[Qt-interest] qt 4.7 installer: there's a problem with your mingw installation
Gabriele Kahlout
gabriele at mysimpatico.com
Thu May 13 10:23:08 CEST 2010
that's the bug.
2010/5/13 Gregor Kovač <gregor.kovac at mikropis.si>
> Hi!
>
> > /bin/sh.exe: C:Qtbin/uic.exe: No such file or directory
>
> Shouldn't that be C:\Qt\bin\uic.exe ?
>
> Best regards,
> Kovi
>
> On nedelja 9. maja 2010 16:38:20 Gabriele Kahlout wrote:
> > and C:\MingW\bin is in my path also. Just in case some one points this
> out. I've adding and removing it.
> >
> > and everytime a different taste:
> >
> > /bin/sh.exe: C:Qtbin/uic.exe: No such file or directory
> > make[3]: *** [ui_mainwindow.h] Error 127
> > make[2]: *** [release] Error 2
> >
> > Is this a bug in qmake?
> >
> > 2010/5/9 Gabriele Kahlout <gabriele at mysimpatico.com<mailto:
> gabriele at mysimpatico.com>>
> > I've ignored and proceeded with the install. BTW I got the same warning
> also with qt 4.6.2.
> >
> > Now when I run a qt application through netbeans it runs, but not the
> hello world, as there seems to be a / path issue by qmake and or/msys:
> >
> > "/usr/bin/make" -f nbproject/Makefile-Debug.mk QMAKE=/C/Qt/bin/qmake.exe
> SUBPROJECTS= .build-conf
> > make[1]: Entering directory `/c/Users/simpatico/ws/HelloQtWorld_2'
> > /C/Qt/bin/qmake.exe VPATH=. -o qttmp-Debug.mk nbproject/qt-Debug.pro
> > mv -f qttmp-Debug.mk nbproject/qt-Debug.mk
> > "/usr/bin/make" -f nbproject/qt-Debug.mk
> dist/Debug/MinGW-Windows/HelloQtWorld_2.exe
> > make[2]: c:/Qt/binuic.exe: Command not found
> > make[2]: Entering directory `/c/Users/simpatico/ws/HelloQtWorld_2'
> > c:/Qt/binuic.exe HelloForm.ui -o ui_HelloForm.h
> > make[2]: *** [ui_HelloForm.h] Error 127
> > make[2]: Leaving directory `/c/Users/simpatico/ws/HelloQtWorld_2'
> > make[1]: *** [.build-conf] Error 2
> > make[1]: Leaving directory `/c/Users/simpatico/ws/HelloQtWorld_2'
> > make: *** [.build-impl] Error 2
> >
> > BUILD FAILED (exit value 2, total time: 1s)
> >
> > Qt creator instead is able to build projects that depend on ui.exe.
> > So it seems QPATH sets its path correctly for qt creator's use, but not
> for what netbeans expects.
> >
> >
> > I don't know how to resolve this path \ issue. Could someone assist me?
> >
> > My path:
> > C:\Program Files\CollabNet\Subversion
> Client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Qt\bin;
> >
> >
> >
> >
> > 2010/5/9 Gabriele Kahlout <gabriele at mysimpatico.com<mailto:
> gabriele at mysimpatico.com>>
> > gcc --version:
> > gcc (GCC) 4.5.0
> > ....
> >
> > win 7 32-bit
> >
> >
> >
> > 2010/5/9 Gabriele Kahlout <gabriele at mysimpatico.com<mailto:
> gabriele at mysimpatico.com>>
> >
> > Hello,
> > In the installer of qt 4.7 after selecting my mingw installation
> directory I get a dialog with the above msg. Note that I've mingw with msys
> installed, as netbeans requires here:
> http://netbeans.org/kb/docs/cnd/qt-applications.html
> >
> > What's qt's problem?
> >
> > qt-win-opensource-4.7.0-beta1-mingw.exe
> >
> > --
> > Regards,
> > K. Gabriele
> >
> > --- unchanged since 25/1/10 ---
> > P.S. Unless a notification (LON), please reply either with an answer OR
> with " ACK" appended to this subject within 48 hours. Otherwise, I might
> resend.
> > In(LON, this) ∨ In(48h, TimeNow) ∨ ∃x. In(x, MyInbox) ∧ IsAnswerTo(x,
> this) ∨ (In(subject(this), subject(x)) ∧ In(ACK, subject(x)) ∧
> ¬IsAnswerTo(x,this)) ⇒ ¬IResend(this).
> >
> > Also note that correspondence may be received only from specified a
> priori senders, or if the subject of this email ends with a code, eg.
> -LICHT01X, then also from senders whose reply contains it.
