[Interest] Build webkit with QT for Embedded Linux!

Lata Agrawal lata.agrawal at enrouteinc.com
Fri May 18 14:26:51 CEST 2012


I pointed my webkit browser
http://www.barackobama.cm/life-of-julia<http://www.barackobama.com/life-of-julia>.
When I execute cross-compiled app on Embedded device, it doesn't display
anything but on Linux-x86, it loads fine.
If you don't mind, can you send me the configure command you are using and
also which gcc version you are using to cross-compile.

Do you find anything wrong in the configure command I am using?

-Lata

On 18 May 2012 17:48, Mandeep Sandhu <mandeepsandhu.chd at gmail.com> wrote:

> On Fri, May 18, 2012 at 5:10 PM, Lata Agrawal
> <lata.agrawal at enrouteinc.com> wrote:
> > Do I need to build it in release it by explicitly using -release switch?
>
> It'll be better to build it in release mode unless you're planning to
> debug the Qt itself. It'll also reduce the size of the built libraries
> by a good amount. This is important especially on embedded boards
> which have slower processors.
>
> We too are running Qt 4.6.2 on an embedded MIPS board and webkit works
> fine while rendering webpages. BTW, what specific HTML5 tag is being
> used in your test HTML5 page?
>
> You can run a test of what all HTML5 tags are supported by your
> QtWebkit by pointing your browser to www.html5test.com.
>
> HTH,
> -mandeep
>
> >
> > -Lata
> >
> >
> > On 18 May 2012 16:57, Lata Agrawal <lata.agrawal at enrouteinc.com> wrote:
> >>
> >> Hi Mandeep,
> >>
> >> Thanks for replying. I am simple interactive web pages, no video or
> audio.
> >> App works fine on Linux-x86 but same app when cross-compiled for
> Linux/MIPS
> >> doesn't show anything at all on screen. Do I need to add any feature
> while
> >> cross-compiling QT to be able to load HTML5 pages using Qtwebkit?
> >>
> >> Regards,
> >> Lata
> >>
> >>
> >> On 18 May 2012 16:52, Mandeep Sandhu <mandeepsandhu.chd at gmail.com>
> wrote:
> >>>
> >>> > I want to display HTML5 pages using QTWebkit module. I am able to
> >>> > execute
> >>> > the webkit application on Linux-x86 and it loads the HTML5 page
> >>> > perfectly
> >>> > fine. But when I cross-compile the same application for Linux/MIPS
> >>> > device
> >>> > and execute the app on device, it doesn't show anything.
> >>>
> >>> What sort of content is being shown n this web-page? Does it load
> >>> anything at all?
> >>>
> >>> Does the page having audio/video tags? If so, then that part won't
> >>> work since that depends on phonon and you have disabled it in your
> >>> build.
> >>>
> >>> -mandeep
> >>
> >>
> >>
> >>
> >> --
> >>
> >> Lata Agrawal
> >> 9699750643
> >> En Route Media Pvt. Ltd.
> >>
> >> En Route are the winners of the E4M OOH Award for Innovative Creation
> of a
> >> New Medium
> >>
> >>
> >
> >
> >
> > --
> >
> > Lata Agrawal
> > 9699750643
> > En Route Media Pvt. Ltd.
> >
> > En Route are the winners of the E4M OOH Award for Innovative Creation of
> a
> > New Medium
> >
> >
>



-- 
*
*Lata Agrawal
9699750643
En Route Media Pvt. Ltd.

*En Route are the winners of the E4M OOH Award for Innovative Creation of a
New Medium*
*                                 *
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/interest/attachments/20120518/f940604c/attachment.html>


More information about the Interest mailing list