[Releasing] Late serial port change into 5.1.0

[Turunen Tuukka]

This is something we need to decide together. While maintaining SC and BC is very important, I think we should allow some flexibility when it comes to add-on modules.

Yours,

--

Tuukka Turunen
Director, R&D
Digia, Qt

Address: Piippukatu 11, 40100 Jyväskylä, FINLAND
Email: tuukka.turunen at digia.com<mailto:tuukka.turunen at digia.com>
Mobile: + 358 40 7655 800

Qt Website: http://qt.digia.com
Qt Blog: http://blog.qt.digia.com
Qt Project: http://www.qt-project.org

------------------------------------------------------------------
PRIVACY AND CONFIDENTIALITY NOTICE
This message and any attachments are intended only for use by the named addressee and may contain privileged and/or confidential information. If you are not the named addressee you should not disseminate, copy or take any action in reliance on it. If you have received this message in error, please contact the sender immediately and delete the message and any attachments accompanying it. Digia Plc does not accept liability for any corruption, interception, amendment, tampering or viruses occurring to this message.
------------------------------------------------------------------

From: djszapi at archlinux.us [mailto:djszapi at archlinux.us] On Behalf Of Laszlo Papp
Sent: 2. heinäkuuta 2013 17:10
To: Turunen Tuukka
Cc: Heikkinen Jani; releasing at qt-project.org
Subject: Re: [Releasing] Late serial port change into 5.1.0

What flexibility exactly do you mean?
* BC break?
* Workaround based on the assumption it is not a commonly used module?
* Something else?

On Tue, Jul 2, 2013 at 1:49 PM, Turunen Tuukka <Tuukka.Turunen at digia.com<mailto:Tuukka.Turunen at digia.com>> wrote:

Stopping 5.1 release now means quite big delay, and also likely delay to upcoming releases.

Serial port is an add-on and thus we should have quite good flexibility to change things in it.

Yours,

--

Tuukka Turunen
Director, R&D
Digia, Qt

Address: Piippukatu 11, 40100 Jyväskylä, FINLAND
Email: tuukka.turunen at digia.com<mailto:tuukka.turunen at digia.com>
Mobile: + 358 40 7655 800

Qt Website: http://qt.digia.com
Qt Blog: http://blog.qt.digia.com
Qt Project: http://www.qt-project.org

------------------------------------------------------------------
PRIVACY AND CONFIDENTIALITY NOTICE
This message and any attachments are intended only for use by the named addressee and may contain privileged and/or confidential information. If you are not the named addressee you should not disseminate, copy or take any action in reliance on it. If you have received this message in error, please contact the sender immediately and delete the message and any attachments accompanying it. Digia Plc does not accept liability for any corruption, interception, amendment, tampering or viruses occurring to this message.
------------------------------------------------------------------

From: releasing-bounces+tuukka.turunen=digia.com at qt-project.org<mailto:digia.com at qt-project.org> [mailto:releasing-bounces+tuukka.turunen<mailto:releasing-bounces%2Btuukka.turunen>=digia.com at qt-project.org<mailto:digia.com at qt-project.org>] On Behalf Of Laszlo Papp
Sent: 2. heinäkuuta 2013 16:41
To: Heikkinen Jani
Cc: releasing at qt-project.org<mailto:releasing at qt-project.org>
Subject: Re: [Releasing] Late serial port change into 5.1.0

I have not had access rights until now to change the priority. It is not possible anymore?
What would be the nice fix in Qt 5.1.1?

On Tue, Jul 2, 2013 at 1:38 PM, Heikkinen Jani <Jani.Heikkinen at digia.com<mailto:Jani.Heikkinen at digia.com>> wrote:
Unfortunately this is too late for getting in Qt5.1.0, sorry. Packages are already done and this issue isn't even P0 so it won't block the release. But why not fix this in qt5.1.1?

Br,
Jani

From: releasing-bounces+jani.heikkinen=digia.com at qt-project.org<mailto:digia.com at qt-project.org> [mailto:releasing-bounces+jani.heikkinen<mailto:releasing-bounces%2Bjani.heikkinen>=digia.com at qt-project.org<mailto:digia.com at qt-project.org>] On Behalf Of Laszlo Papp
Sent: 2. heinäkuuta 2013 16:31
To: releasing at qt-project.org<mailto:releasing at qt-project.org>
Subject: [Releasing] Late serial port change into 5.1.0

Hi,
Would it be possible to include a change later today based on this one?

https://codereview.qt-project.org/#change,59817
It is either now, or Qt6, as far as I can tell, but if you have ideas how it can be solved nicely later, that is also fine.
Cheers,
Laszlo


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/releasing/attachments/20130702/22a18df3/attachment.html>