[Development] Building a QtAddon from git

[Laszlo Papp]

diff --git a/src/logger/logger.pro b/src/logger/logger.pro
index 4dc96b9..d257ae5 100644
--- a/src/logger/logger.pro
+++ b/src/logger/logger.pro
@@ -1,6 +1,6 @@
-load(qt_module)

 TARGET = QtLogger
+load(qt_module)
 QPRO_PWD = $PWD
 CONFIG += module
 MODULE_PRI = ../../modules/qt_logger.pri



On Sat, Aug 10, 2013 at 4:46 PM, Christian Gagneraud <chgans at gna.org> wrote:

> On 08/10/2013 01:41 PM, Chris Craig wrote:
>
> Hi Chris,
>
> > Hate to reply to myself, but I made a typo.  Add that line to
> > .qmake.conf, not .qmake.cache.
> It did the trick, thanks!
>
> I tried to do the same for the qlogger module, but it didn't work:
>
> krys at linux-z8sp:~/local/qt5/build> make -C qlogger/
> make: Entering directory `/home/krys/local/qt5/build/qlogger'
> Makefile:308: warning: overriding recipe for target `docs'
> Makefile:302: warning: ignoring old recipe for target `docs'
> cd src/ && ( test -e Makefile ||
> /home/krys/local/qt5/build/qtbase/bin/qmake
> /home/krys/local/qt5/qlogger/src/src.pro -o Makefile ) && make -f Makefile
> make[1]: Entering directory `/home/krys/local/qt5/build/qlogger/src'
> cd logger/ && ( test -e Makefile ||
> /home/krys/local/qt5/build/qtbase/bin/qmake
> /home/krys/local/qt5/qlogger/src/logger/logger.pro -o Makefile ) && make
> -f Makefile
> Project MESSAGE: perl -w /home/krys/local/qt5/qtbase/bin/syncqt.pl
> -check-includes -module logger -version 5.0.0 -outdir
> /home/krys/local/qt5/build/qtbase /home/krys/local/qt5/qlogger
> <srcbase> = /home/krys/local/qt5/qlogger
> <outbase> = /home/krys/local/qt5/build/qtbase
> No such module: logger at /home/krys/local/qt5/qtbase/bin/syncqt.pl line
> 805.
> Project ERROR: Failed to run: perl -w
> /home/krys/local/qt5/qtbase/bin/syncqt.pl -check-includes -module logger
> -version 5.0.0 -outdir /home/krys/local/qt5/build/qtbase
> /home/krys/local/qt5/qlogger
> make[1]: *** [sub-logger-make_first-ordered] Error 3
> make[1]: Leaving directory `/home/krys/local/qt5/build/qlogger/src'
> make: *** [module-qlogger-src-make_first] Error 2
> make: Leaving directory `/home/krys/local/qt5/build/qlogger'
>
>
> Thanks,
> Chris
>
> >
> > Chris
> >
> > On Fri, Aug 9, 2013 at 9:37 PM, Chris Craig <craig at ics.com
> > <mailto:craig at ics.com>> wrote:
> >
> >     Sigh.  I haven't tried building qtjsonstream with 5.1 yet.  It
> >     looks like a MODULE_VERSION is now required in .qmake.conf.  Try
> >     adding something like:
> >
> >     MODULE_VERSION = 5.1.1
> >
> >     to .qmake.cache
> >
> >     I am not sure what the correct value should be for a playground
> >     module that is more or less stagnant should be.  Does it need to
> >     get bumped with each release like the official modules?  Perhaps
> >     Sergio, Ossi, or somebody else who does this stuff can chime in.
> >
> >     Once I figure out what the value should be, I'll change it in
> >     qtjsonstream and qtprocessmanager.
> >
> >     Chris
> >
> >     On Sat, Aug 10, 2013 at 9:16 AM, Christian Gagneraud
> >     <chgans at gna.org <mailto:chgans at gna.org>> wrote:
> >
> >         Hi,
> >
> >         I have been using qt5 stable git branch for a while now, and it's
> >         relatively easy to update and rebuild.
> >         However, I would like to build a couple of QtAddons, of which
> >         qtjsonstream.
> >         When pulled from git this module comes with a pro file that just
> >         contains 1 line: "load(qt_parts)"
> >         I tried naively to add this addon to my qt5 tree by doing:
> >         - move qtjsonstream directory into qt5 dir
> >         - add "addModule(qtjsonstream, qtbase)" in qt.pro <http://qt.pro
> >
> >         - mkdir build
> >         - cd build; ../configure [...]
> >         - make
> >
> >         But unfortunately qtjsonstream didn't get built, if i cd into
> >         qt5/build/qtjsonstream and issue a make command, i get the
> >         following error:
> >         krys at linux-z8sp:~/local/qt5/build/qtjsonstream> make
> >         cd src/ && ( test -e Makefile ||
> >         /home/krys/local/qt5/build/qtbase/bin/qmake
> >         /home/krys/local/qt5/qtjsonstream/src/src.pro <http://src.pro>
> >         -o Makefile ) && make -f
> >         Makefile
> >         make[1]: Entering directory
> >         `/home/krys/local/qt5/build/qtjsonstream/src'
> >         cd jsonstream/ && ( test -e Makefile ||
> >         /home/krys/local/qt5/build/qtbase/bin/qmake
> >         /home/krys/local/qt5/qtjsonstream/src/jsonstream/jsonstream.pro<
> http://jsonstream.pro>
> >         -o
> >         Makefile ) && make -f Makefile
> >         Project ERROR: Module does not define version.
> >         make[1]: *** [sub-jsonstream-make_first] Error 3
> >         make[1]: Leaving directory
> >         `/home/krys/local/qt5/build/qtjsonstream/src'
> >         make: *** [sub-src-make_first] Error 2
> >
> >         I would like to add qlogger to my build too, but ran into similar
> >         problems ...
> >
> >
> >         Any hint or point out appreciated,
> >         Chris
> >
> >         _______________________________________________
> >         Development mailing list
> >         Development at qt-project.org <mailto:Development at qt-project.org>
> >         http://lists.qt-project.org/mailman/listinfo/development
> >
> >
> >
> >
> >
> > _______________________________________________
> > Development mailing list
> > Development at qt-project.org
> > http://lists.qt-project.org/mailman/listinfo/development
>
> _______________________________________________
> Development mailing list
> Development at qt-project.org
> http://lists.qt-project.org/mailman/listinfo/development
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/development/attachments/20130810/d382850c/attachment.html>