[PySide] pyside build using pyenv-installed local Python fails, using system-installed Shiboken2 config/cmake file ?

[PGNet Dev]

On 2/26/20 9:57 AM, PGNet Dev wrote:
> explicitly spec'ing the current build's shiboken2 cmake dir path, adding
> 
> 	python setup.py install \
> 	 --build-type=all \
> 	 --qmake=/usr/bin/qmake-qt5 \
> 	 --parallel=8 \
> 	 --build-tests \
> +	 --shiboken-config-dir=/usr/local/src/pyside-setup/pyside3_install/py3.8-qt5.14.1-64bit-release/lib/cmake/Shiboken2-5.14.1/
> 
> _does_ appear to *workaround* the find-shiboken problem,

if instead of using 

	python setup.py install ...

i use cmake build directly

	mkdir build
	cd build
	cmake ..
	make -j

the config + build completes without apparent error, correctly finding shiboken/pyside cmake files, etc.

afaict, that's not the doc'd build method

i've not tested the build in downstream use yet; no clue if it's 'good' yet