[Development] Ynt: Boot to Qt Device problem.
Bahadır Can
bahadir.can at outlook.com
Thu Jul 21 13:28:39 CEST 2016
I can't check if the uboot is too old because board can't boot itself when i use flashboot image of Qt. So I can't update uboot from sd card too. It does nothing basically.
Also uboot is working at yocto images if it shows it is okay.
________________________________
Gönderen: Bahadır Can <bahadir.can at outlook.com>
Gönderildi: 20 Temmuz 2016 Çarşamba 16:41:49
Kime: development at qt-project.org
Konu: Boot to Qt Device problem.
Hello Qt Developers Team,
I am currently working on a Sabre Automative Board with i.MX6Quad. I just started to use Qt Embedded .
I am following this guide :
http://doc.qt.io/QtForDeviceCreation/qtee-preparing-hardware-imx6sabresd.html
I insterted a clean SD card to my device and run the flash boot to Qt Device. (with the option Sabre SD i.MX6Quad)
After installation of image finished. I inserted SD card to Board and restarted the board but nothing happened. (Terminal and screen didn't work.)
I also tried it with a beaglebone black but got nothing on it too.
Am I missing any steps?
Thanks from now.
Bahadır
Preparing SABRE SD i.MX6Quad | Qt 5.7 for Device Creation<http://doc.qt.io/QtForDeviceCreation/qtee-preparing-hardware-imx6sabresd.html>
doc.qt.io
Take the following steps to prepare Freescale SABRE SD i.MX6Quad for Boot to Qt: Note: It is important that you repeat the steps in this section after you update Qt ...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.qt-project.org/pipermail/development/attachments/20160721/cd22af23/attachment.html>
More information about the Development
mailing list