[Qt-interest] Ulternative to qmake

yogesh upreti yogesh.upreti at gmail.com
Fri Sep 10 10:08:09 CEST 2010 

Hi,
I know the best way is to debug for qmake. But I am stuck with it for last
two weeks.
I was using Qt-Creator to make my project. But somehow it doesn't work.
I have reinstalled the programme 20 times, Removed all the posiible files
attached to it before reinstalling.
Tried removing registry attached to it (not sure if I have done that good)
before reinstalling.
Tried installing only Qt (no sdk) and run qmake from command line. But
somehow it doesn't work.
I have installed Qt-Creator SDK in my friend's pc and try to build up my
project there, there was no problem.
But in my PC I couldn't.
I even asked for qt-sdk-commertial version, but that too doesn't work. I
have been posting in every possible forum for last few weeks but no one
replys or have a answer for my question.

May be if you know and can tell me how should I make a fresh installation
for Qt (what all should I remove before reinstall) so that qmake works
again, i will be very thankful to you.

But please don't tell me to through away my 2000 euro computer. :D

Regards
Yogesh Upreti


Date: Fri, 10 Sep 2010 09:27:22 +0200
From: "R. Reucher" <rene.reucher at batcom-it.net>
Subject: Re: [Qt-interest] Ulternative to qmake
To: qt-interest at trolltech.com
Message-ID: <i6cmkq$chc$1 at eple.troll.no>
Content-Type: text/plain; charset="UTF-8"

yogesh upreti wrote:
> What are the other way to compile my project then qmake?
> qmake is not working in my laptop anymore, whenever I start it hangs and
> nothing happens.
> Is there another way to build a project?
1) You should fix you installation. If qmake "doesn't work anymore" then
there are _reasons_ to it...

2) When using Qt's .pro files, there's no way around qmake. You could,
however, create the makefile manually.

3) I don't see a reason not to use qmake. See 1) :)!

HTH, Ren?
--
Ren? Reucher
rene.reucher at batcom-it.net
http://www.batcom-it.net/

The intelligence of any discussion diminishes with the square of the
number of participants.
               -- Adam Walinsky

On Fri, Sep 10, 2010 at 9:46 AM, <qt-interest-request at trolltech.com> wrote:

