[Development] Building a QtAddon from git
Christian Gagneraud
chgans at gna.org
Sat Aug 10 20:21:32 CEST 2013
On 08/10/2013 05:38 PM, Laszlo Papp wrote:
> diff --git a/src/logger/logger.pro <http://logger.pro>
> b/src/logger/logger.pro <http://logger.pro>
> index 4dc96b9..d257ae5 100644
> --- a/src/logger/logger.pro <http://logger.pro>
> +++ b/src/logger/logger.pro <http://logger.pro>
> @@ -1,6 +1,6 @@
> -load(qt_module)
> TARGET = QtLogger
> +load(qt_module)
> QPRO_PWD = $PWD
> CONFIG += module
> MODULE_PRI = ../../modules/qt_logger.pri
>
Thanks Laszlo, it fixes the problem.
Chris
>
>
> On Sat, Aug 10, 2013 at 4:46 PM, Christian Gagneraud <chgans at gna.org
> <mailto:chgans at gna.org>> wrote:
>
> On 08/10/2013 01:41 PM, Chris Craig wrote:
>
> Hi Chris,
>
> > Hate to reply to myself, but I made a typo. Add that line to
> > .qmake.conf, not .qmake.cache.
> It did the trick, thanks!
>
> I tried to do the same for the qlogger module, but it didn't work:
>
> krys at linux-z8sp:~/local/qt5/build> make -C qlogger/
> make: Entering directory `/home/krys/local/qt5/build/qlogger'
> Makefile:308: warning: overriding recipe for target `docs'
> Makefile:302: warning: ignoring old recipe for target `docs'
> cd src/ && ( test -e Makefile ||
> /home/krys/local/qt5/build/qtbase/bin/qmake
> /home/krys/local/qt5/qlogger/src/src.pro <http://src.pro> -o
> Makefile ) && make -f Makefile
> make[1]: Entering directory `/home/krys/local/qt5/build/qlogger/src'
> cd logger/ && ( test -e Makefile ||
> /home/krys/local/qt5/build/qtbase/bin/qmake
> /home/krys/local/qt5/qlogger/src/logger/logger.pro
> <http://logger.pro> -o Makefile ) && make
> -f Makefile
> Project MESSAGE: perl -w /home/krys/local/qt5/qtbase/bin/syncqt.pl
> <http://syncqt.pl>
> -check-includes -module logger -version 5.0.0 -outdir
> /home/krys/local/qt5/build/qtbase /home/krys/local/qt5/qlogger
> <srcbase> = /home/krys/local/qt5/qlogger
> <outbase> = /home/krys/local/qt5/build/qtbase
> No such module: logger at /home/krys/local/qt5/qtbase/bin/syncqt.pl
> <http://syncqt.pl> line
> 805.
> Project ERROR: Failed to run: perl -w
> /home/krys/local/qt5/qtbase/bin/syncqt.pl <http://syncqt.pl>
> -check-includes -module logger
> -version 5.0.0 -outdir /home/krys/local/qt5/build/qtbase
> /home/krys/local/qt5/qlogger
> make[1]: *** [sub-logger-make_first-ordered] Error 3
> make[1]: Leaving directory `/home/krys/local/qt5/build/qlogger/src'
> make: *** [module-qlogger-src-make_first] Error 2
> make: Leaving directory `/home/krys/local/qt5/build/qlogger'
>
>
> Thanks,
> Chris
>
> >
> > Chris
> >
> > On Fri, Aug 9, 2013 at 9:37 PM, Chris Craig <craig at ics.com
> <mailto:craig at ics.com>
> > <mailto:craig at ics.com <mailto:craig at ics.com>>> wrote:
> >
> > Sigh. I haven't tried building qtjsonstream with 5.1 yet. It
> > looks like a MODULE_VERSION is now required in .qmake.conf. Try
> > adding something like:
> >
> > MODULE_VERSION = 5.1.1
> >
> > to .qmake.cache
> >
> > I am not sure what the correct value should be for a playground
> > module that is more or less stagnant should be. Does it need to
> > get bumped with each release like the official modules? Perhaps
> > Sergio, Ossi, or somebody else who does this stuff can chime in.
> >
> > Once I figure out what the value should be, I'll change it in
> > qtjsonstream and qtprocessmanager.
> >
> > Chris
> >
> > On Sat, Aug 10, 2013 at 9:16 AM, Christian Gagneraud
> > <chgans at gna.org <mailto:chgans at gna.org>
> <mailto:chgans at gna.org <mailto:chgans at gna.org>>> wrote:
> >
> > Hi,
> >
> > I have been using qt5 stable git branch for a while now,
> and it's
> > relatively easy to update and rebuild.
> > However, I would like to build a couple of QtAddons, of which
> > qtjsonstream.
> > When pulled from git this module comes with a pro file
> that just
> > contains 1 line: "load(qt_parts)"
> > I tried naively to add this addon to my qt5 tree by doing:
> > - move qtjsonstream directory into qt5 dir
> > - add "addModule(qtjsonstream, qtbase)" in qt.pro
> <http://qt.pro> <http://qt.pro>
> > - mkdir build
> > - cd build; ../configure [...]
> > - make
> >
> > But unfortunately qtjsonstream didn't get built, if i cd into
> > qt5/build/qtjsonstream and issue a make command, i get the
> > following error:
> > krys at linux-z8sp:~/local/qt5/build/qtjsonstream> make
> > cd src/ && ( test -e Makefile ||
> > /home/krys/local/qt5/build/qtbase/bin/qmake
> > /home/krys/local/qt5/qtjsonstream/src/src.pro
> <http://src.pro> <http://src.pro>
> > -o Makefile ) && make -f
> > Makefile
> > make[1]: Entering directory
> > `/home/krys/local/qt5/build/qtjsonstream/src'
> > cd jsonstream/ && ( test -e Makefile ||
> > /home/krys/local/qt5/build/qtbase/bin/qmake
> >
> /home/krys/local/qt5/qtjsonstream/src/jsonstream/jsonstream.pro
> <http://jsonstream.pro> <http://jsonstream.pro>
> > -o
> > Makefile ) && make -f Makefile
> > Project ERROR: Module does not define version.
> > make[1]: *** [sub-jsonstream-make_first] Error 3
> > make[1]: Leaving directory
> > `/home/krys/local/qt5/build/qtjsonstream/src'
> > make: *** [sub-src-make_first] Error 2
> >
> > I would like to add qlogger to my build too, but ran into
> similar
> > problems ...
> >
> >
> > Any hint or point out appreciated,
> > Chris
> >
> > _______________________________________________
> > Development mailing list
> > Development at qt-project.org <mailto:Development at qt-project.org>
> <mailto:Development at qt-project.org <mailto:Development at qt-project.org>>
> > http://lists.qt-project.org/mailman/listinfo/development
> >
> >
> >
> >
> >
> > _______________________________________________
> > Development mailing list
> > Development at qt-project.org <mailto:Development at qt-project.org>
> > http://lists.qt-project.org/mailman/listinfo/development
>
> _______________________________________________
> Development mailing list
> Development at qt-project.org <mailto:Development at qt-project.org>
> http://lists.qt-project.org/mailman/listinfo/development
>
>
More information about the Development
mailing list