[Development] Building a QtAddon from git

[Christian Gagneraud]

On 08/10/2013 01:41 PM, Chris Craig wrote:

Hi Chris,

> Hate to reply to myself, but I made a typo.  Add that line to 
> .qmake.conf, not .qmake.cache.
It did the trick, thanks!

I tried to do the same for the qlogger module, but it didn't work:

krys at linux-z8sp:~/local/qt5/build> make -C qlogger/
make: Entering directory `/home/krys/local/qt5/build/qlogger'
Makefile:308: warning: overriding recipe for target `docs'
Makefile:302: warning: ignoring old recipe for target `docs'
cd src/ && ( test -e Makefile || 
/home/krys/local/qt5/build/qtbase/bin/qmake 
/home/krys/local/qt5/qlogger/src/src.pro -o Makefile ) && make -f Makefile
make[1]: Entering directory `/home/krys/local/qt5/build/qlogger/src'
cd logger/ && ( test -e Makefile || 
/home/krys/local/qt5/build/qtbase/bin/qmake 
/home/krys/local/qt5/qlogger/src/logger/logger.pro -o Makefile ) && make 
-f Makefile
Project MESSAGE: perl -w /home/krys/local/qt5/qtbase/bin/syncqt.pl 
-check-includes -module logger -version 5.0.0 -outdir 
/home/krys/local/qt5/build/qtbase /home/krys/local/qt5/qlogger
<srcbase> = /home/krys/local/qt5/qlogger
<outbase> = /home/krys/local/qt5/build/qtbase
No such module: logger at /home/krys/local/qt5/qtbase/bin/syncqt.pl line 
805.
Project ERROR: Failed to run: perl -w 
/home/krys/local/qt5/qtbase/bin/syncqt.pl -check-includes -module logger 
-version 5.0.0 -outdir /home/krys/local/qt5/build/qtbase 
/home/krys/local/qt5/qlogger
make[1]: *** [sub-logger-make_first-ordered] Error 3
make[1]: Leaving directory `/home/krys/local/qt5/build/qlogger/src'
make: *** [module-qlogger-src-make_first] Error 2
make: Leaving directory `/home/krys/local/qt5/build/qlogger'


Thanks,
Chris

>
> Chris
>
> On Fri, Aug 9, 2013 at 9:37 PM, Chris Craig <craig at ics.com 
> <mailto:craig at ics.com>> wrote:
>
>     Sigh.  I haven't tried building qtjsonstream with 5.1 yet.  It
>     looks like a MODULE_VERSION is now required in .qmake.conf.  Try
>     adding something like:
>
>     MODULE_VERSION = 5.1.1
>
>     to .qmake.cache
>
>     I am not sure what the correct value should be for a playground
>     module that is more or less stagnant should be.  Does it need to
>     get bumped with each release like the official modules?  Perhaps
>     Sergio, Ossi, or somebody else who does this stuff can chime in.
>
>     Once I figure out what the value should be, I'll change it in
>     qtjsonstream and qtprocessmanager.
>
>     Chris
>
>     On Sat, Aug 10, 2013 at 9:16 AM, Christian Gagneraud
>     <chgans at gna.org <mailto:chgans at gna.org>> wrote:
>
>         Hi,
>
>         I have been using qt5 stable git branch for a while now, and it's
>         relatively easy to update and rebuild.
>         However, I would like to build a couple of QtAddons, of which
>         qtjsonstream.
>         When pulled from git this module comes with a pro file that just
>         contains 1 line: "load(qt_parts)"
>         I tried naively to add this addon to my qt5 tree by doing:
>         - move qtjsonstream directory into qt5 dir
>         - add "addModule(qtjsonstream, qtbase)" in qt.pro <http://qt.pro>
>         - mkdir build
>         - cd build; ../configure [...]
>         - make
>
>         But unfortunately qtjsonstream didn't get built, if i cd into
>         qt5/build/qtjsonstream and issue a make command, i get the
>         following error:
>         krys at linux-z8sp:~/local/qt5/build/qtjsonstream> make
>         cd src/ && ( test -e Makefile ||
>         /home/krys/local/qt5/build/qtbase/bin/qmake
>         /home/krys/local/qt5/qtjsonstream/src/src.pro <http://src.pro>
>         -o Makefile ) && make -f
>         Makefile
>         make[1]: Entering directory
>         `/home/krys/local/qt5/build/qtjsonstream/src'
>         cd jsonstream/ && ( test -e Makefile ||
>         /home/krys/local/qt5/build/qtbase/bin/qmake
>         /home/krys/local/qt5/qtjsonstream/src/jsonstream/jsonstream.pro <http://jsonstream.pro>
>         -o
>         Makefile ) && make -f Makefile
>         Project ERROR: Module does not define version.
>         make[1]: *** [sub-jsonstream-make_first] Error 3
>         make[1]: Leaving directory
>         `/home/krys/local/qt5/build/qtjsonstream/src'
>         make: *** [sub-src-make_first] Error 2
>
>         I would like to add qlogger to my build too, but ran into similar
>         problems ...
>
>
>         Any hint or point out appreciated,
>         Chris
>
>         _______________________________________________
>         Development mailing list
>         Development at qt-project.org <mailto:Development at qt-project.org>
>         http://lists.qt-project.org/mailman/listinfo/development
>
>
>
>
>
> _______________________________________________
> Development mailing list
> Development at qt-project.org
> http://lists.qt-project.org/mailman/listinfo/development