> Send Qt-interest mailing list submissions to
>        qt-interest at trolltech.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://lists.trolltech.com/mailman/listinfo/qt-interest
> or, via email, send a message with subject or body 'help' to
>        qt-interest-request at trolltech.com
>
> You can reach the person managing the list at
>        qt-interest-owner at trolltech.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Qt-interest digest..."
>
>
> Today's Topics:
>
>   1. Ulternative to qmake (yogesh upreti)
>   2. Styling a QToolbutton menu with stylesheets (norulez)
>   3. Re: Ulternative to qmake (Gopalakrishna Bhat)
>   4. Re: Ulternative to qmake (R. Reucher)
>   5. Re: Ulternative to qmake (R. Reucher)
>   6. Re: Ulternative to qmake (Gopalakrishna Bhat)
>   7. Re: Ulternative to qmake (Gopalakrishna Bhat)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 10 Sep 2010 09:08:36 +0200
> From: yogesh upreti <yogesh.upreti at gmail.com>
> Subject: [Qt-interest] Ulternative to qmake
> To: qt-interest at trolltech.com
> Message-ID:
>        <AANLkTikkYgfesm+wTB9CEUN4-MTpDZwNHs1SK3HRDgYq at mail.gmail.com<AANLkTikkYgfesm%2BwTB9CEUN4-MTpDZwNHs1SK3HRDgYq at mail.gmail.com>
> >
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hallo group,
> What are the other way to compile my project then qmake?
> qmake is not working in my laptop anymore, whenever I start it hangs and
> nothing happens.
> Is there another way to build a project?
>
> Regards,
> Yogesh Upreti
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.trolltech.com/pipermail/qt-interest/attachments/20100910/e52f177e/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Fri, 10 Sep 2010 09:10:08 +0200
> From: norulez <norulez at me.com>
> Subject: [Qt-interest] Styling a QToolbutton menu with stylesheets
> To: qt-interest at trolltech.com
> Message-ID: <3CA0000F-8705-42C3-8452-17D71705671F at me.com>
> Content-Type: text/plain; charset=us-ascii
>
> Hello,
>
> I'm trying to style a menu for a QToolButton with stylesheets, so I used
> the example for QMenu, but it doesn't work.
>
> Toolbutton->setMenu(myMenu);
>
> Can anybody give me a hint how this can be done?
>
> Thanks in advance
> Best Regards
> NoRulez
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 10 Sep 2010 12:56:58 +0530
> From: Gopalakrishna Bhat <gopalakbhat at gmail.com>
> Subject: Re: [Qt-interest] Ulternative to qmake
> To: yogesh upreti <yogesh.upreti at gmail.com>
> Cc: qt-interest at trolltech.com
> Message-ID:
>        <AANLkTinB2YxeAG0PuzQPbosV2PgodtD-K2p2MW=rMago at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hello,
>
> You can use cmake for your projects if you find qmake hanging.
>
> With regards,
> Gopalakrishna Bhat A
>
> On Fri, Sep 10, 2010 at 12:38 PM, yogesh upreti <yogesh.upreti at gmail.com
> >wrote:
>
> > Hallo group,
> > What are the other way to compile my project then qmake?
> > qmake is not working in my laptop anymore, whenever I start it hangs and
> > nothing happens.
> > Is there another way to build a project?
> >
> > Regards,
> > Yogesh Upreti
> >
> >
> > _______________________________________________
> > Qt-interest mailing list
> > Qt-interest at trolltech.com
> > http://lists.trolltech.com/mailman/listinfo/qt-interest
> >
> >
>
>
> --
> My blog http://gkbhat.blogspot.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.trolltech.com/pipermail/qt-interest/attachments/20100910/ff5e7dae/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Fri, 10 Sep 2010 09:27:22 +0200
> From: "R. Reucher" <rene.reucher at batcom-it.net>
> Subject: Re: [Qt-interest] Ulternative to qmake
> To: qt-interest at trolltech.com
> Message-ID: <i6cmkq$chc$1 at eple.troll.no>
> Content-Type: text/plain; charset="UTF-8"
>
> yogesh upreti wrote:
> > What are the other way to compile my project then qmake?
> > qmake is not working in my laptop anymore, whenever I start it hangs and
> > nothing happens.
> > Is there another way to build a project?
> 1) You should fix you installation. If qmake "doesn't work anymore" then
> there are _reasons_ to it...
>
> 2) When using Qt's .pro files, there's no way around qmake. You could,
> however, create the makefile manually.
>
> 3) I don't see a reason not to use qmake. See 1) :)!
>
> HTH, Ren?
> --
> Ren? Reucher
> rene.reucher at batcom-it.net
> http://www.batcom-it.net/
>
> The intelligence of any discussion diminishes with the square of the
