[Qt-creator] QT Creator, compiling and deploying a c or c++ to a remote device (BeagleBone or R pi)

[Davide Picchi]

Sorry I don't understand you.
Do I need to recompile qt for the target architecture or not ?

2015-09-27 12:05 GMT+02:00 Orgad Shaneh <orgads at gmail.com>:

> On Sun, Sep 27, 2015 at 11:33 AM, Davide Picchi <paveway at gmail.com> wrote:
>
>> I'm trying since days to write and develop programs on my host pc (Ubuntu
>> 64bit) using qt-creator for my beaglebone and raspberry pi devices. I
>> looked for 'qt-creator cross compile beagle, raspberry etc...' and it leads
>> me to hundred of links and tutorial on *how to compile qt-creator for my
>> target plattform*. But seriously, that not my idea. All what I want is
>> to simply use my pc for developing my programs and lately deploy them to
>> the remote device.
>>
>> So first of all a noob question: *Is something wrong with my idea?
>> Should I really compile the source of qt for beaglebone or raspberry on my
>> pc for writing programs which lately should be run on that devices????*
>>
>> I will not compile qt-creator again for another plattform, so I don't
>> know how to find the right way. A lot of informations on internet are
>> misleading.
>>
>> So after many hours spend look for the right information I come up with
>> the following procedure:
>>
>> first I installed a arm-gnu toolchain on my 64bit Ubuntu.
>>
>> $sudo apt-get install build-essential libc6-armhf-cross libc6-dev-armhf-cross binutils-arm-linux-gnueabihf linux-libc-dev-armhf-cross libstdc++6-armhf-cross gcc-4.8-arm-linux-gnueabihf g++-4.8-arm-linux-gnueabihf
>>
>> then I installed qt-creator from the repository on my Ubuntu:
>>
>> $sudo apt-get install qtcreator
>>
>> I tried to configure to use qt for compiling my projects using the toolchain for arm (see following pictures)
>>
>> Screenshot #1 <http://s29.postimg.org/6qqre3d3r/hb3_FV.png>
>>
>> and here:
>>
>> Screenshot #2 <http://s15.postimg.org/w5hqqu8kb/v_Yf_JB.png>
>>
>> but it seems that qt-creator doesn't recognize the new kit when I start a new project:
>>
>> Screenshot #3 <http://s24.postimg.org/deta1gnf9/Fx_My_Q.png>
>>
>> Now: I m really confused, I could think that the problem is related to
>> qt, but I m not sure, whether the way of thinking, that I can compile on
>> ubuntu 64bit and then run my application on the remote device is right or
>> not.
>>
>> For this reason it would be nice if you can answer the question above.
>>
>> Furthermore: I tried adding a QT-version to my kit and in this case it
>> happens that the gnueabi compiler conflicts with that options and the
>> following problem arises:
>>
>> Screenshot #4 <http://s24.postimg.org/j4e3ziiz9/v_FS70.png>
>>
>> I would like to say again that I don't need to use qt-library or
>> something like that on my remote device. I need just to use the qt-IDE as
>> IDE for my projects (mainly c or c++ plain projects)
>>
>> Thanks and regards
>>
> Maybe try using qbs instead of qmake?
>
> - Orgad
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/qt-creator/attachments/20150927/3cfd2b4e/attachment.html>