[Qt-creator] Clickable gcc output to go to error location

[Daniel Lidström]

Hi Tobias,

I am using make to launch Boost Build:

"make jam" from my project settings details.

Makefile looks like this:

jam:
        bjam toolset=gcc-4 -j3

If I do "make jam > output.txt" I can see all gcc warnings in output.txt,
so it looks as if everything actually is written to stdout.

daniel-dev:/home/daniel/projects/workspaces/GEOROG-2598> make jam > output.txt
daniel-dev:/home/daniel/projects/workspaces/GEOROG-2598> cat output.txt | grep ": warning" | head -n 1
/home/daniel/projects/workspaces/GEOROG-2598/GeoROG/GCore/GCore.cpp:131:2: warning: #warning Product name has not been set in the Makefile! Setting to "UMC 3D"

Thanks to all who have suggested things to try.

The Build Issues pane only has buttons for Clear, Previous Item, Next Item, and Show Warnings. No funnel unfortunately.

/Daniel

> -----Original Message-----
> From: Tobias Hunger [mailto:tobias.hunger at nokia.com] 
> Sent: Thursday, February 04, 2010 7:50 PM
> To: qt-creator at trolltech.com
> Cc: Daniel Lidström
> Subject: Re: [Qt-creator] Clickable gcc output to go to error location
> 
> Hi Daniel!
> 
> Which Toolchain is selected for your project? (Project mode, General, 
> show details)
> 
> Which build steps are you using exactly? I assume a Make one?
> 
> QtCreator parses the output of the compiler. Which Output 
> parser is used 
> depends on the toolchain as well as the make command. GCC should 
> noirmally work;-)
> 
> Best Regards,
> Tobias
> 
> On 04.02.2010 16:27, ext Daniel Lidström wrote:
> > Hello!
> >
> > I have recently tried out the excellent Qt Creator 1.3.1. 
> It works very well for me on Ubuntu 9.10.
> > However, when I compile my Makefile-based project that 
> calls make, I am unable to click the output
> > to go to error locations provided by gcc. This would be 
> very useful, but I don't know the level of
> > support. Here's a sample output from my compilation:
> >
> > Running build steps for project UMC3D...
> > Starting: /usr/bin/make jam
> > bjam toolset=gcc-4 -j3
> > ...patience...
> > ...patience...
> > ...patience...
> > ...patience...
> > ...found 13499 targets...
> > ...updating 13 targets...
> > gcc.compile.c++ GeoROG/bin/gcc-4/debug/GeoWarningPopup.o
> > 
> /home/daniel/projects/workspaces/GEOROG-2598/GeoROG/GUI/Widget
> /GeoWarningPopup.cpp:111:2: warning: #warning We have to 
> figure out a better way to handle the priorities
> > In file included from 
> /home/daniel/projects/workspaces/GEOROG-2598/GeoROG/GUI/Widget
> /GeoWarningPopup.cpp:15:
> > GeoROG/Publisher/BucketControllerTopic.h:52: error: 
> 'BucketTouchPoint' has not been declared
> > GeoROG/Publisher/BucketControllerTopic.h:79: error: 
> 'BucketTouchPoint' does not name a type
> > GeoROG/Publisher/BucketControllerTopic.h:91: error: 
> 'BucketTouchPoint' does not name a type
> >
> > "g++" -ftemplate-depth-128 -O0 -fno-inline -Wall -g -fPIC 
> -Winvalid-pch `pkg-config --cflags glib-2.0` `pkg-config 
> --cflags libpng` -DBOOST_BUILD_PCH_ENABLED -DDEBUGMODE=0 
> -DGR_BUILD_TIME=1228923841 -DGR_MAJOR_VERSION=99 
> -DGR_MINOR_VERSION=99 -DGR_PATCH_VERSION=99 
> -DGR_SYSTEM_VERSION=9999 -DHAS_OBJECT_MANAGER 
> -DMIKROFYN_GEOROG=NO -DNO_EXARDRV -DPRODUCT_VERSION='"Jam"' 
> -DSEARCH_FOR_LOCK=0 -D_DEBUG -I"GeoROG/bin/gcc-4/debug" 
> -I"/home/daniel/projects/Vendor/Alglib/2.0.0.stable" 
> -I"/home/daniel/projects/Vendor/Boost/include/boost-1_37" 
> -I"/home/daniel/projects/Vendor/LeicaAuth" 
> -I"/home/daniel/projects/Vendor/LeicaTGS/trunk" 
> -I"/home/daniel/projects/Vendor/newmat/11" -I"GFL" 
> -I"GFL/CAN/include" -I"GFL/Convert/include" 
> -I"GFL/Device/include" -I"GFL/Dialogs/include" 
> -I"GFL/File/include" -I"GFL/FileCommunicator/include" 
> -I"GFL/Kinematics/include" -I"GFL/LandXML/include" 
> -I"GFL/Map/include" -I"GFL/Model/include" 
> -I"GFL/ProtocolHandler/include" -I"GFL/Publisher/include" -I"GFL/Refe
> renceModel/include" -I"GFL/Transform/include" 
> -I"GFL/Xml/include" -I"GeoROG" -I"SBGFLTK" -c -o 
> "GeoROG/bin/gcc-4/debug/GeoWarningPopup.o" 
> "/home/daniel/projects/workspaces/GEOROG-2598/GeoROG/GUI/Widge
> t/GeoWarningPopup.cpp"
> >
> > ...failed gcc.compile.c++ 
> GeoROG/bin/gcc-4/debug/GeoWarningPopup.o...
> > .
> > .
> > .
> >
> > My project uses Makefile to launch Boost Build. As you see 
> the output is regular gcc, but I can't click to go to 
> BucketControllerTopic.h line 52.
> > Is there a way to enable this support?
> >
> > Thanks in advance!
> >
> > Regards,
> >
> > Daniel Lidström
> > Stockholm, Sweden
> >
> > _______________________________________________
> > Qt-creator mailing list
> > Qt-creator at trolltech.com
> > http://lists.trolltech.com/mailman/listinfo/qt-creator
> 
>