> number of participants.
>                -- Adam Walinsky
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 10 Sep 2010 09:29:15 +0200
> From: "R. Reucher" <rene.reucher at batcom-it.net>
> Subject: Re: [Qt-interest] Ulternative to qmake
> To: qt-interest at trolltech.com
> Message-ID: <i6cmob$chc$2 at eple.troll.no>
> Content-Type: text/plain; charset="UTF-8"
>
> Gopalakrishna Bhat wrote:
> > You can use cmake for your projects if you find qmake hanging.
> Just curious: does CMake process .pro files directly or does it call qmake
> in the background?
> --
> Ren? Reucher
> rene.reucher at batcom-it.net
> http://www.batcom-it.net/
>
>
>
> ------------------------------
>
> Message: 6
> Date: Fri, 10 Sep 2010 13:10:16 +0530
> From: Gopalakrishna Bhat <gopalakbhat at gmail.com>
> Subject: Re: [Qt-interest] Ulternative to qmake
> To: "R. Reucher" <rene.reucher at batcom-it.net>
> Cc: qt-interest at trolltech.com
> Message-ID:
>        <AANLkTin8E8uVmW2WhXjbQbxuA-pMjpFM9u5jKmT-43rb at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi,
>
> The question was for an alternative for qmake, there was no mention of a
> pro
> file.
>
> Using qmake and the .pro file is not the only way to manage projects for
> qt.
> You can even use cmake for that. It requires creation of a CMakeLists.txt
> file. What qmake generates for you is a makefile, cmake also generates a
> makefile.
>
> On Fri, Sep 10, 2010 at 12:59 PM, R. Reucher <rene.reucher at batcom-it.net
> >wrote:
>
> > Gopalakrishna Bhat wrote:
> > > You can use cmake for your projects if you find qmake hanging.
> > Just curious: does CMake process .pro files directly or does it call
> qmake
> > in the background?
> > --
> > Ren? Reucher
> > rene.reucher at batcom-it.net
> > http://www.batcom-it.net/
> >
> > _______________________________________________
> > Qt-interest mailing list
> > Qt-interest at trolltech.com
> > http://lists.trolltech.com/mailman/listinfo/qt-interest
> >
>
>
>
> --
> My blog http://gkbhat.blogspot.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.trolltech.com/pipermail/qt-interest/attachments/20100910/ec4d4481/attachment-0001.html
>
> ------------------------------
>
> Message: 7
> Date: Fri, 10 Sep 2010 13:16:00 +0530
> From: Gopalakrishna Bhat <gopalakbhat at gmail.com>
> Subject: Re: [Qt-interest] Ulternative to qmake
> To: yogesh upreti <yogesh.upreti at gmail.com>
> Cc: qt-interest at trolltech.com
> Message-ID:
>        <AANLkTi=EVN_YPTfMDB5B5yyKQjpLz99P35RWDFigAGxf at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> This contains pretty good information about cmake with demo examples
>
> http://qtnode.net/wiki/Qt4_with_cmake
>
> On Fri, Sep 10, 2010 at 1:12 PM, yogesh upreti <yogesh.upreti at gmail.com
> >wrote:
>
> > Hi Gopal,
> > Thanks for reply. Do you have a link where I can find cmake for qt 4.6.3
> ?
> >
> > On Fri, Sep 10, 2010 at 9:26 AM, Gopalakrishna Bhat <
> gopalakbhat at gmail.com
> > > wrote:
> >
> >> Hello,
> >>
> >> You can use cmake for your projects if you find qmake hanging.
> >>
> >> With regards,
> >> Gopalakrishna Bhat A
> >>
> >>   On Fri, Sep 10, 2010 at 12:38 PM, yogesh upreti <
> >> yogesh.upreti at gmail.com> wrote:
> >>
> >>>   Hallo group,
> >>> What are the other way to compile my project then qmake?
> >>> qmake is not working in my laptop anymore, whenever I start it hangs
> and
> >>> nothing happens.
> >>> Is there another way to build a project?
> >>>
> >>> Regards,
> >>> Yogesh Upreti
> >>>
> >>>
> >>> _______________________________________________
> >>> Qt-interest mailing list
> >>> Qt-interest at trolltech.com
> >>> http://lists.trolltech.com/mailman/listinfo/qt-interest
> >>>
> >>>
> >>
> >>
> >> --
> >> My blog http://gkbhat.blogspot.com
> >>
> >
> >
>
>
> --
> My blog http://gkbhat.blogspot.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.trolltech.com/pipermail/qt-interest/attachments/20100910/1b366714/attachment.html
>
> ------------------------------
>
> _______________________________________________
> Qt-interest mailing list
> Qt-interest at trolltech.com
> http://lists.trolltech.com/mailman/listinfo/qt-interest
>
>
> End of Qt-interest Digest, Vol 22, Issue 73
> *******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.qt-project.org/pipermail/qt-interest-old/attachments/20100910/c8ee43de/attachment.html

More information about the Qt-interest-old mailing list