[Interest] BLE : Bonding and ble security
Simon FEUTRIER
sfeutrier at bluegriot.com
Mon Aug 17 16:31:41 CEST 2020
Alex, thank you for your quick reply. I just tried with the pre-release
5.15.1 and this is the same behavior.
When trying to activate notification (first write to characteristic that I
do), it always fails to write. Qt still never initiates the bonding.
Could you clearly tell me if it is supposed to work or if this has not been
implemented yet ?
Jérôme, thank you for your message, sorry I forgot to specify I am working
with Windows 10 with MSVC. I'm sure your message will be helpful but I
don't think it applies to my case.
Best regards,
Simon Feutrier
Le lun. 17 août 2020 à 15:52, Jérôme Godbout <godboutj at amotus.ca> a écrit :
> Here is my error code I’m currently using:
>
>
>
> switch (error)
>
> {
>
> case QLowEnergyController::Error::AdvertisingError:
>
> case QLowEnergyController::Error::UnknownRemoteDeviceError:
>
> case QLowEnergyController::Error::UnknownError:
>
> case QLowEnergyController::Error::InvalidBluetoothAdapterError:
>
> case QLowEnergyController::Error::NetworkError:
>
> case QLowEnergyController::Error::ConnectionError:
>
> #if QT_VERSION >= QT_VERSION_CHECK(5, 10, 0)
>
> case QLowEnergyController::Error::RemoteHostClosedError:
>
> #endif
>
> #if QT_VERSION >= QT_VERSION_CHECK(5, 14, 0)
>
> case QLowEnergyController::Error::AuthorizationError:
>
> #endif
>
> break;
>
> // Code 0x22 (0d34) seem to be link to unsupported Read
> Characteristic on device the read timeout, missing read/write connect on
> service?
>
> // Android problem: BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT
>
> case 0x22:
>
> qDebug() << "Android Device have problem
> BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT or GATT CONN LMP TIMEOUT: " <<
> error;
>
> // TODO godboutj 2018-06-11, find a fix or a workaround this
> issue
>
> break;
>
> // Special erro 129 QLowEnergyController Error is Generic Android
> internal error. Often just disconnecting and reconnecting help the issue
>
> case 0x81: // (0d129)
>
> qDebug() << "Android generic error, disconnect and try to
> reconnect again";
>
> break;
>
> // Special erro 133 GATT_ERROR, seen on Samsung Android 8 tablet,
> reason can be almost anything
>
> case 0x85: // (0d133)
>
> qDebug() << "Android device error, not sure about why we get
> this on some device";
>
> break;
>
> // More code explaination can be found here:
> http://allmydroids.blogspot.com/2015/06/android-ble-error-status-codes-explained.html
>
> default:
>
> qDebug() << "UnhandledError: " << error;
>
> break;
>
> }
>
>
>
> If that might help others developing with Android. This will generate some
> warning for bad enum value, but they are showing up on Android… If someone
> have information about those error, I will gladly be accepting any
> information about why they can occur.
>
>
>
>
>
> *From:* Interest <interest-bounces at qt-project.org> *On Behalf Of *Jérôme
> Godbout
> *Sent:* August 17, 2020 9:25 AM
> *To:* Simon FEUTRIER <sfeutrier at bluegriot.com>; interest at qt-project.org
> *Subject:* Re: [Interest] BLE : Bonding and ble security
>
>
>
> Hi,
>
> If you are using Qt and Android for the application. I did found over time
> to have a reliable behavior with Android connection step, you kind of need
> to slow things down on Android platform (this doesn’t apply to Windows,
> Mac, iOS). I delayed my task by 500 ms after connecting and doing anything
> (services discovery, pairing, authenticate… under Android. Also do this
> when I disconnect (garbage collector issue?!) and avoid reconnecting too
> quickly. This have solve many problems I had under Android. Android
> Bluetooth LE stack is really bad before Android 8. If you can, try to make
> things work with a recent device and Android 8+, then patch the behavior
> for older device if you can.
