[Interest] Qt 5.x from git for commercial licensees (Windows)

[Mitch Curtis]

> -----Original Message-----
> From: Interest [mailto:interest-bounces+mitch.curtis=qt.io at qt-project.org]
> On Behalf Of Rainer Wiesenfarth
> Sent: Monday, 2 May 2016 11:47 AM
> To: interest at qt-project.org
> Subject: [Interest] Qt 5.x from git for commercial licensees (Windows)
> 
> Hi all,
> 
> is there any commercial licensee out there who built his Qt 5.x (in my
> case: 5.6.0) version from a git clone on Windows?
> 
> I am currently struggling in making the configure executable locate and
> use my license information. Unfortunately this part of the configuration
> is not documented very well...

Are you referring to this section?

http://doc.qt.io/qt-5/windows-building.html#step-1-install-the-license-file-commercial-editions-only

> Best Regards / Mit freundlichen Grüßen
> Rainer Wiesenfarth
> 
> --
> Software Engineer | Trimble Imaging Division Rotebühlstraße 81 | 70178
> Stuttgart | Germany Office +49 711 22881 0 | Fax +49 711 22881 11
> http://www.trimble.com/imaging/ | http://www.inpho.de/
> 
> Trimble Germany GmbH, Am Prime Parc 11, 65479 Raunheim Eingetragen beim
> Amtsgericht Darmstadt unter HRB 83893,
> Geschäftsführer: Dr. Frank Heimberg, Hans-Jürgen Gebauer
> 
> 
> _______________________________________________
> Interest mailing list
> Interest at qt-project.org
> http://lists.qt-project.org/mailman/listinfo/interest