[Qt-interest] QTextTable with single pixel border?

[Israel Brewster]

Thanks for the response. My apologies for the delay in my follow up on  
this subject, but I was stuck out of state for a while. The code you  
suggested almost works, with cell spacing set to -1. The only  
remaining problem is that a couple of the cells show a heavy line  
separation. Most are fine, but columns 5 and 13 have a bold line on  
their right border - not double in appearance, but about twice as  
heavy as the other lines. I can live with this, but it is not  
desirable, so if anyone knows how I can fix it, I would love to hear  
it. Thanks!

-----------------------------------------------
Israel Brewster
Computer Support Technician II
Frontier Flying Service Inc.
5245 Airport Industrial Rd
Fairbanks, AK 99709
(907) 450-7250 x293
-----------------------------------------------



On Apr 16, 2009, at 2:40 PM, Malyushytsky, Alex wrote:

>
> Is single line drawn over single line is fine?
> Have you played with
>    QTextTableFormat tableFormat;
>    tableFormat.setCellSpacing(0);
> if it gives you double line , have you tried
>    tableFormat.setCellSpacing( -1 );
>
> Regards,
>    Alex
>
> -----Original Message-----
> From: qt-interest-bounces at trolltech.com [mailto:qt-interest-bounces at trolltech.com 
> ] On Behalf Of Israel Brewster
> Sent: Thursday, April 16, 2009 9:16 AM
> To: qt-interest List
> Subject: Re: [Qt-interest] QTextTable with single pixel border?
>
> Ok, this is driving me nuts. I would have thought this would be a
> basic feature, real simple to implement, but try as I might I can not
> get it to give me a single line between cells. What appears to be
> happening is that it outlines each cell - fair enough, except for the
> fact that that means I always get a double line between cells (one for
> the cell on the left and one for the cell on the right) additionally,
> I seem to be getting an extra border all the way around the entire
> table. And I can't seem to get any responses to my question here,
> either. Am I asking wrong? Or is this basic table design really not
> possible (at least, without re-writing substantial chunks of Qt code)?
> I can't imagine designing a table where single lines between cells
> isn't a possibility...
> -----------------------------------------------
> Israel Brewster
> Computer Support Technician II
> Frontier Flying Service Inc.
> 5245 Airport Industrial Rd
> Fairbanks, AK 99709
> (907) 450-7250 x293
> -----------------------------------------------
>
>
>
> On Apr 13, 2009, at 12:17 PM, Israel Brewster wrote:
>
>> Is there any way to make a QTextTable where the cells are separated  
>> by
>> a single-pixel wide black line? I'm looking for just a basic grid
>> (with text in the cells) - no fancy effects or anything. The  
>> default I
>> am getting is more of a double line, which I don't want. I tried  
>> using
>> the setBorderStyle(QTextFrameFormat::BorderStyle_Solid); command, but
>> that didn't help. Thanks!
>>
>> -----------------------------------------------
>> Israel Brewster
>> Computer Support Technician II
>> Frontier Flying Service Inc.
>> 5245 Airport Industrial Rd
>> Fairbanks, AK 99709
>> (907) 450-7250 x293
>> -----------------------------------------------
>>
>>
>>
>> _______________________________________________
>> Qt-interest mailing list
>> Qt-interest at trolltech.com
>> http://lists.trolltech.com/mailman/listinfo/qt-interest
>
> _______________________________________________
> Qt-interest mailing list
> Qt-interest at trolltech.com
> http://lists.trolltech.com/mailman/listinfo/qt-interest
>
>
> ---------------------------------------------------------------------------------------------------
> Weidlinger Associates, Inc. made the following annotations.
>
> "This message and any attachments are solely for the intended  
> recipient and may contain confidential or privileged information. If  
> you are not the intended recipient, any disclosure, copying, use, or  
> distribution of the information included in this message and any  
> attachments is prohibited. If you have received this communication  
> in error, please notify us by reply e-mail and immediately and  
> permanently delete this message and any attachments. Thank you."
>
> "Please consider our environment before printing this email."
>
> _______________________________________________
> Qt-interest mailing list
> Qt-interest at trolltech.com
> http://lists.trolltech.com/mailman/listinfo/qt-interest