>
>
>
> I also found that a few manufacturer have more issue (but this might just
> be a specific product, I don’t have enough data to make sure this is
> happening all the time):
>
> - Google Nexus 7", Android 6.0.1 can raise undocumented Error 34
> (0x22) GATT CONN LMP TIMEOUT
> - LG K4 LTE, Android 5.1.1 Debugger doesn’t run too well
> - Lenovo (cheap tablet, I don’t remember the actual model #) the
> advertising is a big mess (some low level filtering, making beacon
> continuous discovery impossible).
> - Samsung many older version had some debugger issue (missing or
> renamed tools)
>
>
>
> If you Android BLE start behaving heraldically, turn off the BLE and wait
> at least 20s before activating again. Seem like the garbage collector/clean
> up task is fairly slow.
>
>
>
> Hope this might help you.
>
> Jerome
>
>
>
>
> une compagnie
>
> RAPPROCHEZ LA DISTANCE
>
> *Jérôme Godbout*
> Développeur Logiciel Sénior /
> Senior Software Developer
>
> *p:* +1 (418) 800-1073 ext.:109
>
> amotus.ca <http://www.amotus-solutions.com/>
> statum-iot.com
>
> <https://www.facebook.com/LesSolutionsAmotus/>
> <https://www.linkedin.com/company/amotus-solutions/>
> <https://twitter.com/AmotusSolutions>
> <https://www.youtube.com/channel/UCoYpQgsmj1iJZyDjTQ3x8Ig>
>
> *COVID-19 : we are glad to inform you that Amotus
> <https://www.amotus-solutions.com/> are up and running with limited impact
> on our performance. We will keep you informed of any changes as they occur.*
>
> *COVID-19 : nous sommes fiers d’informer nos collaborateurs que Amotus
> opèrent adéquatement et que l’impact sur notre productivité est minimisé.
> Nous vous tiendrons au courant de tout changement.*
>
>
>
> *From:* Interest <interest-bounces at qt-project.org> *On Behalf Of *Simon
> FEUTRIER
> *Sent:* August 17, 2020 3:48 AM
> *To:* interest at qt-project.org
> *Subject:* [Interest] BLE : Bonding and ble security
>
>
>
> Hi,
>
>
>
> That is the first time I use this mailing list, so tell me if I'm doing
> anything wrong when using it. Thanks !
>
>
>
> Now my problem.
>
> I'm developing a Qt application that communicates with a BLE device. It
> worked perfectly until I tried to add some security. When I turned on "Just
> Works" security mode (device side), I was not able anymore to write in a
> characteristic (or read) from my Qt application.
>
> I compared the Bluetooth messages sent from Qt app and from the android
> app *nfr Connect* and I see that automatically, the *nrf Connect* app
> sends a bonding request when it fails to write.
> Qt does not do this. That is the only difference that makes the android
> app working but not my Qt app.
>
>
>
> I finally made it work once : I start my Qt App, pair my BLE device with *Windows
> parameters* and then it works *one time *only (after that I need to
> unpair my device from Windows parameters and redo the same process). It
> only works if it has been paired with Windows parameters...
>
> I could not find anything about bonding in the API or security mode
> settings.
> Any idea ? Should I post it as a bug or am I missing something ?
>
>
>
> Thanks,
>
>
>
> Regards,
>
>
>
> Simon Feutrier
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/interest/attachments/20200817/be9d379f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 98353 bytes
Desc: not available
URL: <http://lists.qt-project.org/pipermail/interest/attachments/20200817/be9d379f/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 1427 bytes
Desc: not available
URL: <http://lists.qt-project.org/pipermail/interest/attachments/20200817/be9d379f/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 730 bytes
Desc: not available
URL: <http://lists.qt-project.org/pipermail/interest/attachments/20200817/be9d379f/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.png
Type: image/png
Size: 929 bytes
Desc: not available
URL: <http://lists.qt-project.org/pipermail/interest/attachments/20200817/be9d379f/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 839 bytes
Desc: not available
URL: <http://lists.qt-project.org/pipermail/interest/attachments/20200817/be9d379f/attachment-0005.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.jpg
Type: image/jpeg
Size: 1167 bytes
Desc: not available
URL: <http://lists.qt-project.org/pipermail/interest/attachments/20200817/be9d379f/attachment-0005.jpg>
More information about the Interest
mailing list