[Interest] Qt 6.5.4-LTS from source -> fatal: Unable to find current revision in submodule path 'qt5compat'

Nuno Santos nuno.santos at imaginando.pt
Fri Feb 9 11:15:42 CET 2024 

I’m trying as an alternative to build 6.6.1 from source but I’m also having this:

+ git submodule init tests/auto/qml/ecmascripttests/test262
 *** /qtdeclarative/tests/auto/qml/ecmascripttests/test262 not found, ignoring alternate for this submodule
+ git config remote.origin.url git://code.qt.io/qt/qtdeclarative-testsuites.git
+ git fetch origin
+ git config remote.gerrit.url ssh://codereview.qt-project.org/qt/qtdeclarative-testsuites.git
+ git config remote.gerrit.fetch +refs/heads/*:refs/remotes/gerrit/* /heads/
+ git submodule update --force --no-fetch
Submodule path 'tests/auto/qml/ecmascripttests/test262': checked out 'a0efb7e1ab1cee24c387abe1897ff18fa116c17d'
+ git config remote.gerrit.url ssh://codereview.qt-project.org/qt/qt5
+ git config remote.gerrit.fetch +refs/heads/*:refs/remotes/gerrit/* /heads/
Warning: cannot find Git hooks, qtrepotools module might be absent



