[Qt-creator] QtCreator with S60 Emulator.
Sam Dutton
Sam.Dutton at bbc.co.uk
Fri Jul 10 17:49:35 CEST 2009
>> if M:\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\tools\make.exe exists
<<
I just double checked, by the way, and yes, this does exist.
>> Which Qt Creator version do you use? <<
1.2.0.
>> Does it work if you explicitly put M:\S60\devices
\S60_3rd_FP2_SDK_v1.1\epoc32\tools\make.exe into the "Override make"
in Projects mode -> build settings -> build steps -> make ? <<
Aha! Gets a bit further now, though I don't understand the error -- see
below.
>> Does it work if you put the epoc32 paths into your computers main
PATH environment? <<
When you say *paths*, which do you mean? I've tried adding
M:\S60\devices\S60_3rd_FP2_SDK_v1.1_2\epoc32 to the system PATH variable
(though not creating an EPOCROOT variable).
Sam
........................
Configuration unchanged, skipping QMake step.
Starting: M:\S60\devices\S60_3rd_FP2_SDK_v1.1_2\epoc32\tools\make.exe
bldmake bldfiles
BLDMAKE ERROR: ERROR: First CPP executable found in path is in
C:\Program Files\Common Files\Symbian\Tools\,
but the required CPP.EXE was expected to be found in a directory
with a name ending in \GCC\BIN\, where the Cygnus tools
this program depends upon are stored.
Is your path set up correctly?
BEGIN failed--compilation aborted at
M:\S60\devices\S60_3rd_FP2_SDK_v1.1_2\epoc32\tools\/Checkgcc.pm line 83.
Compilation failed in require at
M:\S60\devices\S60_3rd_FP2_SDK_v1.1_2\epoc32\tools\/PREPFILE.PM line 20.
BEGIN failed--compilation aborted at
M:\S60\devices\S60_3rd_FP2_SDK_v1.1_2\epoc32\tools\/PREPFILE.PM line 20.
Compilation failed in require at
M:\S60\devices\S60_3rd_FP2_SDK_v1.1_2\epoc32\tools\/Modload.pm line 49.
ABLD.BAT build winscw udeb
make -r -f
"\S60\devices\S60_3rd_FP2_SDK_v1.1_2\EPOC32\BUILD\src\workspace\f1-test\
EXPORT.make" EXPORT VERBOSE=-s
make -r -f
"\S60\devices\S60_3rd_FP2_SDK_v1.1_2\EPOC32\BUILD\src\workspace\f1-test\
WINSCW.make" MAKEFILE VERBOSE=-s
\epoc32\tools\make.exe was called but is not supported in this release.
make -r -f
"\S60\devices\S60_3rd_FP2_SDK_v1.1_2\EPOC32\BUILD\src\workspace\f1-test\
WINSCW.make" LIBRARY VERBOSE=-s
\epoc32\tools\make.exe was called but is not supported in this release.
make -r -f
"\S60\devices\S60_3rd_FP2_SDK_v1.1_2\EPOC32\BUILD\src\workspace\f1-test\
WINSCW.make" RESOURCE CFG=UDEB VERBOSE=-s
\epoc32\tools\make.exe was called but is not supported in this release.
make -r -f
"\S60\devices\S60_3rd_FP2_SDK_v1.1_2\EPOC32\BUILD\src\workspace\f1-test\
WINSCW.make" TARGET CFG=UDEB VERBOSE=-s
\epoc32\tools\make.exe was called but is not supported in this release.
\epoc32\tools\make.exe was called but is not supported in this release.
make -r -f
"\S60\devices\S60_3rd_FP2_SDK_v1.1_2\EPOC32\BUILD\src\workspace\f1-test\
WINSCW.make" FINAL CFG=UDEB VERBOSE=-s
\epoc32\tools\make.exe was called but is not supported in this release.
Exited with code 0.
-----Original Message-----
From: qt-creator-bounces at trolltech.com
[mailto:qt-creator-bounces at trolltech.com] On Behalf Of Eike Ziller
Sent: 10 July 2009 15:19
To: qt-creator at trolltech.com
Subject: Re: [Qt-creator] QtCreator with S60 Emulator.
On Jul 10, 2009, at 1:03 PM, ext Sam Dutton wrote:
> Hi Eike
>
>>> the PATH setting should be preceded by <yoursdkroot>
> \epoc32\gcc\bin;<yoursdkroot>\epoc32\tools; <<
>
> I didn't make it clear, but I'd already tried that.
Hm, so if
M:\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\tools\make.exe
exists, I'm not sure why it still picks the other one.
