[Interest] Network configuration from qt under linux

[nate.yuan at gmail.com]

If your system can be customized, that will be easy.
Install NetworkManager on your system.
And use dbus to communicate with the NetworkManager daemon.



At 2013-11-10 05:26:35,Simone <cjb.sw.nospam at gmail.com> wrote:
>Hello,
>We developed an application that need to configure all the network configurations from our GUI.
>We must let the end user be able to configure the device network configuration from a user friendly interface, without doing it by command line :-)
>
>Now, I have googled a bit but seems that qt don't support this, could you confirm it?
>There is an alternative solution to do this?
>
>Our system is based on an ARM cpu, and linux embedded (v2.6.35.3).
>The parameters we want to be able to change are
>- DHCP or STATIC mode
>- IP addr.
>- SUBNET
>- DNS
>- GATEWAY
>
>Does someone have any suggestion?
>Thanks so much
>Simone
>
>_______________________________________________
>Interest mailing list
>Interest at qt-project.org
>http://lists.qt-project.org/mailman/listinfo/interest
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/interest/attachments/20131110/cb237a9b/attachment.html>