[QtonPi] Bakeqtpi.bash script

[Chris Story]

On 10/03/2012 10:55 AM, mark at noakes.com wrote:
> OK...the install has completely locked up with the last entry on the
> screen being
>
> qmlvisitor.cpp
>
> Any suggestions as to what I might be missing here and what to
> install/fix to get around it?
>
> There are no error messages as the script just locked up and stopped.
>
> Mark
>
>
> On 10/3/12 1:39 PM, mark at noakes.com wrote:
>>
>> ...except that my version of 12.04 is also 32-bit. I burned the disc for
>> the old PC I have but used it for the Mac virtual machine fresh install.
>> will look at 64-bit if necessary.
>>
>> The script has failed a couple of times so far, but I've been able to
>> move to the next step by installing git-core and build-essential
>> (wouldn't accept gcc-c++ like centos does).
>>
>> ...still in progress.
>>
>> Mark
>>
>>
> _______________________________________________
> QtonPi mailing list
> QtonPi at qt-project.org
> http://lists.qt-project.org/mailman/listinfo/qtonpi

force shutdown, and increase the ram available, i saw that nearly every 
time until i did that...

on another note...

ubuntu 12.04 64 bit...

following errors...

  create mode 100644 config.tests/vfp3/vfp3.pro
Passed valid toolchain
./fixQualifiedLibraryPaths: line 15: 
/home/nbkhwjm/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-gcc: 
No such file or directory
Adjusting the symlinks in /mnt/rasp-pi-rootfs/usr/lib to be relative
./libudev.so
../../lib/arm-linux-gnueabihf/libudev.so.0.13.0
Testing for existence of potential debian multi-arch dir: 
/mnt/rasp-pi-rootfs/usr/lib/
Debian multiarch dir exists, adjusting
Adjusting the symlinks in /mnt/rasp-pi-rootfs/usr/lib/ to be relative
./configure: 2610: ./configure: 
/home/nbkhwjm/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-g++: 
not found
-reduce-exports was requested but this compiler does not support it
Re-run configure with -v for more information
Configuring QT Failed


So i removed "-reduce-exports" the build line in the scripts... 
re-ran...then...

passed valid toolchain
./fixQualifiedLibraryPaths: line 15: 
/home/nbkhwjm/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-gcc: 
No such file or directory
Adjusting the symlinks in /mnt/rasp-pi-rootfs/usr/lib to be relative
Testing for existence of potential debian multi-arch dir: 
/mnt/rasp-pi-rootfs/usr/lib/
Debian multiarch dir exists, adjusting
Adjusting the symlinks in /mnt/rasp-pi-rootfs/usr/lib/ to be relative
./configure: 2610: ./configure: 
/home/nbkhwjm/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-g++: 
not found
-reduce-relocations was requested but this compiler does not support it
Re-run configure with -v for more information
Configuring QT Failed

so removed "-reduce-relocations", then it started to compile but....

Could not determine the target architecture!
Turn on verbose messaging (-v) to see the final report.
The OpenGL ES 2.0 functionality test failed!
  You might need to modify the include and library search paths by editing
  QMAKE_INCDIR_OPENGL_ES2, QMAKE_LIBDIR_OPENGL_ES2 and 
QMAKE_LIBS_OPENGL_ES2 in
  /home/nbkhwjm/opt/qt5/qtbase/mkspecs/devices/linux-rasp-pi-g++.
Configuring QT Failed


Thats where im at...