Which Qt Creator version do you use?
Does it work if you explicitly put M:\S60\devices
\S60_3rd_FP2_SDK_v1.1\epoc32\tools\make.exe into the "Override make"
in Projects mode -> build settings -> build steps -> make ?
Does it work if you put the epoc32 paths into your computers main PATH
environment?
++ Eike
> My PATH in build settings looks like this:
>
> M:\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\gcc\bin;M:\S60\devices
> \S60_3rd_FP2_SDK_v1.1\epoc32\tools;M:\Qt\4.5.2-tower\bin;C:\Program
> Files\PC Connectivity Solution\;C:\Program Files\Common
> Files\Symbian\Tools;M:\Program Files\Nokia\Carbide.c++
> v2.0\x86Build\Symbian_Tools\Command_Line_Tools;M:\Perl\bin\;C:\WINNT
> \sys
> tem32;C:\WINNT;C:\WINNT\System32\Wbem;C:\WINNT
> \system32\WindowsPowerShel
> l\v1.0;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:
> \Program
> Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Support
> Tools\;M:\Program Files\Visual C++ Express Edition with
> SP1\Common7\IDE;C:\Program Files\Microsoft
> SDKs\Windows\v6.0A\bin;C:\Program Files\CSL Arm Toolchain\bin;M:
> \Program
> Files\TortoiseSVN\bin;M:\Program Files\QuickTime\QTSystem\;M:\Program
> Files\CSL Arm Toolchain\bin;M:\Qt\4.5.2-tower\bin;M:\Program
> Files\Visual C++ Express Edition with SP1\VC\bin;M:\Program Files
> \Visual
> C++ Express Edition with SP1\Common7\IDE;C:\Program Files\Microsoft
> SDKs\Windows\v6.0A\Lib;C:\Program Files\Microsoft
> SDKs\Windows\v6.0A\bin;M:\Program Files\CSL Arm
> Toolchain\bin;M:\Perl\bin;M:\Program Files\ffmpeg
>
> ...but I still get the error:
>
> Starting: C:/Program Files/Common Files/Symbian/Tools/make.exe
> clean -w
> Can't open perl script "C:\Program": No such file or directory
>
> (Note that, due to our IT policy I've had to install on the M drive
> -- I
> guess that may be a separate problem.)
>
> Sam
>
>
>
> -----Original Message-----
> From: qt-creator-bounces at trolltech.com
> [mailto:qt-creator-bounces at trolltech.com] On Behalf Of Eike Ziller
> Sent: 10 July 2009 11:34
> To: qt-creator at trolltech.com
> Subject: Re: [Qt-creator] QtCreator with S60 Emulator.
>
> Hej,
>
> On Jul 10, 2009, at 12:07 PM, ext Sam Dutton wrote:
>
>> Hi Eike
>>
>> I'm very keen to set up Qt Creator for developing S60 projects, as
>> per
>
>> the instructions in part a) in your mail below, but I'm having some
>> problems with path setup.
>>
>> If I set EPOCROOT to \S60\devices\S60_3rd_FP2_SDK_v1.1\\ (as per the
>> instructions) I get the error:
>>
>> Unable to resolve epocRoot '/S60/devices/S60_3rd_FP2_SDK_v1.1//' to
>
>> real dir on current drive, defaulting to '/' for mmp paths
>>
>> So, I removed the extra \ from the end of the path, but now I get the
>> following error:
>>
>> Starting: C:/Program Files/Common Files/Symbian/Tools/make.exe
>> clean -w
>> Can't open perl script "C:\Program": No such file or directory
>
> Either Markdown or its implementation in gitorious are bogus... so
> there are some \ and < errors in the wiki page :)
>
> It should actually be a single backslash in epocroot (as you have
> found out), and the PATH setting should be preceded by <yoursdkroot>
> \epoc32\gcc\bin;<yoursdkroot>\epoc32\tools; like in the example
> C:\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\gcc\bin;C:\S60\devices
> \S60_3rd_FP2_SDK_v1.1\epoc32\tools;
>
> And you really need to PREpend it (not append), it must override the
> path to the make.exe tool you got above, because that actually can't
> cope with spaces in paths :)
>
> Hope that resolves it for you,
> ++ Eike
>
>> It looks like there's a problem with spaces in paths, but I'm unclear
>> where this needs to be fixed. I've checked the makefile and other
>> files, but found nothing there.
>>
>> I've also tried (in build settings) quoting all paths in PATH that
>> begin with C:\Program Files -- and for PROGRAMFILES AND
>> COMMONPROGRAMFILES
>> --
>> but that doesn't seem to help.
