[Qt-creator] [Interest] qt giving the ld error

[Nilesh Kokane]

Hi  Ch'Gans,


I have a final setup of Qt-creator as follows.I ran the script in the
/opt/poky/1.6.1/ and opened the qt-creator from the concole. with this
settings as below i'm trying to cross-compile the sample clock code


1. General http://picpaste.com/1-gAmJsS3o.png
2. Kits http://picpaste.com/2-Y3kFvHIG.png
3. Qt version http://picpaste.com/3-lwZngysy.png
4  compiler http://picpaste.com/4-M4y6gJYb.png
5. Debugger http://picpaste.com/5-DQhrxi6t.png6. CMake
http://picpaste.com/6-l3FhICDq.png
7. Build Settings http://picpaste.com/7-4myooBgL.png

With the settings ,clock code is giving me error[8].

8. http://picpaste.com/8-kGmTWy3P.png

14:32:34: Running steps for project clocks...

14:32:34: Could not start process
"/opt/poky/1.6.1/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/bin/make"
clean

Error while building/deploying project clocks (kit: wandboard)

When executing step 'Make'

14:32:34: Elapsed time: 00:00.


Please if you can assist.



Thanks

Nilesh Kokane

-- 
“The contents of this e-mail message and any attachments are confidential 
and are intended solely for addressee. The information may also be legally 
privileged. This transmission is sent in trust, for the sole purpose of 
delivery to the intended recipient. If you have received this transmission 
in error, any use, reproduction or dissemination of this transmission is 
strictly prohibited. If you are not the intended recipient, please 
immediately notify the sender by reply e-mail or phone and delete this 
message and its attachments, if any.”
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/qt-creator/attachments/20140811/3ef6a5de/attachment.html>