[Qt-creator] Build issues under OSX10.5

[Victor Sardina]

Aurélien:

I forgot to add that you need to check out the 2.0 branch (I used that
branch last time I built it about a week ago). That applies if nothing
has changed since the last time I asked, but maybe one of the Trolls can
correct me if I err on this one...

Victor


On 7/6/10 12:52 AM, Victor Sardina wrote:
> Aurélien:
> 
> Both André and Eike explained it very well. The main issue you have, I
> believe, have to do with the "parallel" build directory. That bit me
> once, and because of that I decided to send my email about it (it gets
> increasingly frustrating when in fact the problem has a very simple
> solution). If you apply the recommended steps you get the following flow:
> 
>>> git clone git://gitorious.org/qt-creator/qt-creator.git
>>> mkdir build; cd build
>>> qmake ../qt-creator/qt-creator.pro
>>> make
> 
> Do not create your build directory inside the qt-creator source
> directory, but parallel to it. And again, you need Qt-4.7.0 to build
> QtCreator. That should provide you with the Qt Creator.app application
> bundle under the "build/bin" directory. I have never had any trouble
> building that way, either under Mac 10.5 or 10.6.
> 
> Good luck,
> Victor
> 
> PS:
> 
> Eike:
> You guys keep spoiling us.Using QtCreator to build QtCreator itself
> actually turns into the easiest way to do it yet...:-)
> 
> 
> 
> On 7/5/10 11:07 PM, André Pönitz wrote:
>> On Tuesday 06 July 2010 10:36:16 ext Aurélien Vallée wrote:
>>> I already tried all these steps.
>>> Using Qt creator does not change anything, it just basically call qmake/make or qmake/xcodebuild.
>>>
>>> Here is what I'm doing:
>>>
>>> ### Using g++
>>> git clone QTCREATORGITURL
>>> cd qt-creator
>>> mkdir build; cd build
>>
>> Create a build directory _in parallel_ to the source tree. I.e.
>>
>> cd qt-creator
>> mkdir ../build ; cd ../build
>>
>>> qmake ..\qt-creator.pro<http://qt-creator.pro> -recursive -spec macx-g++
>>
>> Backslashs seem wrong, too:
>>
>>  qmake -r ../qt-creator/qt-creator.pro
>>
>> Andre'
>>
>> PS: Not being able to build in a subdirectory of the source tree is a qmake 
>> problem that can be worked around by applying the patch at
>> http://creator.pastebin.com/d72U2z9e to your Qt sources:
>>
>>
>> --------------------------- snip ------------------------
>> diff --git a/mkspecs/features/resources.prf b/mkspecs/features/resources.prf
>> index a305a4f..0003a7c 100644
>> --- a/mkspecs/features/resources.prf
>> +++ b/mkspecs/features/resources.prf
>> @@ -20,8 +20,9 @@ resource_combine {
>>         QMAKE_RESOURCE_FLAGS += -name ${QMAKE_FILE_BASE}
>>      }
>>  }
>> -rcc.commands = "$$QMAKE_RCC" $$QMAKE_RESOURCE_FLAGS "${QMAKE_FILE_IN}" -o "${QMAKE_FILE_OUT}"
>> -rcc.depend_command = "$$QMAKE_RCC" -list $$QMAKE_RESOURCE_FLAGS "${QMAKE_FILE_IN}"
>> +rcc.commands = cd "$$OUT_PWD" && "$$QMAKE_RCC" $$QMAKE_RESOURCE_FLAGS "${QMAKE_FILE_IN}" -o "${QMAKE_FILE_OUT}"
>> +rcc.depend_command = cd "$$OUT_PWD" && "$$QMAKE_RCC" -list $$QMAKE_RESOURCE_FLAGS "${QMAKE_FILE_IN}"
>> +
>>  rcc.input = RESOURCES
>>  rcc.variable_out = SOURCES
>>  rcc.name = RCC ${QMAKE_FILE_IN}
>> --------------------------- snip ------------------------
>>
>> _______________________________________________
>> Qt-creator mailing list
>> Qt-creator at trolltech.com
>> http://lists.trolltech.com/mailman/listinfo/qt-creator
>>
> 
> 
> 
> _______________________________________________
> Qt-creator mailing list
> Qt-creator at trolltech.com
> http://lists.trolltech.com/mailman/listinfo/qt-creator

-------------- next part --------------
A non-text attachment was scrubbed...
Name: victor_sardina.vcf
Type: text/x-vcard
Size: 577 bytes
Desc: not available
Url : http://lists.qt-project.org/pipermail/qt-creator-old/attachments/20100706/896c1c5b/attachment.vcf