>>
>> Sam
>>
>> -----Original Message-----
>> From: qt-creator-bounces at trolltech.com
>> [mailto:qt-creator-bounces at trolltech.com] On Behalf Of Eike Ziller
>> Sent: 08 July 2009 14:30
>> To: qt-creator at trolltech.com
>> Subject: Re: [Qt-creator] QtCreator with S60 Emulator.
>>
>> Hi,
>>
>> On Jul 7, 2009, at 6:07 AM, ext Sukant Banik wrote:
>>
>>> Hi,
>>>
>>> I have some question about Qt Creator IDE .
>>> 1.Can we configure QtCreator with S60 Emulator ?
>>>
>>> 2 .I have S60 5th edition SDK, Qt on S60 4.5.2 (Tower), and Qt
>>> creator
>>
>>> 1.2.0 IDE in an Xp machine. Please let me know how I can configure
>>> QtCreator with S60 emulator. (I want to execute MyFirstQtApp in in
>>> S60
>>
>>> emulator.)
>>>
>> There are two possible ways to follow for you:
>>
>> a) Check out the corresponding section in the online FAQ on
>> http://qt.gitorious.org/qt-creator/pages/QtS60WithQtCreator which
>> gives an overview about what you can do "manually" from within Qt
>> Creator.
>>
>> b) Get the most recent bleeding edge Qt Creator sources from the git
>> repository http://qt.gitorious.org/qt-creator, master branch, and
>> build it while having an environment variable QTCREATOR_WITH_S60 set
>> to something (e.g. QTCREATOR_WITH_S60=1). That gives you some more
>> direct, undocumented, and very experimental and unfinished support
>> for
>
>> Qt/S60 applications in Qt Creator.
>>
>> ++ Eike
>>
>> --
>> Eike Ziller
>> Software Engineer
>> Nokia, Qt Software
>> Phone +49 (0)30 6392 3255
>> Fax +49 (0)30 6392 3256
>> E-mail eike.ziller at nokia.com
>>
>>
>>
>>
>> _______________________________________________
>> Qt-creator mailing list
>> Qt-creator at trolltech.com
>> http://lists.trolltech.com/mailman/listinfo/qt-creator
>>
>> http://www.bbc.co.uk/
>> This e-mail (and any attachments) is confidential and may contain
>> personal views which are not the views of the BBC unless specifically
>> stated.
>> If you have received it in error, please delete it from your system.
>> Do not use, copy or disclose the information in any way nor act in
>> reliance on it and notify the sender immediately.
>> Please note that the BBC monitors e-mails sent or received.
>> Further communication will signify your consent to this.
>>
>>
>> _______________________________________________
>> Qt-creator mailing list
>> Qt-creator at trolltech.com
>> http://lists.trolltech.com/mailman/listinfo/qt-creator
>
> --
> Eike Ziller
> Software Engineer
> Nokia, Qt Software
> Phone +49 (0)30 6392 3255
> Fax +49 (0)30 6392 3256
> E-mail eike.ziller at nokia.com
>
>
>
>
> _______________________________________________
> Qt-creator mailing list
> Qt-creator at trolltech.com
> http://lists.trolltech.com/mailman/listinfo/qt-creator
>
> http://www.bbc.co.uk/
> This e-mail (and any attachments) is confidential and may contain
> personal views which are not the views of the BBC unless specifically
> stated.
> If you have received it in error, please delete it from your system.
> Do not use, copy or disclose the information in any way nor act in
> reliance on it and notify the sender immediately.
> Please note that the BBC monitors e-mails sent or received.
> Further communication will signify your consent to this.
>
>
> _______________________________________________
> Qt-creator mailing list
> Qt-creator at trolltech.com
> http://lists.trolltech.com/mailman/listinfo/qt-creator
--
Eike Ziller
Software Engineer
Nokia, Qt Software
Phone +49 (0)30 6392 3255
Fax +49 (0)30 6392 3256
E-mail eike.ziller at nokia.com
_______________________________________________
Qt-creator mailing list
Qt-creator at trolltech.com
http://lists.trolltech.com/mailman/listinfo/qt-creator
http://www.bbc.co.uk/
This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated.
If you have received it in error, please delete it from your system.
Do not use, copy or disclose the information in any way nor act in reliance on it and notify the sender immediately.
Please note that the BBC monitors e-mails sent or received.
Further communication will signify your consent to this.
More information about the Qt-creator-old
mailing list