[Development] Is Qt for Automation available under GPLv3?

[Frank Meerkötter]

Hi,

I would like to point out that Qt OPC UA, which is part of Qt for 
Automation, can also be built with an LGPLv3 license as long as the 
open62541 backend is used.

Regards,
Frank

Am 08.06.2018 um 07:50 schrieb Alex Blasche:
> Hi,
>
> There are no binaries for open source users. However open source users are free to build their own binaries using GPLv3.
>
> --
> Alex
>
> ________________________________________
> From: Development <development-bounces+alexander.blasche=qt.io at qt-project.org> on behalf of Sze Howe Koh <szehowe.koh at gmail.com>
> Sent: Thursday, 7 June 2018 3:48:53 PM
> To: Qt development mailing list
> Subject: [Development] Is Qt for Automation available under GPLv3?
>
> Hello,
>
> According to http://doc.qt.io/QtForAutomation/qtautomation-install.html
> Qt for Automation is available under GPLv3. However, the installation
> instructions are not valid for open-source users. Furthermore, that
> page also says that Qt for Automation is built on Qt for Device
> Creation, which is commercial-only.
>
> Users are confused by that page:
> * https://forum.qt.io/topic/91042/how-to-install-qt-for-automation
> * https://forum.qt.io/topic/91439/no-option-to-install-qt-for-automation-in-the-online-installer
>
> Please resolve.
>
>
> Regards,
> Sze-Howe
> _______________________________________________
> Development mailing list
> Development at qt-project.org
> http://lists.qt-project.org/mailman/listinfo/development
> _______________________________________________
> Development mailing list
> Development at qt-project.org
> http://lists.qt-project.org/mailman/listinfo/development

-- 
Frank Meerkötter
Development Lead
  
basysKom GmbH
Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany
Tel   : +49 6151 870 589 161  | Fax: +49 6151 - 870 589 162
frank.meerkoetter at basyskom.com | www.basyskom.com

Handelsregister: Darmstadt HRB 9352
Geschäftsführung: Heike Ziegler