickering
> > > > >
> > > > > > > > represents in form of a "white" strips with full-screen
> > > > > > > > width
> > > > > > >
> > > > > > > and 1/5-1/6
> > > > > > >
> > > > > > > > screen heigth. This flickers happens quickly and
> frequently
> > > > > > >
> > > > > > > (every ~20-60
> > > > > > >
> > > > > > > > seconds, randomly)...
> > > > > > > >
> > > > > > > > I have seen this "Avoiding graphics flicker in Qt / QML"
> [1]
> > > > > > >
> > > > > > > blog where
> > > > > > >
> > > > > > > > are
> > > > > > > > used QML with Qt 4.x,
> > > > > > > > where were used this trics:
> > > > > > > >
> > > > > > > > {code}
> > > > > > > > int main(int argc, char **argv)
> > > > > > > > {
> > > > > > > >
> > > > > > > > ...
> > > > > > > >
> > > > > > > > view.setAttribute(Qt::WA_OpaquePaintEvent);
> > > > > > > > view.setAttribute(Qt::WA_NoSystemBackground);
> > > > > > > > view.viewport()->setAttribute(Qt::WA_OpaquePaintEvent);
> > > > > > > > view.viewport()->setAttribute(
> Qt::WA_NoSystemBackground);
> > > > > > > >
> > > > > > > > ...
> > > > > > > >
> > > > > > > > }
> > > > > > > > {code}
> > > > > > > >
> > > > > > > > But, in my case I have use Quick v2, with QQuickView
> instead
> > >
> > > of
> > >
> > > > > > > > QDeclarativeView,
> > > > > > > > which does not allowed to setup any attributes.
> > > > > > > >
> > > > > > > > So, my questions is: is there are any way to setup
> > > > > > > > Qt::WA_OpaquePaintEvent
> > > > > > > > and/or
> > > > > > > > Qt::WA_NoSystemBackground in Quck2? Or, maybe is it
> possible
> > >
> > > to
> > >
> > > > > use
> > > > >
> > > > > > > > another
> > > > > > > > tricks?
> > > > > > > >
> > > > > > > > BR,
> > > > > > > > Denis
> > > > > > >
> > > > > > > [1]https://blog.rburchell.com/2011/11/avoiding-graphics->
> >
> > > > >
> > > > > flicker-in-qt-> > qml.html>
> > > > >
> > > > > > > > {quote}
> > > > > > > >
> > > > > > > > This flickering present on some HDMI displays...
> > > > > > > >
> > > > > > > > We currently have this flags:
> > > > > > > >
> > > > > > > > {code}
> > > > > > > > ...
> > > > > > > > view.setFlags(Qt::FramelessWindowHint |
> > > > >
> > > > > Qt::WindowStaysOnTopHint);
> > > > >
> > > > > > > > ...
> > > > > > > > {code}
> > > > > > > >
> > > > > > > > Maybe is it an reasons of flikering? Has someone any
> ideas?
> > > > > > > >
> > > > > > > > BR,
> > > > > > > > Denis
> > > > > > > > _______________________________________________
> > > > > > > > Development mailing list
> > > > > > > > Development at qt-project.org <mailto:Development at qt-
> > >
> > > project.org>
> > >
> > > > > > > > http://lists.qt-project.org/mailman/listinfo/development
> > > > >
> > > > > --
> > > > > Dr Sean Harmer | sean.harmer at kdab.com | Managing Director UK
> > > > > KDAB (UK) Ltd, a KDAB Group company
> > > > > Tel. +44 (0)1625 809908; Sweden (HQ) +46-563-540090
> > > > > Mobile: +44 (0)7545 140604
> > > > > KDAB - Qt Experts
> > > > > _______________________________________________
> > > > > Development mailing list
> > > > > Development at qt-project.org
> > > > > http://lists.qt-project.org/mailman/listinfo/development
> > >
> > > --
> > > Dr Sean Harmer | sean.harmer at kdab.com | Managing Director UK
> > > KDAB (UK) Ltd, a KDAB Group company
> > > Tel. +44 (0)1625 809908; Sweden (HQ) +46-563-540090
> > > Mobile: +44 (0)7545 140604
> > > KDAB - Qt Experts
>
> --
> Dr Sean Harmer | sean.harmer at kdab.com | Managing Director UK
> KDAB (UK) Ltd, a KDAB Group company
> Tel. +44 (0)1625 809908; Sweden (HQ) +46-563-540090
> Mobile: +44 (0)7545 140604
> KDAB - Qt Experts
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/development/attachments/20160805/f6113a53/attachment.html>
More information about the Development
mailing list