[Interest] FW: QProcess wrap the telnet.exe

[Joseph W. Joshua]

On 11/14/2013 6:25 AM, ZHONG Zhu wrote:
> Hi Scott,
>
> Attached our sample code. Could you check if it works on your Windows
> PC? Thanks!
>
> We just can’t get it work.
>
> BR,
>
> Zhu
>
> *From:*interest-bounces+zhu.zhong=alcatel-sbell.com.cn at qt-project.org
> <mailto:interest-bounces+zhu.zhong=alcatel-sbell.com.cn at qt-project.org>
> [mailto:interest-bounces+zhu.zhong=alcatel-sbell.com.cn at qt-project.org]
> *On Behalf Of *Scott Aron Bloom
> *Sent:* 2013年11月14日11:01
> *To:* qt-interest (interest at qt-project.org <mailto:interest at qt-project.org>)
> *Subject:* Re: [Interest] QProcess wrap the telnet.exe
>
> What is not working?
>
> Can you call telnet.exe?  or is it waiting for stdin data in order to go?
>
> What argumetns are you using?
>
> Is the process starting (Connect to the appropriate slots to see)
>
>
> Scott
>
> *From:*GUO Qiang A [mailto:Qiang.a.Guo at alcatel-sbell.com.cn]
> *Sent:* Wednesday, November 13, 2013 6:58 PM
> *To:* Scott Aron Bloom; qt-interest (interest at qt-project.org
> <mailto:interest at qt-project.org>)
> *Cc:* ZHONG Zhu
> *Subject:* RE: QProcess wrap the telnet.exe
>
> Hi Scott,
>
> I just use the same code.
>
> It works for cmd.exe, but it can’t work in windows with telnet.exe.
>
> Do you have other suggestions?
>
> Thanks.
>
> *From:*Scott Aron Bloom [mailto:scott.bloom at onshorecs.com]
> *Sent:* 2013年11月14日10:48
> *To:* GUO Qiang A; qt-interest (interest at qt-project.org
> <mailto:interest at qt-project.org>)
> *Cc:* ZHONG Zhu
> *Subject:* RE: QProcess wrap the telnet.exe
>
> Please don’t respond privately…
>
>
> I connect to
>
> connect( process, SIGNAL( readyReadStandardError() ), this, SLOT(
> slotProcessReadyReadStdErr() ) );
>
> connect( process, SIGNAL( readyReadStandardOutput() ), this, SLOT(
> slotProcessReadyReadStdOut() ) );
>
> Then a simple
>
> QByteArray txt = process->readAllStandardOutput();
>
> In the slots should have you covered
>
> I use process->start( execName, args ) to start her up.
>
>
> Scott
>
> *From:*GUO Qiang A [mailto:Qiang.a.Guo at alcatel-sbell.com.cn]
> *Sent:* Wednesday, November 13, 2013 6:46 PM
> *To:* Scott Aron Bloom
> *Cc:* ZHONG Zhu
> *Subject:* QProcess wrap the telnet.exe
>
> Hi Scott,
>
> Can you show me how to use pipes?
>
> I have connected the readyReadStandardOutput and readyReadStandardError
> signals but it can’t work.
>
> thanks.
>
> -----Original Message-----
>
> From: interest-bounces+zhu.zhong=alcatel-sbell.com.cn at qt-project.org
> <mailto:interest-bounces+zhu.zhong=alcatel-sbell.com.cn at qt-project.org>
> [mailto:interest-bounces+zhu.zhong=alcatel-sbell.com.cn at qt-project.org]
> On Behalf Of Scott Aron Bloom
>
> Sent: 2013年11月13日15:26
>
> To: Qt Project MailingList
>
> Subject: Re: [Interest] Expect for Qt?
>
> QProcess works fine for telnet and ftp, you need to connect the input
> and output pipes in order to send data into it.
>
> Scott
>
> Best Regards,
>
> Qiang Guo
>
> *EasyTest*(Alcatel-Lucent automation test tool) NOW *FREE**on internet*at
>
> *https://github.com/EasyTestTeam/EasyTest*
>
>
>
> _______________________________________________
> Interest mailing list
> Interest at qt-project.org
> http://lists.qt-project.org/mailman/listinfo/interest
>
Hi Zhu,

In your code, you are trying to launch *telent.exe* instead of 
*telnet.exe*.  Is this intented, or is it a typing error?

Josh