[Development] Qt 6 not seeing the same DPI as Qt 5

[Ahmad Samir]

On 29/11/21 18:41, Thiago Macieira wrote:
> I'll probably have to report this as a bug, but just in case someone has seen
> it before:
> 
> $ diff -u qtdiag5 qtdiag6
> [...]
>     Geometry: 1920x1200+0+0 (native: 3840x2400+0+0) Available: 1920x1200+0+0
>     Virtual geometry: 5760x1200+0+0 Available: 5760x1200+0+0
>     2 virtual siblings
> -  Physical size: 288x180 mm  Refresh: 59.9939 Hz Power state: 0
> -  Physical DPI: 169.333,169.333 Logical DPI: 120.118,120 (native:
> 240.236,240) Subpixel_None
> +  Physical size: 406x228.6 mm  Refresh: 29.9806 Hz Power state: 0
> +  Physical DPI: 120.118,120 Logical DPI: 96,96 Subpixel_None
>     High DPI scaling factor: 2 DevicePixelRatio: 2
> 

Do the - and + lines represent the same monitor? one says refresh rate is ~60Hz, the other says ~30Hz.

[...]
-- 
Ahmad Samir