[Development] Setup QT creator for developing QT apps on wandboard-Error

[Nilesh Kokane]

Hi Christian,

First of all thanks for your valuable reply.

Based on your  suggestion I pinged the board with the boards ip address
which i found it from the serial console

$ ping 127.0.0.1

gave success

Also i pinged the host PC trough the board with

$ ping 127.0.0.2

Gave success

But with SSH from the host

$ ssh root at 127.0.0.1


Connecting to host...

SSH connection failure: Connection refused




$ find
/home/minda/bin/fsl-community-
bsp/build/tmp/sysroots/wandboard-solo
-name libicui18n.so.51 -o -name libz.so.1


/tmp/sysroots/wandboard-solo -name libicui18n.so.51 -o -name libz.so.1
/home/minda/bin/fsl-community-bsp/build/tmp/sysroots/wandboard-solo/lib/libz.so.1
/home/minda/bin/fsl-community-bsp/build/tmp/sysroots/wandboard-solo/usr/lib/libicui18n.so.51



What does this command gives?
$ sh -x ./qtcreator.sh


+ source
/opt/poky/1.4.1/environment-setup-armv7a-vfp-neon-poky-linux-gnueabi
./qtcreator.sh: 2: ./qtcreator.sh: source: not found
+ which ./qtcreator.sh
+ me=./qtcreator.sh
+ test -L ./qtcreator.sh
+ dirname ./qtcreator.sh
+ bindir=.
+ cd ./../lib
+ pwd
+ libdir=/home/minda/Qt5.3.1/Tools/QtCreator/lib
+
LD_LIBRARY_PATH=/home/minda/Qt5.3.1/Tools/QtCreator/lib:/home/minda/Qt5.3.1/Tools/QtCreator/lib/qtcreator
+ export LD_LIBRARY_PATH
+ exec ./qtcreator
minda at minda-HP-dx2480-MT-VP562PA:~/Qt5.3.1/Tools/QtCreator/bin$ sh -x
./qtcreator.sh
+ source
/opt/poky/1.4.1/environment-setup-armv7a-vfp-neon-poky-linux-gnueabi
./qtcreator.sh: 2: ./qtcreator.sh: source: not found
+ which ./qtcreator.sh
+ me=./qtcreator.sh
+ test -L ./qtcreator.sh
+ dirname ./qtcreator.sh
+ bindir=.
+ cd ./../lib
+ pwd
+ libdir=/home/minda/Qt5.3.1/Tools/QtCreator/lib
+
LD_LIBRARY_PATH=/home/minda/Qt5.3.1/Tools/QtCreator/lib:/home/minda/Qt5.3.1/Tools/QtCreator/lib/qtcreator
+ export LD_LIBRARY_PATH
+ exec ./qtcreator



And opens up the Qt-creator


Have you tried the "bitbake meta-toolchain-qt5" command?

No i didn't tried , can you please provide the step for that



Thanks
Nilesh Kokane


On Tue, Jul 29, 2014 at 10:36 AM, Christian Gagneraud <chgans at gna.org>
wrote:

> On 29/07/2014 4:46 p.m., Nilesh Kokane wrote:
> [...]
> > Manage:
> > Name:wandboard-solo
> > Authentication type :password
> > Host Name:minda-HP-dx2480-MT-VP562PA
> > SSH port:22
> > usearname:root
> > Password:
> >
> > 1)With that when i tried to test  the device with the ethernet
> > connection i'm getting the following error
> >
> > Error:
> > Connecting to host...
> > SSH connection failure: Connection refused
> >
> > Device test failed.
>
> Did you first manually test the connection to your board?
> How does the hostname minda-HP-dx2480-MT-VP562PA get resolved?
>
> Can you even ping the board? can you even log remotely to the board?
>
> try these first:
> $ ping minda-HP-dx2480-MT-VP562PA
>
> and if it works, try this:
> $ ssh root at minda-HP-dx2480-MT-VP562PA
>
> If the above two tests pass, then QtCreator should be able to connect too.
>
> Well, according to the doc you've cited, you need to use the IP address
> of the board, and in order to know its IP address you need to log
> through a serial console, and check it's ip address with the ifconfig
> command (as explained in the doc)
>
> Chris
>
> _______________________________________________
> Development mailing list
> Development at qt-project.org
> http://lists.qt-project.org/mailman/listinfo/development
>



-- 
Thanks

-- 
“The contents of this e-mail message and any attachments are confidential 
and are intended solely for addressee. The information may also be legally 
privileged. This transmission is sent in trust, for the sole purpose of 
delivery to the intended recipient. If you have received this transmission 
in error, any use, reproduction or dissemination of this transmission is 
strictly prohibited. If you are not the intended recipient, please 
immediately notify the sender by reply e-mail or phone and delete this 
message and its attachments, if any.”
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/development/attachments/20140729/22353c56/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 67631 bytes
Desc: not available
URL: <http://lists.qt-project.org/pipermail/development/attachments/20140729/22353c56/attachment.png>