[Accessibility] [Yocto Embedded Linux Device] Help getting started with QT Accessibility

[Frederik Gladhorn]

Hi Brownson,

On onsdag 25. oktober 2017 07.38.47 CEST 오벨레브라운슨 wrote:
> Hi Frederik,
> 
> My name is Brownson and i'm the test automation development lead for my
> team.
 
> Our company is developing some new product lines, all running on embedded
> linux (yocto) with applications developed in QT.
 
> To enable me efficiently test the GUIs on these QT-based embedded linux
> products, i started looking at QT accessibility which led me to Frederik
> Gladhorn's blog (http://blog.qt.io/blog/author/frederik/).
 
> Although I have read most of the articles on that blog, i'm still not able
> to make much progress on my own.
> I have also reached out to QT Korea since
> i'm based in South Korea but they're not much of a help. I suspect they
> don't have much experience with accessibility either. 
> So i need help getting started. For one, i observed that the at-spi2 service
> is refusing to start on my embedded linux system so i probably need to
> start from getting that resolved. Not sure exactly. I would appreciate some
> help and guidance and how to get started etc.

To be honest, I haven't tried running the at-spi 2 service on any embedded 
hardware. I don't see it as a problem conceptually though, it's something to 
debug if it doesn't work. Note that it's not a Qt project and we only 
implement the required dbus interface.

Another alternative could be to use Froglogic's Squish or use the DBus API 
directly. I'll also answer you in private about services from The Qt Company.

Cheers,
Frederik

 
> Any help and leads would be highly appreciated. Thanks a lot in advance.
> 
> Best wishes,
> 
> Brownson
> 
> 
> 
> 
> 
> 오벨레브라운슨   OBELE BROWNSON OBARIDOA
> 
> 책임연구원 | SW검증팀   Principal Research Engineer | SW VERIFICATION AND VALIDATION
> TEAM
 
> 
> Hyundai Mobis Co., Ltd.
> T 031-8021-3803 | F 031-899-1797 | M 010-2492-4870 | E brownson at mobis.co.kr
> www.mobis.co.kr
> 
>         [로고]
> 
> 
> 
> 
>