> On 9 Feb 2024, at 10:05, Nuno Santos <nuno.santos at imaginando.pt> wrote:
> 
> Alexandru,
> 
> Same problem
> 
> ➜  6.5.4 git clone "ssh://sinosoidal@codereview.qt-project.org:29418/qt/tqtc-qt5"
> Cloning into 'tqtc-qt5'...
> remote: Counting objects: 189, done
> remote: Finding sources: 100% (32453/32453)
> remote: Total 32453 (delta 22269), reused 31126 (delta 22269)
> Receiving objects: 100% (32453/32453), 10.35 MiB | 16.92 MiB/s, done.
> Resolving deltas: 100% (22269/22269), done.
> warning: remote HEAD refers to nonexistent ref, unable to checkout
> ➜  6.5.4 cd tqtc-qt5
> ➜  tqtc-qt5 git:(main) git checkout origin/tqtc/lts-6.5.4
> Note: switching to 'origin/tqtc/lts-6.5.4'.
> 
> You are in 'detached HEAD' state. You can look around, make experimental
> changes and commit them, and you can discard any commits you make in this
> state without impacting any branches by switching back to a branch.
> 
> If you want to create a new branch to retain commits you create, you may
> do so (now or later) by using -c with the switch command. Example:
> 
>  git switch -c <new-branch-name>
> 
> Or undo this operation with:
> 
>  git switch -
> 
> Turn off this advice by setting config variable advice.detachedHead to false
> 
> HEAD is now at 3303dc7a Provisioning: Update Axivion bauhaus-suite
> ➜  tqtc-qt5 git:(3303dc7a) ./init-repository --module-subset=qt5compat
> + git submodule init qt5compat
> Submodule 'qt5compat' (ssh://sinosoidal@codereview.qt-project.org:29418/qt/tqtc-qt5compat.git) registered for path 'qt5compat'
> + git config commit.template /Users/nsantos/Qt/6.5.4/tqtc-qt5/.commit-template
> + git clone --no-checkout ssh://sinosoidal@codereview.qt-project.org:29418/qt/tqtc-qt5compat.git qt5compat
> Cloning into 'qt5compat'...
> remote: Counting objects: 29, done
> remote: Finding sources: 100% (6700/6700)
> remote: Total 6700 (delta 3705), reused 6477 (delta 3705)
> Receiving objects: 100% (6700/6700), 15.95 MiB | 20.39 MiB/s, done.
> Resolving deltas: 100% (3705/3705), done.
> + git config commit.template /Users/nsantos/Qt/6.5.4/tqtc-qt5/.commit-template
> + git config remote.gerrit.url ssh://codereview.qt-project.org/qt/tqtc-qt5compat.git
> + git config remote.gerrit.fetch +refs/heads/*:refs/remotes/gerrit/* /heads/
> + git submodule update --force --no-fetch
> fatal: Unable to find current revision in submodule path 'qt5compat'
> git submodule update --force --no-fetch exited with status 32768 at ./init-repository line 207.
> 	Qt::InitRepository::exe(Qt::InitRepository=HASH(0x15980bdd8), "git", "submodule", "update", "--force", "--no-fetch") called at ./init-repository line 452
> 	Qt::InitRepository::git_clone_all_submodules(Qt::InitRepository=HASH(0x15980bdd8), "tqtc-qt5", 0, "", "qt5compat") called at ./init-repository line 674
> 	Qt::InitRepository::run(Qt::InitRepository=HASH(0x15980bdd8)) called at ./init-repository line 685
> ➜  tqtc-qt5 git:(3303dc7a)
> 
>> On 9 Feb 2024, at 09:52, Alexandru Croitor <alexandru.croitor at qt.io> wrote:
>> 
>> Hi,
>> 
>> I just tried the following sequence of commands locally with no pre-existing directory, and everything worked fine.
>> 
>> git clone "ssh://<my-username>@codereview.qt-project.org:29418/qt/tqtc-qt5" qt6_new
>> cd qt6_new
>> git checkout origin/tqtc/lts-6.5.4
>> ./init-repository --module-subset=qt5compat
>> 
>> Can you confirm whether the same works for you, to figure out whether this is a general issue, or an issue with the state of your pre-existing checkout?
>> 
>> Also please show the output of running 'git rev-parse HEAD' in your pre-existing qt5compat directory and in your tqtc-qt5 directory.
>> 
>> 
>>> On 9. Feb 2024, at 10:33, Nuno Santos via Interest <interest at qt-project.org> wrote:
>>> 
>>> Thiago,
>>> 
>>> Doing just:
>>> 
>>> git submodule init qt5compat does nothing, the directory remains empty
>>> 
>>> Curiously it says the same thing as the perl init repository if I do:
>>> 
>>> git submodule update --init --recursive qt5compat
>>> 
>>> fatal: Unable to find current revision in submodule path ‘qt5compat’
>>> 
>>> ➜  tqtc-qt5 git:(v6.5.4-lts) ✗ cat .gitmodules | grep qt5compat
>>> [submodule "qt5compat"]
>>> path = qt5compat
>>> url = ../tqtc-qt5compat.git
>>> alias = qt/qt5compat
>>> 
>>> Any ideas?
>>> 
>>> Best,
>>> 
>>> Nuno
>>> 
>>> 
>>>> On 9 Feb 2024, at 00:37, Thiago Macieira <thiago.macieira at intel.com> wrote:
>>>> 
>>>> On Thursday, 8 February 2024 13:28:10 PST Nuno Santos via Interest wrote:
>>>>> One question. I’m not interested in all the modules. Just some of them. If I
>>>>> do that I will unit all the modules and therefore the build will contain
>>>>> them all right?
>>>> 
>>>> Correct.
>>>> 
>>>> You can do "git submodule init" for each of the modules you want.
>>>> 
>>>> Alternatively, you can clone and build just the modules you want. You don't 
>>>> need the top-level dir.
>>>> 
>>>> -- 
>>>> Thiago Macieira - thiago.macieira (AT) intel.com
>>>> Cloud Software Architect - Intel DCAI Cloud Engineering
>>>> _______________________________________________
>>>> Interest mailing list
>>>> Interest at qt-project.org
>>>> https://lists.qt-project.org/listinfo/interest
>>> 
>>> _______________________________________________
>>> Interest mailing list
>>> Interest at qt-project.org
>>> https://lists.qt-project.org/listinfo/interest
>> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/interest/attachments/20240209/f3efded1/attachment.htm>

More information about the Interest mailing list