> > ∀x. In(x, MyInbox) ⇒ In(senderAddress(x), MySafeSenderList) ∨ (∃y. In(y,
> subject(this) ) ∧ In(y,x) ∧ isCodeLike(y, -LICHT01X) ).
> >
> >
> >
> >
> > --
> > Regards,
> > K. Gabriele
> >
> > --- unchanged since 25/1/10 ---
> > P.S. Unless a notification (LON), please reply either with an answer OR
> with " ACK" appended to this subject within 48 hours. Otherwise, I might
> resend.
> > In(LON, this) ∨ In(48h, TimeNow) ∨ ∃x. In(x, MyInbox) ∧ IsAnswerTo(x,
> this) ∨ (In(subject(this), subject(x)) ∧ In(ACK, subject(x)) ∧
> ¬IsAnswerTo(x,this)) ⇒ ¬IResend(this).
> >
> > Also note that correspondence may be received only from specified a
> priori senders, or if the subject of this email ends with a code, eg.
> -LICHT01X, then also from senders whose reply contains it.
> > ∀x. In(x, MyInbox) ⇒ In(senderAddress(x), MySafeSenderList) ∨ (∃y. In(y,
> subject(this) ) ∧ In(y,x) ∧ isCodeLike(y, -LICHT01X) ).
> >
> >
> >
> >
> > --
> > Regards,
> > K. Gabriele
> >
> > --- unchanged since 25/1/10 ---
> > P.S. Unless a notification (LON), please reply either with an answer OR
> with " ACK" appended to this subject within 48 hours. Otherwise, I might
> resend.
> > In(LON, this) ∨ In(48h, TimeNow) ∨ ∃x. In(x, MyInbox) ∧ IsAnswerTo(x,
> this) ∨ (In(subject(this), subject(x)) ∧ In(ACK, subject(x)) ∧
> ¬IsAnswerTo(x,this)) ⇒ ¬IResend(this).
> >
> > Also note that correspondence may be received only from specified a
> priori senders, or if the subject of this email ends with a code, eg.
> -LICHT01X, then also from senders whose reply contains it.
> > ∀x. In(x, MyInbox) ⇒ In(senderAddress(x), MySafeSenderList) ∨ (∃y. In(y,
> subject(this) ) ∧ In(y,x) ∧ isCodeLike(y, -LICHT01X) ).
> >
> >
> >
> >
> > --
> > Regards,
> > K. Gabriele
> >
> > --- unchanged since 25/1/10 ---
> > P.S. Unless a notification (LON), please reply either with an answer OR
> with " ACK" appended to this subject within 48 hours. Otherwise, I might
> resend.
> > In(LON, this) ∨ In(48h, TimeNow) ∨ ∃x. In(x, MyInbox) ∧ IsAnswerTo(x,
> this) ∨ (In(subject(this), subject(x)) ∧ In(ACK, subject(x)) ∧
> ¬IsAnswerTo(x,this)) ⇒ ¬IResend(this).
> >
> > Also note that correspondence may be received only from specified a
> priori senders, or if the subject of this email ends with a code, eg.
> -LICHT01X, then also from senders whose reply contains it.
> > ∀x. In(x, MyInbox) ⇒ In(senderAddress(x), MySafeSenderList) ∨ (∃y. In(y,
> subject(this) ) ∧ In(y,x) ∧ isCodeLike(y, -LICHT01X) ).
> >
> >
> --
> -~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
> | Gregor Kovac | Gregor.Kovac at mikropis.si |
> | | http://kovica.blogspot.com |
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> | In A World Without Fences Who Needs Gates? |
> | Experience Linux. |
> -~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
>
--
Regards,
K. Gabriele
--- unchanged since 25/1/10 ---
P.S. Unless a notification (LON), please reply either with an answer OR with
" ACK" appended to this subject within 48 hours. Otherwise, I might resend.
In(LON, this) ∨ In(48h, TimeNow) ∨ ∃x. In(x, MyInbox) ∧ IsAnswerTo(x, this)
∨ (In(subject(this), subject(x)) ∧ In(ACK, subject(x)) ∧
¬IsAnswerTo(x,this)) ⇒ ¬IResend(this).
Also note that correspondence may be received only from specified a priori
senders, or if the subject of this email ends with a code, eg. -LICHT01X,
then also from senders whose reply contains it.
∀x. In(x, MyInbox) ⇒ In(senderAddress(x), MySafeSenderList) ∨ (∃y. In(y,
subject(this) ) ∧ In(y,x) ∧ isCodeLike(y, -LICHT01X) ).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.qt-project.org/pipermail/qt-interest-old/attachments/20100513/5cf9d6b1/attachment.html
More information about the Qt-interest-old
mailing list