[QtonPi] Problems with configure and fixing symlinks

[rodrigolopezescolar@gmail.com]

Hi, not at home now, but as soon as I come back, I will check it.

Thanks

Enviado desde mi HTC

----- Reply message -----
De: "Chris Griffiths" <cg6674 at gmail.com>
Para: "Rodrigo López" <rodrigolopezescolar at gmail.com>
CC: <qtonpi at qt-project.org>
Asunto: [QtonPi] Problems with configure and fixing symlinks
Fecha: dom., oct. 7, 2012 13:06
Could you confirm the SD card filesystem image is mounted on /mnt/rasp-pi-rootfs - What is the contents of /mnt/rasp-pi-rootfs
On 07/10/2012 8:24 PM, "Rodrigo López" <rodrigolopezescolar at gmail.com> wrote:

>

> Hello,

>

> I'd appreciate if someone could help me with this:

>

> To my surprise, the raspberry.org QtOnPi image lacks QtNetwork and QtMultimedia, so I decided to compile Qt5 on my own.

>

> I found two brilliant articles (http://qt-project.org/wiki/Qt5OnRaspberryPi and http://qt-project.org/wiki/RaspberryPi_Beginners_guide), but I'm having some troubles anyway.


>

> - The first one arises when fixing symlinks (please, see log below):

>

> rodrigo at ubuntu:~/rpi$ cross-compile-tools/fixQualifiedLibraryPaths /mnt/rasp-pi-rootfs ~/rpi/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-gcc

> Passed valid toolchain

> Adjusting the symlinks in /mnt/rasp-pi-rootfs/usr/lib to be relative

> cross-compile-tools/fixQualifiedLibraryPaths: línea 24: cd: /mnt/rasp-pi-rootfs/usr/lib: No existe el archivo o el directorio

> Testing for existence of potential debian multi-arch dir: /mnt/rasp-pi-rootfs/usr/lib/arm-linux-gnueabihf

>

> - Despite this log, I decided to go on, and found the next problem during configuration phase (please, see log below):

>

> Warning: Disabling pkg-config since PKG_CONFIG_LIBDIR is not set.

> Note: PKG_CONFIG_SYSROOT_DIR automatically set to /mnt/rasp-pi-rootfs

> Could not determine the target architecture!

> Turn on verbose messaging (-v) to see the final report.

> Project ERROR: Package libudev not found

> No QPA platform plugin enabled!

>  If you really want to build without a QPA platform plugin you must pass -no-qpa-platform-guard to configure. Doing this will

>  produce a Qt that can not run GUI applications.

>  The dependencies needed for xcb to build are listed in src/plugins/platforms/xcb/README

>

> Thanks in advance.

>

> Regards.

>

> Rod

>

> _______________________________________________

> QtonPi mailing list

> QtonPi at qt-project.org

> http://lists.qt-project.org/mailman/listinfo/qtonpi

>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.qt-project.org/pipermail/qtonpi/attachments/20121007/b78d6fdb/attachment.html